accel7 2.0.0.0
Macros
Interrupt Control Register 2
Accel 7 Click Driver » Macros

Macros

#define ACCEL7_INT_CTRL_REG2_ULMODE_ENABLE   0x80
 
#define ACCEL7_INT_CTRL_REG2_ULMODE_DISABLE   0x00
 
#define ACCEL7_INT_CTRL_REG2_X_NEGATIVE_ENABLE   0x20
 
#define ACCEL7_INT_CTRL_REG2_X_NEGATIVE_DISABLE   0x00
 
#define ACCEL7_INT_CTRL_REG2_Y_NEGATIVE_ENABLE   0x08
 
#define ACCEL7_INT_CTRL_REG2_Y_NEGATIVE_DISABLE   0x00
 
#define ACCEL7_INT_CTRL_REG2_Z_NEGATIVE_ENABLE   0x02
 
#define ACCEL7_INT_CTRL_REG2_Z_NEGATIVE_DISABLE   0x00
 
#define ACCEL7_INT_CTRL_REG2_X_POSITIVE_ENABLE   0x10
 
#define ACCEL7_INT_CTRL_REG2_X_POSITIVE_DISABLE   0x00
 
#define ACCEL7_INT_CTRL_REG2_Y_POSITIVE_ENABLE   0x04
 
#define ACCEL7_INT_CTRL_REG2_Y_POSITIVE_DISABLE   0x00
 
#define ACCEL7_INT_CTRL_REG2_Z_POSITIVE_ENABLE   0x01
 
#define ACCEL7_INT_CTRL_REG2_Z_POSITIVE_DISABLE   0x00
 

Detailed Description

Macro Definition Documentation

◆ ACCEL7_INT_CTRL_REG2_ULMODE_DISABLE

#define ACCEL7_INT_CTRL_REG2_ULMODE_DISABLE   0x00

◆ ACCEL7_INT_CTRL_REG2_ULMODE_ENABLE

#define ACCEL7_INT_CTRL_REG2_ULMODE_ENABLE   0x80

◆ ACCEL7_INT_CTRL_REG2_X_NEGATIVE_DISABLE

#define ACCEL7_INT_CTRL_REG2_X_NEGATIVE_DISABLE   0x00

◆ ACCEL7_INT_CTRL_REG2_X_NEGATIVE_ENABLE

#define ACCEL7_INT_CTRL_REG2_X_NEGATIVE_ENABLE   0x20

◆ ACCEL7_INT_CTRL_REG2_X_POSITIVE_DISABLE

#define ACCEL7_INT_CTRL_REG2_X_POSITIVE_DISABLE   0x00

◆ ACCEL7_INT_CTRL_REG2_X_POSITIVE_ENABLE

#define ACCEL7_INT_CTRL_REG2_X_POSITIVE_ENABLE   0x10

◆ ACCEL7_INT_CTRL_REG2_Y_NEGATIVE_DISABLE

#define ACCEL7_INT_CTRL_REG2_Y_NEGATIVE_DISABLE   0x00

◆ ACCEL7_INT_CTRL_REG2_Y_NEGATIVE_ENABLE

#define ACCEL7_INT_CTRL_REG2_Y_NEGATIVE_ENABLE   0x08

◆ ACCEL7_INT_CTRL_REG2_Y_POSITIVE_DISABLE

#define ACCEL7_INT_CTRL_REG2_Y_POSITIVE_DISABLE   0x00

◆ ACCEL7_INT_CTRL_REG2_Y_POSITIVE_ENABLE

#define ACCEL7_INT_CTRL_REG2_Y_POSITIVE_ENABLE   0x04

◆ ACCEL7_INT_CTRL_REG2_Z_NEGATIVE_DISABLE

#define ACCEL7_INT_CTRL_REG2_Z_NEGATIVE_DISABLE   0x00

◆ ACCEL7_INT_CTRL_REG2_Z_NEGATIVE_ENABLE

#define ACCEL7_INT_CTRL_REG2_Z_NEGATIVE_ENABLE   0x02

◆ ACCEL7_INT_CTRL_REG2_Z_POSITIVE_DISABLE

#define ACCEL7_INT_CTRL_REG2_Z_POSITIVE_DISABLE   0x00

◆ ACCEL7_INT_CTRL_REG2_Z_POSITIVE_ENABLE

#define ACCEL7_INT_CTRL_REG2_Z_POSITIVE_ENABLE   0x01