4G LTE-ATT Click Example. More...

#include "board.h"
#include "log.h"
#include "c4glteatt.h"
#include "string.h"

Macros
#define	APP_OK 0

#define	APP_ERROR_DRIVER -1

#define	APP_ERROR_OVERFLOW -2

#define	APP_ERROR_TIMEOUT -3

#define	RSP_OK "OK"

#define	RSP_ERROR "ERROR"

#define	SIM_APN ""

#define	SIM_SMSC ""

#define	PHONE_NUMBER_TO_MESSAGE ""

#define	MESSAGE_CONTENT "4G LTE-ATT click board - demo example."

#define	PROCESS_BUFFER_SIZE 256

#define	WAIT_FOR_CONNECTION 0

#define	CONNECTED_TO_NETWORK 1

#define	CONNECTED "+CREG: 1,1"

Functions
void	application_init (void)

void	application_task (void)

int	main (void)

Detailed Description

4G LTE-ATT Click Example.

Description

This example reads and processes data from 4G LTE-ATT click.

The demo application is composed of two sections :

Application Init

Initializes the driver and powers up the module, then sets default configuration for connecting the device to network.

Application Task

Waits for device to connect to network and then sends a desired SMS to the selected phone number approximately every 30 seconds.

Additional Function

static void c4glteatt_clear_app_buf ( void )
static void c4glteatt_error_check( err_t error_flag )
static void c4glteatt_log_app_buf ( void )
static void c4glteatt_check_connection( void )
static err_t c4glteatt_rsp_check ( void )
static err_t c4glteatt_process ( void )

Note: In order for the example to work, user needs to set the phone number to which he wants to send an SMS, and also will need to set an APN and SMSC (required for PDU mode only) of entered SIM card. Enter valid data for the following macros: SIM_APN, SIM_SMSC and PHONE_NUMBER_TO_MESSAGE. E.g. SIM_APN "vipmobile" SIM_SMSC "+381610401" PHONE_NUMBER_TO_MESSAGE "+381659999999"

Author: Stefan Ilic

Macro Definition Documentation

◆ APP_ERROR_DRIVER

#define APP_ERROR_DRIVER -1

◆ APP_ERROR_OVERFLOW

#define APP_ERROR_OVERFLOW -2

◆ APP_ERROR_TIMEOUT

#define APP_ERROR_TIMEOUT -3

◆ APP_OK

#define APP_OK 0

◆ CONNECTED

#define CONNECTED "+CREG: 1,1"

◆ CONNECTED_TO_NETWORK

#define CONNECTED_TO_NETWORK 1

◆ MESSAGE_CONTENT

#define MESSAGE_CONTENT "4G LTE-ATT click board - demo example."

◆ PHONE_NUMBER_TO_MESSAGE

#define PHONE_NUMBER_TO_MESSAGE ""

◆ PROCESS_BUFFER_SIZE

#define PROCESS_BUFFER_SIZE 256

◆ RSP_ERROR

#define RSP_ERROR "ERROR"

◆ RSP_OK

#define RSP_OK "OK"

◆ SIM_APN

#define SIM_APN ""

◆ SIM_SMSC

#define SIM_SMSC ""

◆ WAIT_FOR_CONNECTION

#define WAIT_FOR_CONNECTION 0

Function Documentation

◆ application_init()

void application_init ( void )

< Logger config object.

< Click config object.

Logger initialization. Default baud rate: 115200 Default log level: LOG_LEVEL_DEBUG

Note: If USB_UART_RX and USB_UART_TX are defined as HAL_PIN_NC, you will need to define them manually for log to work. See LOG_MAP_USB_UART macro definition for detailed explanation.

◆ application_task()

void application_task ( void )

◆ main()

int main ( void )

Macros

Functions