Settings for registers of DIGI POT 7 Click driver. More...

Macros
#define	DIGIPOT7_COMMAND_NOP 0x00
	DIGI POT 7 description setting.

#define	DIGIPOT7_COMMAND_WRITE_RDAC 0x04

#define	DIGIPOT7_COMMAND_READ_RDAC 0x08

#define	DIGIPOT7_COMMAND_STORE_WIPER 0x0C

#define	DIGIPOT7_COMMAND_SW_RESET 0x10

#define	DIGIPOT7_COMMAND_READ_50TP 0x14

#define	DIGIPOT7_COMMAND_READ_MEMORY 0x18

#define	DIGIPOT7_COMMAND_WRITE_MEMORY 0x1C

#define	DIGIPOT7_COMMAND_READ_CONTROL 0x20

#define	DIGIPOT7_COMMAND_SW_SHUTDOWN 0x24

#define	DIGIPOT7_SHUTDOWN_BIT_MASK 0x01
	DIGI POT 7 device software shutdown setting.

#define	DIGIPOT7_NORMAL_MODE 0x00

#define	DIGIPOT7_SHUTDOWN_MODE 0x01

#define	DIGIPOT7_CTRL_REG_BIT_MASK 0x0B
	DIGI POT 7 device bit map setting.

#define	DIGIPOT7_FUSE_PROGRAM_SUCCESSFUL 0x00

#define	DIGIPOT7_FUSE_PROGRAM_UNSUCCESSFUL 0x08

#define	DIGIPOT7_WIPER_POS_FROZEN 0x00

#define	DIGIPOT7_UPDATE_WIPER_POS 0x02

#define	DIGIPOT7_50T_PROGRAM_DISABLED 0x00

#define	DIGIPOT7_50T_PROGRAM_ENABLE 0x01

#define	DIGIPOT7_10_BIT 0x03FF
	DIGI POT 7 device state setting.

#define	DIGIPOT7_DUMMY 0x0000

#define	DIGIPOT7_I2C_SLAVE_ADDRESS_GND 0x2F
	DIGI POT 7 device address setting.

#define	DIGIPOT7_I2C_SLAVE_ADDRESS_VCC 0x2C

#define	DIGIPOT7_I2C_SLAVE_ADDRESS_NC 0x2E

Detailed Description

Settings for registers of DIGI POT 7 Click driver.

Macro Definition Documentation

◆ DIGIPOT7_10_BIT

#define DIGIPOT7_10_BIT 0x03FF

DIGI POT 7 device state setting.

Specified setting for state of DIGI POT 7 Click driver.

◆ DIGIPOT7_50T_PROGRAM_DISABLED

#define DIGIPOT7_50T_PROGRAM_DISABLED 0x00

◆ DIGIPOT7_50T_PROGRAM_ENABLE

#define DIGIPOT7_50T_PROGRAM_ENABLE 0x01

◆ DIGIPOT7_COMMAND_NOP

#define DIGIPOT7_COMMAND_NOP 0x00

DIGI POT 7 description setting.

Specified setting for description of DIGI POT 7 Click driver.

DIGI POT 7 device commands.

Specified commands of DIGI POT 7 Click driver.

◆ DIGIPOT7_COMMAND_READ_50TP

#define DIGIPOT7_COMMAND_READ_50TP 0x14

◆ DIGIPOT7_COMMAND_READ_CONTROL

#define DIGIPOT7_COMMAND_READ_CONTROL 0x20

◆ DIGIPOT7_COMMAND_READ_MEMORY

#define DIGIPOT7_COMMAND_READ_MEMORY 0x18

◆ DIGIPOT7_COMMAND_READ_RDAC

#define DIGIPOT7_COMMAND_READ_RDAC 0x08

◆ DIGIPOT7_COMMAND_STORE_WIPER

#define DIGIPOT7_COMMAND_STORE_WIPER 0x0C

◆ DIGIPOT7_COMMAND_SW_RESET

#define DIGIPOT7_COMMAND_SW_RESET 0x10

◆ DIGIPOT7_COMMAND_SW_SHUTDOWN

#define DIGIPOT7_COMMAND_SW_SHUTDOWN 0x24

◆ DIGIPOT7_COMMAND_WRITE_MEMORY

#define DIGIPOT7_COMMAND_WRITE_MEMORY 0x1C

◆ DIGIPOT7_COMMAND_WRITE_RDAC

#define DIGIPOT7_COMMAND_WRITE_RDAC 0x04

◆ DIGIPOT7_CTRL_REG_BIT_MASK

#define DIGIPOT7_CTRL_REG_BIT_MASK 0x0B

DIGI POT 7 device bit map setting.

Specified setting for bit map of DIGI POT 7 Click driver.

◆ DIGIPOT7_DUMMY

#define DIGIPOT7_DUMMY 0x0000

◆ DIGIPOT7_FUSE_PROGRAM_SUCCESSFUL

#define DIGIPOT7_FUSE_PROGRAM_SUCCESSFUL 0x00

◆ DIGIPOT7_FUSE_PROGRAM_UNSUCCESSFUL

#define DIGIPOT7_FUSE_PROGRAM_UNSUCCESSFUL 0x08

◆ DIGIPOT7_I2C_SLAVE_ADDRESS_GND

#define DIGIPOT7_I2C_SLAVE_ADDRESS_GND 0x2F

DIGI POT 7 device address setting.

Specified setting for device slave address selection of DIGI POT 7 Click driver.

◆ DIGIPOT7_I2C_SLAVE_ADDRESS_NC

#define DIGIPOT7_I2C_SLAVE_ADDRESS_NC 0x2E

◆ DIGIPOT7_I2C_SLAVE_ADDRESS_VCC

#define DIGIPOT7_I2C_SLAVE_ADDRESS_VCC 0x2C

◆ DIGIPOT7_NORMAL_MODE

#define DIGIPOT7_NORMAL_MODE 0x00

◆ DIGIPOT7_SHUTDOWN_BIT_MASK

#define DIGIPOT7_SHUTDOWN_BIT_MASK 0x01

DIGI POT 7 device software shutdown setting.

Specified setting for software shutdown of DIGI POT 7 Click driver.

◆ DIGIPOT7_SHUTDOWN_MODE

#define DIGIPOT7_SHUTDOWN_MODE 0x01

◆ DIGIPOT7_UPDATE_WIPER_POS

#define DIGIPOT7_UPDATE_WIPER_POS 0x02

◆ DIGIPOT7_WIPER_POS_FROZEN

#define DIGIPOT7_WIPER_POS_FROZEN 0x00

Macros