anynet3gea 2.0.0.0
|
This file contains API for AnyNet 3G-EA Click Driver. More...
#include "drv_digital_out.h"
#include "drv_digital_in.h"
#include "drv_uart.h"
Go to the source code of this file.
Data Structures | |
struct | anynet3gea_t |
AnyNet 3G-EA Click context object. More... | |
struct | anynet3gea_cfg_t |
AnyNet 3G-EA Click configuration object. More... | |
Macros | |
#define | ANYNET3GEA_CMD_AT "AT" |
AnyNet 3G-EA control commands. | |
#define | ANYNET3GEA_CMD_QCCID "AT+QCCID" |
#define | ANYNET3GEA_CMD_GSN "AT+GSN" |
#define | ANYNET3GEA_CMD_AWSVER "AT+AWSVER" |
#define | ANYNET3GEA_CMD_AWSRESET "AT+AWSRESET" |
#define | ANYNET3GEA_CMD_AWSSTATE "AT+AWSSTATE" |
#define | ANYNET3GEA_CMD_AWSBUTTON "AT+AWSBUTTON" |
#define | ANYNET3GEA_CMD_AWSPUBOPEN "AT+AWSPUBOPEN" |
#define | ANYNET3GEA_CMD_AWSPUBLISH "AT+AWSPUBLISH" |
#define | ANYNET3GEA_CMD_AWSSUBOPEN "AT+AWSSUBOPEN" |
#define | ANYNET3GEA_CMD_AWSPUBCLOSE "AT+AWSPUBCLOSE" |
#define | ANYNET3GEA_RSP_OK "OK" |
AnyNet 3G-EA device response for AT commands. | |
#define | ANYNET3GEA_RSP_ERROR "ERROR" |
#define | ANYNET3GEA_RSP_READY_FOR_SEND ">" |
#define | ANYNET3GEA_RSP_SEND_OK "SEND OK" |
#define | ANYNET3GEA_RSP_SEND_FAIL "SEND FAIL" |
#define | ANYNET3GEA_RX_DRV_BUFFER_SIZE 256 |
AnyNet 3G-EA driver buffer size. | |
#define | ANYNET3GEA_TX_DRV_BUFFER_SIZE 256 |
#define | ANYNET3GEA_MAP_MIKROBUS(cfg, mikrobus) |
MikroBUS pin mapping. | |
Enumerations | |
enum | anynet3gea_return_value_t { ANYNET3GEA_OK = 0 , ANYNET3GEA_ERROR = -1 , ANYNET3GEA_ERROR_TIMEOUT = -2 , ANYNET3GEA_ERROR_CMD = -3 , ANYNET3GEA_ERROR_SEND = -4 , ANYNET3GEA_ERROR_UNKNOWN = -5 } |
AnyNet 3G-EA Click return value data. More... | |
Functions | |
void | anynet3gea_cfg_setup (anynet3gea_cfg_t *cfg) |
AnyNet 3G-EA configuration object setup function. | |
err_t | anynet3gea_init (anynet3gea_t *ctx, anynet3gea_cfg_t *cfg) |
AnyNet 3G-EA initialization function. | |
err_t | anynet3gea_generic_write (anynet3gea_t *ctx, uint8_t *data_in, uint16_t len) |
AnyNet 3G-EA data writing function. | |
err_t | anynet3gea_generic_read (anynet3gea_t *ctx, uint8_t *data_out, uint16_t len) |
AnyNet 3G-EA data reading function. | |
void | anynet3gea_set_slp_pin (anynet3gea_t *ctx, uint8_t state) |
AnyNet 3G-EA set slp pin function. | |
void | anynet3gea_set_dtr_pin (anynet3gea_t *ctx, uint8_t state) |
AnyNet 3G-EA set dtr pin function. | |
void | anynet3gea_set_iot_pin (anynet3gea_t *ctx, uint8_t state) |
AnyNet 3G-EA set iot pin function. | |
uint8_t | anynet3gea_get_dsr_pin (anynet3gea_t *ctx) |
AnyNet 3G-EA get dsr pin function. | |
void | anynet3gea_send_cmd (anynet3gea_t *ctx, uint8_t *cmd) |
Send command function. | |
void | anynet3gea_send_cmd_with_par (anynet3gea_t *ctx, uint8_t *at_cmd_buf, uint8_t *param_buf) |
Send command function with parameter. | |
void | anynet3gea_send_cmd_check (anynet3gea_t *ctx, uint8_t *at_cmd_buf) |
Check the sent command. | |
void | anynet3gea_send_cmd_par_check (anynet3gea_t *ctx, uint8_t *at_cmd_buf) |
Check the command parameters. | |
This file contains API for AnyNet 3G-EA Click Driver.