Settings for registers of Angle 8 Click driver. More...

Macros
#define	ANGLE8_ROTATION_DIRECTION_CW 0x00
	Angle 8 Rotation Direction register setting.

#define	ANGLE8_ROTATION_DIRECTION_CCW 0x80

#define	ANGLE8_RESOLUTION 0xFFFF
	Angle 8 Angle calculation values.

#define	ANGLE8_FULL_CIRCLE 360.0

#define	ANGLE8_CYCLE_TIME_MAX 6553.5
	Angle 8 Cycle time range values.

#define	ANGLE8_CYCLE_TIME_100MS 100.0

#define	ANGLE8_CYCLE_TIME_MIN 0.2

#define	ANGLE8_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE
	Angle 8 Rotation Direction register setting.

#define	ANGLE8_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

Detailed Description

Settings for registers of Angle 8 Click driver.

Macro Definition Documentation

#define ANGLE8_CYCLE_TIME_100MS 100.0

#define ANGLE8_CYCLE_TIME_MAX 6553.5

Angle 8 Cycle time range values.

Specified Cycle time range values of Angle 8 Click driver.

#define ANGLE8_CYCLE_TIME_MIN 0.2

#define ANGLE8_FULL_CIRCLE 360.0

#define ANGLE8_RESOLUTION 0xFFFF

Angle 8 Angle calculation values.

Specified Angle calculation values of Angle 8 Click driver.

#define ANGLE8_ROTATION_DIRECTION_CCW 0x80

#define ANGLE8_ROTATION_DIRECTION_CW 0x00

Angle 8 Rotation Direction register setting.

Specified setting for Rotation Direction register of Angle 8 Click driver.

#define ANGLE8_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE

Angle 8 Rotation Direction register setting.

Specified setting for Rotation Direction register of Angle 8 Click driver.

Data sample selection.

This macro sets data samples for SPI modules.

Note: Available only on Microchip PIC family devices. This macro will set data sampling for all SPI modules on MCU. Can be overwritten with angle8_init which will set SET_SPI_DATA_SAMPLE_MIDDLE by default on the mapped mikrobus.

#define ANGLE8_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE