Settings for registers of DAC 9 Click driver. More...

Macros
#define	DAC9_SYNC_DISABLE 0x0000
	DAC 9 description setting.

#define	DAC9_SYNC_ENABLE 0x0001

#define	DAC9_CONFIG_REF_PWDWN_ENABLE 0x0000

#define	DAC9_CONFIG_REF_PWDWN_DISABLE 0x0100

#define	DAC9_CONFIG_REF_PWDWN_BIT_MASK 0x0100

#define	DAC9_CONFIG_DAC_PWDWN_DISABLE 0x0000

#define	DAC9_CONFIG_DAC_PWDWN_ENABLE 0x0001

#define	DAC9_CONFIG_DAC_PWDWN_BIT_MASK 0x0001

#define	DAC9_GAIN_REF_DIV_DISABLE 0x0000

#define	DAC9_GAIN_REF_DIV_2 0x0100

#define	DAC9_GAIN_REF_DIV_BIT_MASK 0x0100

#define	DAC9_GAIN_BUFF_GAIN_1 0x0000

#define	DAC9_GAIN_BUFF_GAIN_2 0x0001

#define	DAC9_GAIN_BUFF_GAIN_BIT_MASK 0x0001

#define	DAC9_TRIGGER_LDAC 0x0010

#define	DAC9_TRIGGER_SOFT_RESET 0x000A

#define	DAC9_STATUS_REF_ALARM_BIT_MASK 0x0001

#define	DAC9_I2C_ADR_AGND 0x48
	DAC 9 device address setting.

#define	DAC9_I2C_ADR_VDD 0x49

#define	DAC9_I2C_ADR_SDA 0x4A

#define	DAC9_I2C_ADR_SCL 0x4B

#define	DAC9_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE
	Data sample selection.

#define	DAC9_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

Detailed Description

Settings for registers of DAC 9 Click driver.

Macro Definition Documentation

◆ DAC9_CONFIG_DAC_PWDWN_BIT_MASK

#define DAC9_CONFIG_DAC_PWDWN_BIT_MASK 0x0001

◆ DAC9_CONFIG_DAC_PWDWN_DISABLE

#define DAC9_CONFIG_DAC_PWDWN_DISABLE 0x0000

◆ DAC9_CONFIG_DAC_PWDWN_ENABLE

#define DAC9_CONFIG_DAC_PWDWN_ENABLE 0x0001

◆ DAC9_CONFIG_REF_PWDWN_BIT_MASK

#define DAC9_CONFIG_REF_PWDWN_BIT_MASK 0x0100

◆ DAC9_CONFIG_REF_PWDWN_DISABLE

#define DAC9_CONFIG_REF_PWDWN_DISABLE 0x0100

◆ DAC9_CONFIG_REF_PWDWN_ENABLE

#define DAC9_CONFIG_REF_PWDWN_ENABLE 0x0000

◆ DAC9_GAIN_BUFF_GAIN_1

#define DAC9_GAIN_BUFF_GAIN_1 0x0000

◆ DAC9_GAIN_BUFF_GAIN_2

#define DAC9_GAIN_BUFF_GAIN_2 0x0001

◆ DAC9_GAIN_BUFF_GAIN_BIT_MASK

#define DAC9_GAIN_BUFF_GAIN_BIT_MASK 0x0001

◆ DAC9_GAIN_REF_DIV_2

#define DAC9_GAIN_REF_DIV_2 0x0100

◆ DAC9_GAIN_REF_DIV_BIT_MASK

#define DAC9_GAIN_REF_DIV_BIT_MASK 0x0100

◆ DAC9_GAIN_REF_DIV_DISABLE

#define DAC9_GAIN_REF_DIV_DISABLE 0x0000

◆ DAC9_I2C_ADR_AGND

#define DAC9_I2C_ADR_AGND 0x48

DAC 9 device address setting.

Specified setting for device slave address selection of DAC 9 Click driver.

◆ DAC9_I2C_ADR_SCL

#define DAC9_I2C_ADR_SCL 0x4B

◆ DAC9_I2C_ADR_SDA

#define DAC9_I2C_ADR_SDA 0x4A

◆ DAC9_I2C_ADR_VDD

#define DAC9_I2C_ADR_VDD 0x49

◆ DAC9_SET_DATA_SAMPLE_EDGE

#define DAC9_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE

Data sample selection.

This macro sets data samples for SPI modules.

Note: Available only on Microchip PIC family devices. This macro will set data sampling for all SPI modules on MCU. Can be overwritten with dac9_init which will set SET_SPI_DATA_SAMPLE_MIDDLE by default on the mapped mikrobus.

◆ DAC9_SET_DATA_SAMPLE_MIDDLE

#define DAC9_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

◆ DAC9_STATUS_REF_ALARM_BIT_MASK

#define DAC9_STATUS_REF_ALARM_BIT_MASK 0x0001

◆ DAC9_SYNC_DISABLE

#define DAC9_SYNC_DISABLE 0x0000

DAC 9 description setting.

Specified setting for description of DAC 9 Click driver.

◆ DAC9_SYNC_ENABLE

#define DAC9_SYNC_ENABLE 0x0001

◆ DAC9_TRIGGER_LDAC

#define DAC9_TRIGGER_LDAC 0x0010

◆ DAC9_TRIGGER_SOFT_RESET

#define DAC9_TRIGGER_SOFT_RESET 0x000A

Macros