Settings for registers of EERAM 3 Click driver. More...

Macros
#define	EERAM3_RDY_BIT_MASK 0x01
	EERAM 3 status register bits mask.

#define	EERAM3_WEL_BIT_MASK 0x02

#define	EERAM3_BLOCK_PROTECT_BITS_MASK 0x0C

#define	EERAM3_BLOCK_PROTECT_NONE 0x00

#define	EERAM3_BLOCK_PROTECT_UPPER_QUARTER 0x04

#define	EERAM3_BLOCK_PROTECT_UPPER_HALF 0x08

#define	EERAM3_BLOCK_PROTECT_ALL 0x0C

#define	EERAM3_SWM_BIT_MASK 0x10

#define	EERAM3_PRO_BIT_MASK 0x20

#define	EERAM3_ASE_BIT_MASK 0x40

#define	EERAM3_MIN_ADDRESS 0x0000
	EERAM 3 memory address range.

#define	EERAM3_MAX_ADDRESS 0x7FFF

#define	EERAM3_MAX_PAGE_ADDRESS 0x3F

#define	EERAM3_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE
	Data sample selection.

#define	EERAM3_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

Detailed Description

Settings for registers of EERAM 3 Click driver.

Macro Definition Documentation

◆ EERAM3_ASE_BIT_MASK

#define EERAM3_ASE_BIT_MASK 0x40

◆ EERAM3_BLOCK_PROTECT_ALL

#define EERAM3_BLOCK_PROTECT_ALL 0x0C

◆ EERAM3_BLOCK_PROTECT_BITS_MASK

#define EERAM3_BLOCK_PROTECT_BITS_MASK 0x0C

◆ EERAM3_BLOCK_PROTECT_NONE

#define EERAM3_BLOCK_PROTECT_NONE 0x00

◆ EERAM3_BLOCK_PROTECT_UPPER_HALF

#define EERAM3_BLOCK_PROTECT_UPPER_HALF 0x08

◆ EERAM3_BLOCK_PROTECT_UPPER_QUARTER

#define EERAM3_BLOCK_PROTECT_UPPER_QUARTER 0x04

◆ EERAM3_MAX_ADDRESS

#define EERAM3_MAX_ADDRESS 0x7FFF

◆ EERAM3_MAX_PAGE_ADDRESS

#define EERAM3_MAX_PAGE_ADDRESS 0x3F

◆ EERAM3_MIN_ADDRESS

#define EERAM3_MIN_ADDRESS 0x0000

EERAM 3 memory address range.

Specified memory address range of EERAM 3 Click driver.

◆ EERAM3_PRO_BIT_MASK

#define EERAM3_PRO_BIT_MASK 0x20

◆ EERAM3_RDY_BIT_MASK

#define EERAM3_RDY_BIT_MASK 0x01

EERAM 3 status register bits mask.

Specified bits mask for status register of EERAM 3 Click driver.

◆ EERAM3_SET_DATA_SAMPLE_EDGE

#define EERAM3_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE

Data sample selection.

This macro sets data samples for SPI modules.

Note: Available only on Microchip PIC family devices. This macro will set data sampling for all SPI modules on MCU. Can be overwritten with eeram3_init which will set SET_SPI_DATA_SAMPLE_MIDDLE by default on the mapped mikrobus.

◆ EERAM3_SET_DATA_SAMPLE_MIDDLE

#define EERAM3_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

◆ EERAM3_SWM_BIT_MASK

#define EERAM3_SWM_BIT_MASK 0x10

◆ EERAM3_WEL_BIT_MASK

#define EERAM3_WEL_BIT_MASK 0x02

Macros