dcmotor3.h

Go to the documentation of this file.

/*
 * MikroSDK - MikroE Software Development Kit
 * Copyright© 2020 MikroElektronika d.o.o.
 * 
 * Permission is hereby granted, free of charge, to any person 
 * obtaining a copy of this software and associated documentation 
 * files (the "Software"), to deal in the Software without restriction, 
 * including without limitation the rights to use, copy, modify, merge, 
 * publish, distribute, sublicense, and/or sell copies of the Software, 
 * and to permit persons to whom the Software is furnished to do so, 
 * subject to the following conditions:
 * 
 * The above copyright notice and this permission notice shall be 
 * included in all copies or substantial portions of the Software.
 * 
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 
 * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE 
 * OR OTHER DEALINGS IN THE SOFTWARE. 
 */
 
// ----------------------------------------------------------------------------
 
#ifndef DCMOTOR3_H
#define DCMOTOR3_H
 
#ifdef PREINIT_SUPPORTED
#include "preinit.h"
#endif
 
#ifdef MikroCCoreVersion
    #if MikroCCoreVersion >= 1
        #include "delays.h"
    #endif
#endif
 
#include "drv_digital_out.h"
#include "drv_digital_in.h"
#include "drv_pwm.h"
 
// -------------------------------------------------------------- PUBLIC MACROS 
#define DCMOTOR3_MAP_MIKROBUS( cfg, mikrobus ) \
  cfg.pwm = MIKROBUS( mikrobus, MIKROBUS_PWM ); \
  cfg.in1 = MIKROBUS( mikrobus, MIKROBUS_AN ); \
  cfg.in2 = MIKROBUS( mikrobus, MIKROBUS_RST ); \
  cfg.slp = MIKROBUS( mikrobus, MIKROBUS_CS ) 
#define DCMOTOR3_RETVAL  uint8_t
 
#define DCMOTOR3_OK           0x00
#define DCMOTOR3_INIT_ERROR   0xFF
#define DCMOTOR3_DEF_FREQ     15000
 // End group macro 
// --------------------------------------------------------------- PUBLIC TYPES
typedef struct
{
    
    // Output pins 
 
    digital_out_t in1;
    digital_out_t in2;
    digital_out_t slp;
 
    // Modules 
 
    pwm_t pwm;
 
    // ctx variable 
 
    uint16_t pwm_period;
    uint32_t  pwm_freq;
 
} dcmotor3_t;
 
typedef struct
{
    // Communication gpio pins 
 
    pin_name_t pwm;
    
    // Additional gpio pins 
 
    pin_name_t in1;
    pin_name_t in2;
    pin_name_t slp;
 
    // static variable 
 
    uint32_t  dev_pwm_freq;
 
} dcmotor3_cfg_t;
 
 // End types group
// ----------------------------------------------- PUBLIC FUNCTION DECLARATIONS
 
#ifdef __cplusplus
extern "C"{
#endif
 
void dcmotor3_cfg_setup ( dcmotor3_cfg_t *cfg );
 
DCMOTOR3_RETVAL dcmotor3_init ( dcmotor3_t *ctx, dcmotor3_cfg_t *cfg );
 
void dcmotor3_set_duty_cycle ( dcmotor3_t *ctx, float duty_cycle );
 
void dcmotor3_pwm_stop ( dcmotor3_t *ctx );
 
void dcmotor3_pwm_start ( dcmotor3_t *ctx );
 
void dcmotor3_enable ( dcmotor3_t *ctx );
 
void dcmotor3_standby ( dcmotor3_t *ctx );
 
void dcmotor3_counter_clockwise ( dcmotor3_t *ctx );
 
void dcmotor3_clockwise ( dcmotor3_t *ctx );
 
void dcmotor3_short_brake ( dcmotor3_t *ctx );
 
void dcmotor3_stop ( dcmotor3_t *ctx );
 
 
#ifdef __cplusplus
}
#endif
#endif  // _DCMOTOR3_H_
 
 // End public_function group
 
// ------------------------------------------------------------------------- END