Settings for registers of DIGI POT 12 Click driver. More...

Macros
#define	DIGIPOT12_CTRL_REG_WIPER_POS_FROZEN 0x00
	DIGI POT 12 control register bit descriptions.

#define	DIGIPOT12_CTRL_REG_UPDATE_WIPER_POS 0x01

#define	DIGIPOT12_CTRL_REG_EEPROM_PROGRAM_DISABLE 0x00

#define	DIGIPOT12_CTRL_REG_EEPROM_PROGRAM_ENABLE 0x02

#define	DIGIPOT12_CTRL_REG_MODE_POTENTIOMETER 0x00

#define	DIGIPOT12_CTRL_REG_MODE_LINEAR_GAIN 0x04

#define	DIGIPOT12_CTRL_REG_MODE_BURST_DISABLE 0x00

#define	DIGIPOT12_CTRL_REG_MODE_BURST_ENABLE 0x08

#define	DIGIPOT12_WIPER_POS_MAX 255
	DIGI POT 12 wiper and resistance data values.

#define	DIGIPOT12_WIPER_POS_MIN 0

#define	DIGIPOT12_WIPER_POS_MIDDLE 127

#define	DIGIPOT12_RES_10_KOHM 10

#define	DIGIPOT12_RES_0_KOHM 0

#define	DIGIPOT12_DEVICE_ADDRESS_0 0x2F
	DIGI POT 12 device address setting.

#define	DIGIPOT12_DEVICE_ADDRESS_1 0x2C

#define	DIGIPOT12_DEVICE_ADDRESS_2 0x23

#define	DIGIPOT12_DEVICE_ADDRESS_3 0x20

Detailed Description

Settings for registers of DIGI POT 12 Click driver.

Macro Definition Documentation

◆ DIGIPOT12_CTRL_REG_EEPROM_PROGRAM_DISABLE

#define DIGIPOT12_CTRL_REG_EEPROM_PROGRAM_DISABLE 0x00

◆ DIGIPOT12_CTRL_REG_EEPROM_PROGRAM_ENABLE

#define DIGIPOT12_CTRL_REG_EEPROM_PROGRAM_ENABLE 0x02

◆ DIGIPOT12_CTRL_REG_MODE_BURST_DISABLE

#define DIGIPOT12_CTRL_REG_MODE_BURST_DISABLE 0x00

◆ DIGIPOT12_CTRL_REG_MODE_BURST_ENABLE

#define DIGIPOT12_CTRL_REG_MODE_BURST_ENABLE 0x08

◆ DIGIPOT12_CTRL_REG_MODE_LINEAR_GAIN

#define DIGIPOT12_CTRL_REG_MODE_LINEAR_GAIN 0x04

◆ DIGIPOT12_CTRL_REG_MODE_POTENTIOMETER

#define DIGIPOT12_CTRL_REG_MODE_POTENTIOMETER 0x00

◆ DIGIPOT12_CTRL_REG_UPDATE_WIPER_POS

#define DIGIPOT12_CTRL_REG_UPDATE_WIPER_POS 0x01

◆ DIGIPOT12_CTRL_REG_WIPER_POS_FROZEN

#define DIGIPOT12_CTRL_REG_WIPER_POS_FROZEN 0x00

DIGI POT 12 control register bit descriptions.

Specified control register bit descriptions of DIGI POT 12 Click driver.

◆ DIGIPOT12_DEVICE_ADDRESS_0

#define DIGIPOT12_DEVICE_ADDRESS_0 0x2F

DIGI POT 12 device address setting.

Specified setting for device slave address selection of DIGI POT 12 Click driver.

◆ DIGIPOT12_DEVICE_ADDRESS_1

#define DIGIPOT12_DEVICE_ADDRESS_1 0x2C

◆ DIGIPOT12_DEVICE_ADDRESS_2

#define DIGIPOT12_DEVICE_ADDRESS_2 0x23

◆ DIGIPOT12_DEVICE_ADDRESS_3

#define DIGIPOT12_DEVICE_ADDRESS_3 0x20

◆ DIGIPOT12_RES_0_KOHM

#define DIGIPOT12_RES_0_KOHM 0

◆ DIGIPOT12_RES_10_KOHM

#define DIGIPOT12_RES_10_KOHM 10

◆ DIGIPOT12_WIPER_POS_MAX

#define DIGIPOT12_WIPER_POS_MAX 255

DIGI POT 12 wiper and resistance data values.

Specified wiper and resistance data values of DIGI POT 12 Click driver.

◆ DIGIPOT12_WIPER_POS_MIDDLE

#define DIGIPOT12_WIPER_POS_MIDDLE 127

◆ DIGIPOT12_WIPER_POS_MIN

#define DIGIPOT12_WIPER_POS_MIN 0

Macros