Settings for registers of AN to PWM 2 Click driver. More...

Macros
#define	ANTOPWM2_OTP_BIT 0x80
	AN to PWM 2 digipot register setting.

#define	ANTOPWM2_STATUS_READY 0x00

#define	ANTOPWM2_STATUS_TEST_FUSE 0x40

#define	ANTOPWM2_STATUS_FATAL_ERROR 0x80

#define	ANTOPWM2_STATUS_OTP_SUCCESS 0xC0

#define	ANTOPWM2_STATUS_MASK 0xC0

#define	ANTOPWM2_DIGIPOT_WIPER_MAX 0x3F
	AN to PWM 2 digipot setting.

#define	ANTOPWM2_DIGIPOT_R6 49900u

#define	ANTOPWM2_DIGIPOT_WIPER_RES 60

#define	ANTOPWM2_DIGIPOT_MAX_RES 50000u

#define	ANTOPWM2_FREQ_MAX 1000000ul
	AN to PWM 2 setting.

#define	ANTOPWM2_FREQ_MIN 500000ul

#define	ANTOPWM2_RSET_REF 50000u

#define	ANTOPWM2_NDIV 1

#define	ANTOPWM2_DEVICE_ADDRESS 0x2C
	AN to PWM 2 device address setting.

Detailed Description

Settings for registers of AN to PWM 2 Click driver.

Macro Definition Documentation

◆ ANTOPWM2_DEVICE_ADDRESS

#define ANTOPWM2_DEVICE_ADDRESS 0x2C

AN to PWM 2 device address setting.

Specified setting for device slave address selection of AN to PWM 2 Click driver.

◆ ANTOPWM2_DIGIPOT_MAX_RES

#define ANTOPWM2_DIGIPOT_MAX_RES 50000u

◆ ANTOPWM2_DIGIPOT_R6

#define ANTOPWM2_DIGIPOT_R6 49900u

◆ ANTOPWM2_DIGIPOT_WIPER_MAX

#define ANTOPWM2_DIGIPOT_WIPER_MAX 0x3F

AN to PWM 2 digipot setting.

Specified setting for digipot of AN to PWM 2 Click driver.

◆ ANTOPWM2_DIGIPOT_WIPER_RES

#define ANTOPWM2_DIGIPOT_WIPER_RES 60

◆ ANTOPWM2_FREQ_MAX

#define ANTOPWM2_FREQ_MAX 1000000ul

AN to PWM 2 setting.

Specified setting of AN to PWM 2 Click driver.

◆ ANTOPWM2_FREQ_MIN

#define ANTOPWM2_FREQ_MIN 500000ul

◆ ANTOPWM2_NDIV

#define ANTOPWM2_NDIV 1

◆ ANTOPWM2_OTP_BIT

#define ANTOPWM2_OTP_BIT 0x80

AN to PWM 2 digipot register setting.

Specified setting for digipot register of AN to PWM 2 Click driver.

◆ ANTOPWM2_RSET_REF

#define ANTOPWM2_RSET_REF 50000u

◆ ANTOPWM2_STATUS_FATAL_ERROR

#define ANTOPWM2_STATUS_FATAL_ERROR 0x80

◆ ANTOPWM2_STATUS_MASK

#define ANTOPWM2_STATUS_MASK 0xC0

◆ ANTOPWM2_STATUS_OTP_SUCCESS

#define ANTOPWM2_STATUS_OTP_SUCCESS 0xC0

◆ ANTOPWM2_STATUS_READY

#define ANTOPWM2_STATUS_READY 0x00

◆ ANTOPWM2_STATUS_TEST_FUSE

#define ANTOPWM2_STATUS_TEST_FUSE 0x40

Macros