Settings for registers of AlphaNum G 2 Click driver. More...

Macros
#define	ALPHANUMG2_NIBBLE_LOW 0x000Fu
	AlphaNum G 2 data bit mask.

#define	ALPHANUMG2_BYTE_LOW 0x00FFu

#define	ALPHANUMG2_WORD_BIT_POS_0 0x0001u

#define	ALPHANUMG2_WORD_BIT_POS_14 0x4000u

#define	ALPHANUMG2_WORD_BIT_POS_15 0x8000u

#define	ALPHANUMG2_BRIGHTNESS_MIN 0x0000u
	AlphaNum G 2 brightness range data values.

#define	ALPHANUMG2_BRIGHTNESS_MAX 0x0FFFu

#define	ALPHANUMG2_DEFAULT_DUR_1000_MS 1000
	AlphaNum G 2 default character duration.

#define	ALPHANUMG2_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE
	Data sample selection.

#define	ALPHANUMG2_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

Detailed Description

Settings for registers of AlphaNum G 2 Click driver.

Macro Definition Documentation

#define ALPHANUMG2_BRIGHTNESS_MAX 0x0FFFu

#define ALPHANUMG2_BRIGHTNESS_MIN 0x0000u

AlphaNum G 2 brightness range data values.

Specified brightness range data values of AlphaNum G 2 Click driver.

#define ALPHANUMG2_BYTE_LOW 0x00FFu

#define ALPHANUMG2_DEFAULT_DUR_1000_MS 1000

AlphaNum G 2 default character duration.

Specified default character duration of AlphaNum G 2 Click driver.

#define ALPHANUMG2_NIBBLE_LOW 0x000Fu

AlphaNum G 2 data bit mask.

Specified data bit masks of AlphaNum G 2 Click driver.

#define ALPHANUMG2_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE

Data sample selection.

This macro sets data samples for SPI modules.

Note: Available only on Microchip PIC family devices. This macro will set data sampling for all SPI modules on MCU. Can be overwritten with alphanumg2_init which will set SET_SPI_DATA_SAMPLE_MIDDLE by default on the mapped mikrobus.

#define ALPHANUMG2_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

#define ALPHANUMG2_WORD_BIT_POS_0 0x0001u

#define ALPHANUMG2_WORD_BIT_POS_14 0x4000u

#define ALPHANUMG2_WORD_BIT_POS_15 0x8000u