bluetooth.h File Reference

This file contains API for Bluetooth Click driver. More...

#include "drv_digital_out.h"
#include "drv_digital_in.h"
#include "drv_uart.h"

Go to the source code of this file.

Data Structures
struct	bluetooth_t
	Click ctx object definition. More...
struct	bluetooth_cfg_t
	Click configuration structure definition. More...

Macros
#define	BLUETOOTH_MAP_MIKROBUS(cfg, mikrobus)
#define	BLUETOOTH_RETVAL   uint8_t
#define	BLUETOOTH_INIT_OK   0x00
#define	BLUETOOTH_INIT_ERROR   0xFF
#define	BLUETOOTH_CMD   0x01
#define	BLUETOOTH_AOK   0x02
#define	BLUETOOTH_CONN   0x03
#define	BLUETOOTH_DONE   0x04
#define	BLUETOOTH_ERR   0x00
#define	BLUETOOTH_OK   0x01
#define	DRV_RX_BUFFER_SIZE   500

Typedefs
typedef uint8_t	bluetooth_error_t
	Error type.

Functions
void	bluetooth_cfg_setup (bluetooth_cfg_t *cfg)
	Config Object Initialization function.
BLUETOOTH_RETVAL	bluetooth_init (bluetooth_t *ctx, bluetooth_cfg_t *cfg)
	Initialization function.
void	bluetooth_generic_write (bluetooth_t *ctx, char *data_buf, uint16_t len)
	Generic write function.
int32_t	bluetooth_generic_read (bluetooth_t *ctx, char *data_buf, uint16_t max_len)
	Generic read function.
void	bluetooth_write_command (bluetooth_t *ctx, char *data_buf, uint16_t len)
	Write command function.
void	bluetooth_enable (bluetooth_t *ctx)
	Enable device function.
void	bluetooth_hw_reset (bluetooth_t *ctx)
	Hardwere reset function.
void	bluetooth_enter_command_mode (bluetooth_t *ctx)
	Enter the command mode function.
void	bluetooth_exit_command_mode (bluetooth_t *ctx)
	Exit the command mode function.
void	bluetooth_toggle_echo (bluetooth_t *ctx)
	Toggles echo function.
void	bluetooth_set_device_name (bluetooth_t *ctx, uint8_t *name)
	Set the device name function.
void	bluetooth_set_operating_mode (bluetooth_t *ctx, uint8_t op_mode)
	Set the operating mode function.
void	bluetooth_enable_7_bit_data_mode (bluetooth_t *ctx)
	Enable 7-Bit data mode function.
void	bluetooth_disable_7_bit_data_mode (bluetooth_t *ctx)
	Disable 7-Bit data mode function.
void	bluetooth_set_authentication (bluetooth_t *ctx, uint8_t auth_value)
	Set the authentication function.
void	bluetooth_set_break (bluetooth_t *ctx, uint8_t break_signal)
	Set the break function.
BLUETOOTH_RETVAL	bluetooth_set_cod (bluetooth_t *ctx, uint8_t *msw, uint8_t *lsw)
	Sets the class of device (COD) function.
void	bluetooth_set_factory_defaults (bluetooth_t *ctx)
	Set factory defaults settings function.
void	bluetooth_set_discoverability (bluetooth_t *ctx, uint8_t *d_hex_value)
	Set enable an inquiry scan function.
void	bluetooth_setConnectability (bluetooth_t *ctx, uint8_t *c_hex_value)
	Set enable page scanning function.
BLUETOOTH_RETVAL	bluetooth_set_uart_parity (bluetooth_t *ctx, uint8_t character)
	Set UART parity function.
void	bluetooth_set_extended_status_string (bluetooth_t *ctx, uint8_t *es_string)
	Set extended status string function.
BLUETOOTH_RETVAL	bluetooth_set_security_pin_code (bluetooth_t *ctx, uint8_t *sp_code)
	Set security pin code function.
BLUETOOTH_RETVAL	bluetooth_set_special_config (bluetooth_t *ctx, uint16_t special_config)
	Set special configuration settings function.
void	bluetooth_set_remote_address (bluetooth_t *ctx, uint8_t *r_addr)
	Set the remote Bluetooth address function.
BLUETOOTH_RETVAL	bluetooth_set_baud_rate (bluetooth_t *ctx, uint32_t baud_rate)
	Set the baud rate function.
void	bluetooth_enable_bonding (bluetooth_t *ctx)
	Set bonding enable function.
void	bluetooth_disable_bonding (bluetooth_t *ctx)
	Set bonding disable function.
void	bluetooth_reboot (bluetooth_t *ctx)
	Reboot the module function.
BLUETOOTH_RETVAL	bluetooth_set_profile (bluetooth_t *ctx, uint8_t profile)
	Set the profile function.
void	bluetooth_enable_role_switch (bluetooth_t *ctx)
	Enables the role switch function.
void	bluetooth_disable_role_switch (bluetooth_t *ctx)
	Disables the role switch function.
void	bluetooth_connect_to_remote_address (bluetooth_t *ctx, uint8_t *r_addr)
	Connect the device to a remote address function.
void	bluetooth_connect_to_remote_address_fast_mode (bluetooth_t *ctx, uint8_t *r_addr)
	Connect the device to a remote address fast mode function.
void	bluetooth_endspecial_config (bluetooth_t *ctx)
	Ends configuration and puts the device into fast data mode function.
void	bluetooth_get_help (bluetooth_t *ctx)
	Get displays a list of help command function.
void	bluetooth_get_basic_settings (bluetooth_t *ctx)
	Get displays basic settings function.
void	bluetooth_get_extended_settings (bluetooth_t *ctx)
	Get displays the device�s extended settings function.
void	bluetooth_get_device_address (bluetooth_t *ctx)
	Get displays the device�s eBluetooth address function.
void	bluetooth_scans_device (bluetooth_t *ctx)
	Scans for Bluetooth devices in pairing mode function.
void	bluetooth_get_signal_status (bluetooth_t *ctx)
	Displays the remote side modem signal status function.
void	bluetooth_set_undiscoverable (bluetooth_t *ctx)
	Set undiscoverable mode function.
BLUETOOTH_RETVAL	bluetooth_set_quiet_mode (bluetooth_t *ctx, uint8_t q_mode)
	Set quiet mode function.
void	bluetooth_get_firmware_version (bluetooth_t *ctx)
	Get firmware version function.

Detailed Description

This file contains API for Bluetooth Click driver.