Settings for registers of 3D Hall 9 Click driver. More...

Macros
#define	C3DHALL9_EEPROM_02_ENABLE_Z 0x00000100ul
	3D Hall 9 register setting.

#define	C3DHALL9_EEPROM_02_ENABLE_Y 0x00000080ul

#define	C3DHALL9_EEPROM_02_ENABLE_X 0x00000040ul

#define	C3DHALL9_VOLATILE_27_ACTIVE_MODE 0x00000000ul

#define	C3DHALL9_VOLATILE_27_SLEEP_MODE 0x00000001ul

#define	C3DHALL9_VOLATILE_27_LOW_POWER_MODE 0x00000002ul

#define	C3DHALL9_VOLATILE_27_I2C_SINGLE 0x00000000ul

#define	C3DHALL9_VOLATILE_27_I2C_FAST_LOOP 0x00000004ul

#define	C3DHALL9_VOLATILE_27_I2C_FULL_LOOP 0x00000008ul

#define	C3DHALL9_12BIT_RESOLUTION 0x1000
	3D Hall 9 measurements values.

#define	C3DHALL9_SIGN_BIT 0x0800

#define	C3DHALL9_DATA_READY_BIT 0x0080

#define	C3DHALL9_GAUSS_RESOLUTION 4

#define	C3DHALL9_TEMPERATURE_MULTIPLIER 302

#define	C3DHALL9_TEMPERATURE_SUBTRACTOR 1702

#define	C3DHALL9_TEMPERATURE_SUBTRACTOR 1702

#define	C3DHALL9_HALF_CICRLE_DEGREES 180.0

#define	C3DHALL9_MATH_TWO_PI 6.28318530717958

#define	C3DHALL9_SET_DEV_ADDR 0x60
	3D Hall 9 device address setting.

Detailed Description

Settings for registers of 3D Hall 9 Click driver.

Macro Definition Documentation

◆ C3DHALL9_12BIT_RESOLUTION

#define C3DHALL9_12BIT_RESOLUTION 0x1000

3D Hall 9 measurements values.

Specified values for measurements of 3D Hall 9 Click driver.

◆ C3DHALL9_DATA_READY_BIT

#define C3DHALL9_DATA_READY_BIT 0x0080

◆ C3DHALL9_EEPROM_02_ENABLE_X

#define C3DHALL9_EEPROM_02_ENABLE_X 0x00000040ul

◆ C3DHALL9_EEPROM_02_ENABLE_Y

#define C3DHALL9_EEPROM_02_ENABLE_Y 0x00000080ul

◆ C3DHALL9_EEPROM_02_ENABLE_Z

#define C3DHALL9_EEPROM_02_ENABLE_Z 0x00000100ul

3D Hall 9 register setting.

Specified setting for registers of 3D Hall 9 Click driver.

◆ C3DHALL9_GAUSS_RESOLUTION

#define C3DHALL9_GAUSS_RESOLUTION 4

◆ C3DHALL9_HALF_CICRLE_DEGREES

#define C3DHALL9_HALF_CICRLE_DEGREES 180.0

◆ C3DHALL9_MATH_TWO_PI

#define C3DHALL9_MATH_TWO_PI 6.28318530717958

◆ C3DHALL9_SET_DEV_ADDR

#define C3DHALL9_SET_DEV_ADDR 0x60

3D Hall 9 device address setting.

Specified setting for device slave address selection of 3D Hall 9 Click driver.

◆ C3DHALL9_SIGN_BIT

#define C3DHALL9_SIGN_BIT 0x0800

◆ C3DHALL9_TEMPERATURE_MULTIPLIER

#define C3DHALL9_TEMPERATURE_MULTIPLIER 302

◆ C3DHALL9_TEMPERATURE_SUBTRACTOR [1/2]

#define C3DHALL9_TEMPERATURE_SUBTRACTOR 1702

◆ C3DHALL9_TEMPERATURE_SUBTRACTOR [2/2]

#define C3DHALL9_TEMPERATURE_SUBTRACTOR 1702

◆ C3DHALL9_VOLATILE_27_ACTIVE_MODE

#define C3DHALL9_VOLATILE_27_ACTIVE_MODE 0x00000000ul

◆ C3DHALL9_VOLATILE_27_I2C_FAST_LOOP

#define C3DHALL9_VOLATILE_27_I2C_FAST_LOOP 0x00000004ul

◆ C3DHALL9_VOLATILE_27_I2C_FULL_LOOP

#define C3DHALL9_VOLATILE_27_I2C_FULL_LOOP 0x00000008ul

◆ C3DHALL9_VOLATILE_27_I2C_SINGLE

#define C3DHALL9_VOLATILE_27_I2C_SINGLE 0x00000000ul

◆ C3DHALL9_VOLATILE_27_LOW_POWER_MODE

#define C3DHALL9_VOLATILE_27_LOW_POWER_MODE 0x00000002ul

◆ C3DHALL9_VOLATILE_27_SLEEP_MODE

#define C3DHALL9_VOLATILE_27_SLEEP_MODE 0x00000001ul

Macros