fan6/html/fan6_8h_source.html

/*

 * MikroSDK - MikroE Software Development Kit

 * Copyright© 2020 MikroElektronika d.o.o.

 *

 * Permission is hereby granted, free of charge, to any person

 * obtaining a copy of this software and associated documentation

 * files (the "Software"), to deal in the Software without restriction,

 * including without limitation the rights to use, copy, modify, merge,

 * publish, distribute, sublicense, and/or sell copies of the Software,

 * and to permit persons to whom the Software is furnished to do so,

 * subject to the following conditions:

 *

 * The above copyright notice and this permission notice shall be

 * included in all copies or substantial portions of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.

 * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE

 * OR OTHER DEALINGS IN THE SOFTWARE.

 */


// ----------------------------------------------------------------------------


#ifndef FAN6_H

#define FAN6_H


#ifdef PREINIT_SUPPORTED

#include "preinit.h"

#endif


#ifdef MikroCCoreVersion

    #if MikroCCoreVersion >= 1

        #include "delays.h"

    #endif

#endif


#include "drv_digital_out.h"

#include "drv_digital_in.h"

#include "drv_i2c_master.h"


// -------------------------------------------------------------- PUBLIC MACROS


#define FAN6_MAP_MIKROBUS( cfg, mikrobus ) \

  cfg.scl  = MIKROBUS( mikrobus, MIKROBUS_SCL ); \

  cfg.sda  = MIKROBUS( mikrobus, MIKROBUS_SDA ); \

  cfg.io1 = MIKROBUS( mikrobus, MIKROBUS_AN ); \

  cfg.sdn = MIKROBUS( mikrobus, MIKROBUS_RST ); \

  cfg.en = MIKROBUS( mikrobus, MIKROBUS_CS ); \

  cfg.io2 = MIKROBUS( mikrobus, MIKROBUS_PWM ); \

  cfg.alr = MIKROBUS( mikrobus, MIKROBUS_INT );


#define FAN6_RETVAL  uint8_t


#define FAN6_OK           0x00

#define FAN6_INIT_ERROR   0xFF

#define FAN6_INTERNAL_TEMP_READ_REG               0x00

#define FAN6_EXTDIODE1_TEMP_READ_REG              0x02

#define FAN6_EXTDIODE2_TEMP_READ_REG              0x04

#define FAN6_EXTDIODE3_TEMP_READ_REG              0x06

#define FAN6_CRITICAL_TEMP_REG                    0x0A

#define FAN6_PUSHED_TEMP1_REG                     0x0C

#define FAN6_PUSHED_TEMP2_REG                     0x0D

#define FAN6_TRIP_SET_VOLTAGE_REG                 0x10

#define FAN6_EXTDIODE1_IDEALITY_REG               0x11

#define FAN6_EXTDIODE2_IDEALITY_REG               0x12

#define FAN6_EXTDIODE1_BETA_CONFIG_REG            0x14

#define FAN6_EXTDIODE2_BETA_CONFIG_REG            0x15

#define FAN6_EXTDIODE_REC_CONFIG_REG              0x17

#define FAN6_EXTDIODE1_TCRIT_LIMIT_REG            0x19

#define FAN6_EXTDIODE2_TCRIT_LIMIT_REG            0x1A

#define FAN6_EXTDIODE3_TCRIT_LIMIT_REG            0x1B

#define FAN6_INTDIODE_TCRIT_LIMIT_REG             0x1D

#define FAN6_TCRIT_STATUS_REG                     0x1F

#define FAN6_CONFIGURATION_REG                    0x20

#define FAN6_CONFIGURATION2_REG                   0x21

#define FAN6_INTERRUPT_STATUS_REG                 0x23

#define FAN6_HIGH_LIMIT_STATUS_REG                0x24

#define FAN6_LOW_LIMIT_STATUS_REG                 0x25

#define FAN6_DIODE_FAULT_REG                      0x26

#define FAN6_FAN_STATUS_REG                       0x27

#define FAN6_INTERRUPT_EN_REG                     0x28

#define FAN6_FAN_INTERRUPT_EN_REG                 0x29

#define FAN6_PWM_CONFIG_REG                       0x2A

#define FAN6_PWM_BASE_FREQ_REG                    0x2B

#define FAN6_EXTDIODE1_HIGHTEMP_LIMIT_REG         0x30

#define FAN6_EXTDIODE2_HIGHTEMP_LIMIT_REG         0x31

#define FAN6_EXTDIODE3_HIGHTEMP_LIMIT_REG         0x32

#define FAN6_INTDIODE_HIGHTEMP_LIMIT_REG          0x34

#define FAN6_EXTDIODE1_LOWTEMP_LIMIT_REG          0x38

#define FAN6_EXTDIODE2_LOWTEMP_LIMIT_REG          0x39

#define FAN6_EXTDIODE3_LOWTEMP_LIMIT_REG          0x3A

#define FAN6_INTDIODE_LOWTEMP_LIMIT_REG           0x3C

#define FAN6_FAN_SETTING_REG                      0x40

#define FAN6_PWM_DIVIDE_REG                       0x41

#define FAN6_FAN_CONFIG1_REG                      0x42

#define FAN6_FAN_CONFIG2_REG                      0x43

#define FAN6_GAIN_REG                             0x45

#define FAN6_FAN_SPINUP_CONFIG_REG                0x46

#define FAN6_FAN_STEP_REG                         0x47

#define FAN6_FAN_MIN_DRIVE_REG                    0x48

#define FAN6_FAN_VALID_TACH_COUNT_REG             0x49

#define FAN6_FAN_DRIVE_FAIL_BAND_REG              0x4A

#define FAN6_TACH_TARGET_REG                      0x4C

#define FAN6_TACH_READING_REG                     0x4E

#define FAN6_LUT_CONFIG_REG                       0x50

#define FAN6_LUT_DRIVE1_REG                       0x51

#define FAN6_LUT_TEMP1_SETTING1_REG               0x52

#define FAN6_LUT_TEMP2_SETTING1_REG               0x53

#define FAN6_LUT_TEMP3_SETTING1_REG               0x54

#define FAN6_LUT_INTTEMP_SETTING1_REG             0x55

#define FAN6_LUT_DRIVE2_REG                       0x56

#define FAN6_LUT_TEMP1_SETTING2_REG               0x57

#define FAN6_LUT_TEMP2_SETTING2_REG               0x58

#define FAN6_LUT_TEMP3_SETTING2_REG               0x59

#define FAN6_LUT_INTTEMP_SETTING2_REG             0x5A

#define FAN6_LUT_DRIVE3_REG                       0x5B

#define FAN6_LUT_TEMP1_SETTING3_REG               0x5C

#define FAN6_LUT_TEMP2_SETTING3_REG               0x5D

#define FAN6_LUT_TEMP3_SETTING3_REG               0x5E

#define FAN6_LUT_INTTEMP_SETTING3_REG             0x5F

#define FAN6_LUT_DRIVE4_REG                       0x60

#define FAN6_LUT_TEMP1_SETTING4_REG               0x61

#define FAN6_LUT_TEMP2_SETTING4_REG               0x62

#define FAN6_LUT_TEMP3_SETTING4_REG               0x63

#define FAN6_LUT_INTTEMP_SETTING4_REG             0x64

#define FAN6_LUT_DRIVE5_REG                       0x65

#define FAN6_LUT_TEMP1_SETTING5_REG               0x66

#define FAN6_LUT_TEMP2_SETTING5_REG               0x67

#define FAN6_LUT_TEMP3_SETTING5_REG               0x68

#define FAN6_LUT_INTTEMP_SETTING5_REG             0x69

#define FAN6_LUT_DRIVE6_REG                       0x6A

#define FAN6_LUT_TEMP1_SETTING6_REG               0x6B

#define FAN6_LUT_TEMP2_SETTING6_REG               0x6C

#define FAN6_LUT_TEMP3_SETTING6_REG               0x6D

#define FAN6_LUT_INTTEMP_SETTING6_REG             0x6E

#define FAN6_LUT_DRIVE7_REG                       0x6F

#define FAN6_LUT_TEMP1_SETTING7_REG               0x70

#define FAN6_LUT_TEMP2_SETTING7_REG               0x71

#define FAN6_LUT_TEMP3_SETTING7_REG               0x72

#define FAN6_LUT_INTTEMP_SETTING7_REG             0x73

#define FAN6_LUT_DRIVE8_REG                       0x74

#define FAN6_LUT_TEMP1_SETTING8_REG               0x75

#define FAN6_LUT_TEMP2_SETTING8_REG               0x76

#define FAN6_LUT_TEMP3_SETTING8_REG               0x77

#define FAN6_LUT_INTTEMP_SETTING8_REG             0x78

#define FAN6_GPIO_DIR_REG                         0xE1

#define FAN6_GPIO_OUTPUT_CONFIG_REG               0xE2

#define FAN6_GPIO_INPUT_REG                       0xE3

#define FAN6_GPIO_OUTPUT_REG                      0xE4

#define FAN6_GPIO_INTERR_EN_REG                   0xE5

#define FAN6_GPIO_STATUS_REG                      0xE6

#define FAN6_SW_LOCK_REG                          0xEF

#define FAN6_PRODUCT_FEATURES_REG                 0xFC

#define FAN6_PRODUCT_ID_REG                       0xFD

#define FAN6_MANUFACTURER_ID_REG                  0xFE

#define FAN6_REVISION_REG                         0xFF

#define FAN6_AUTOBETA_DETECTION_DISABLED          0x00

#define FAN6_AUTOBETA_DETECTION_ENABLED           0x10

#define FAN6_MIN_BETA_80MILI                      0x00

#define FAN6_MIN_BETA_111MILI                     0x01

#define FAN6_MIN_BETA_176MILI                     0x02

#define FAN6_MIN_BETA_290MILI                     0x03

#define FAN6_MIN_BETA_480MILI                     0x04

#define FAN6_MIN_BETA_900MILI                     0x05

#define FAN6_MIN_BETA_2330MILI                    0x06

#define FAN6_MIN_BETA_DISABLED                    0x07

#define FAN6_EXTDIODE_REC_DISABLED                0x00

#define FAN6_EXTDIODE3_REC_ENABLED                0x04

#define FAN6_EXTDIODE2_REC_ENABLED                0x02

#define FAN6_EXTDIODE1_REC_ENABLED                0x01

#define FAN6_ALERT_PIN_UNMASKED                   0x00

#define FAN6_ALERT_PIN_MASKED                     0x80

#define FAN6_EXTDIODE_SYS_SHDN_PIN_NOT_LINKED     0x00

#define FAN6_EXTDIODE3_SYS_SHDN_PIN_LINKED        0x08

#define FAN6_EXTDIODE2_SYS_SHDN_PIN_LINKED        0x04

#define FAN6_EXTDIODE1_SYS_SHDN_PIN_LINKED        0x02

#define FAN6_ANTIPARALLEL_DIODE_FUNCT_DISABLED    0x00

#define FAN6_ANTIPARALLEL_DIODE_FUNCT_ENABLED     0x01

#define FAN6_DYNAMIC_AVERAGING_ENABLED            0x00

#define FAN6_DYNAMIC_AVERAGING_DISABLED           0x40

#define FAN6_SMBUS_ENABLED                        0x00

#define FAN6_SMBUS_DISABLED                       0x20

#define FAN6_DIGITAL_AVERAGING_ENABLED            0x00

#define FAN6_DIGITAL_AVERAGING_DISABLED           0x10

#define FAN6_CONSECUTIVE_OUTOFLIMIT_NUMBER_1      0x00

#define FAN6_CONSECUTIVE_OUTOFLIMIT_NUMBER_2      0x04

#define FAN6_CONSECUTIVE_OUTOFLIMIT_NUMBER_3      0x08

#define FAN6_CONSECUTIVE_OUTOFLIMIT_NUMBER_4      0x0C

#define FAN6_CONVERSION_RATE_1_PERSEC             0x00

#define FAN6_CONVERSION_RATE_2_PERSEC             0x01

#define FAN6_CONVERSION_RATE_4_PERSEC             0x02

#define FAN6_CONVERSION_RATE_CONTINUOUS           0x03

#define FAN6_ALL_INTERRUPTS_DISABLED              0x00

#define FAN6_EXTDIODE3_INTERRUPT_ENABLED          0x08

#define FAN6_EXTDIODE2_INTERRUPT_ENABLED          0x04

#define FAN6_EXTDIODE1_INTERRUPT_ENABLED          0x02

#define FAN6_INTDIODE_INTERRUPT_ENABLED           0x01

#define FAN6_ALL_FAN_INTERRUPTS_DISABLED          0x00

#define FAN6_FAN_SPIN_BIT_ENABLED                 0x02

#define FAN6_FAN_STALL_BIT_ENABLED                0x01

#define FAN6_PWM_PIN_OPEN_DRAIN                   0x00

#define FAN6_PWM_PIN_PUSH_PULL                    0x10

#define FAN6_NORMAL_POLARITY                      0x00

#define FAN6_INVERTED_POLARITY                    0x01

#define FAN6_PWM_BASE_FREQ_26000HZ                0x00

#define FAN6_PWM_BASE_FREQ_19531HZ                0x01

#define FAN6_PWM_BASE_FREQ_4882HZ                 0x02

#define FAN6_PWM_BASE_FREQ_2441HZ                 0x03

#define FAN6_0_PERCENT_SPEED                      0x00

#define FAN6_25_PERCENTS_SPEED                    0x40

#define FAN6_50_PERCENTS_SPEED                    0x80

#define FAN6_75_PERCENTS_SPEED                    0xC0

#define FAN6_100_PERCENTS_SPEED                   0xFF

#define FAN6_CONTROL_CIRCUITRY_DISABLED           0x00

#define FAN6_CONTROL_CIRCUITRY_ENABLED            0x80

#define FAN6_RANGE_MIN_500RPM                     0x00

#define FAN6_RANGE_MIN_1000RPM                    0x20

#define FAN6_RANGE_MIN_2000RPM                    0x40

#define FAN6_RANGE_MIN_4000RPM                    0x60

#define FAN6_MIN_3_EDGES                          0x00

#define FAN6_MIN_5_EDGES                          0x08

#define FAN6_MIN_7_EDGES                          0x10

#define FAN6_MIN_9_EDGES                          0x18

#define FAN6_UPDATE_TIME_100_MILISEC              0x00

#define FAN6_UPDATE_TIME_200_MILISEC              0x01

#define FAN6_UPDATE_TIME_300_MILISEC              0x02

#define FAN6_UPDATE_TIME_400_MILISEC              0x03

#define FAN6_UPDATE_TIME_500_MILISEC              0x04

#define FAN6_UPDATE_TIME_800_MILISEC              0x05

#define FAN6_UPDATE_TIME_1200_MILISEC             0x06

#define FAN6_UPDATE_TIME_1600_MILISEC             0x07

#define FAN6_RAMP_RATE_CONT_DISABLED              0x00

#define FAN6_RAMP_RATE_CONT_ENABLED               0x40

#define FAN6_GLITCH_FILTER_DISABLED               0x00

#define FAN6_GLITCH_FILTER_ENABLED                0x20

#define FAN6_NO_DERIVATIVE                        0x00

#define FAN6_BASIC_DERIVATIVE                     0x08

#define FAN6_STEP_DERIVATIVE                      0x10

#define FAN6_BOTH_DERIVATIVE                      0x18

#define FAN6_ERROR_RANGE_0RPM                     0x00

#define FAN6_ERROR_RANGE_50RPM                    0x02

#define FAN6_ERROR_RANGE_100RPM                   0x04

#define FAN6_ERROR_RANGE_200RPM                   0x06

#define FAN6_GAIN_1X                              0x00

#define FAN6_GAIN_2X                              0x15

#define FAN6_GAIN_4X                              0x2A

#define FAN6_GAIN_8X                              0x3F

#define FAN6_UPDATE_PERIODS_DISABLED              0x00

#define FAN6_16_UPDATE_PERIODS                    0x40

#define FAN6_32_UPDATE_PERIODS                    0x80

#define FAN6_64_UPDATE_PERIODS                    0xC0

#define FAN6_100_PERCENTS_PWM_DRIVE_ENABLED       0x00

#define FAN6_100_PERCENTS_PWM_DRIVE_DISABLED      0x20

#define FAN6_SPINUP_DRIVELEVEL_30_PERCENTS        0x00

#define FAN6_SPINUP_DRIVELEVEL_35_PERCENTS        0x04

#define FAN6_SPINUP_DRIVELEVEL_40_PERCENTS        0x08

#define FAN6_SPINUP_DRIVELEVEL_45_PERCENTS        0x0C

#define FAN6_SPINUP_DRIVELEVEL_50_PERCENTS        0x10

#define FAN6_SPINUP_DRIVELEVEL_55_PERCENTS        0x14

#define FAN6_SPINUP_DRIVELEVEL_60_PERCENTS        0x18

#define FAN6_SPINUP_DRIVELEVEL_65_PERCENTS        0x1C

#define FAN6_SPINUP_TIME_250_MILISEC              0x00

#define FAN6_SPINUP_TIME_500_MILISEC              0x01

#define FAN6_SPINUP_TIME_1_SEC                    0x02

#define FAN6_SPINUP_TIME_2_SEC                    0x03

#define FAN6_PUSH_TEMP_NOT_LOADED                 0x00

#define FAN6_PUSH_TEMP1_LOADED                    0x80

#define FAN6_PUSH_TEMP2_LOADED                    0x40

#define FAN6_LUT_ENABLED                          0x00

#define FAN6_LUT_LOCKED                           0x20

#define FAN6_RPM_TACH_ENABLED                     0x00

#define FAN6_PWM_DUTY_ENABLED                     0x10

#define FAN6_GPIO_DIR_INPUT                       0x00

#define FAN6_GPIO2_DIR_OUTPUT                     0x02

#define FAN6_GPIO1_DIR_OUTPUT                     0x01

#define FAN6_GPIO_AS_OPEN_DRAIN                   0x00

#define FAN6_GPIO2_AS_PUSH_PULL                   0x02

#define FAN6_GPIO1_AS_PUSH_PULL                   0x01

#define FAN6_GPIO_INTERR_DISABLED                 0x00

#define FAN6_GPIO2_INTERR_ENABLED                 0x02

#define FAN6_GPIO1_INTERR_ENABLED                 0x01

#define FAN6_SW_NOT_LOCKED                        0x00

#define FAN6_SW_LOCKED                            0x01

 // End group macro

// --------------------------------------------------------------- PUBLIC TYPES


typedef struct

{

    // Output pins


    digital_out_t io1;

    digital_out_t en;


    // Input pins


    digital_in_t sdn;

    digital_in_t io2;

    digital_in_t alr;


    // Modules


    i2c_master_t i2c;


    // ctx variable


    uint8_t slave_address;


    uint8_t check_ptr;

    uint8_t adc_mode;

    uint8_t config_byte1;

    uint8_t config_byte2;


} fan6_t;


typedef struct

{

    // Communication gpio pins


    pin_name_t scl;

    pin_name_t sda;


    // Additional gpio pins


    pin_name_t io1;

    pin_name_t sdn;

    pin_name_t en;

    pin_name_t io2;

    pin_name_t alr;


    // static variable


    uint32_t i2c_speed;

    uint8_t i2c_address;


} fan6_cfg_t;


 // End types group


// ----------------------------------------------- PUBLIC FUNCTION DECLARATIONS


#ifdef __cplusplus

extern "C"{

#endif


void fan6_cfg_setup ( fan6_cfg_t *cfg );


FAN6_RETVAL fan6_init ( fan6_t *ctx, fan6_cfg_t *cfg );


void fan6_default_cfg ( fan6_t *ctx );


void fan6_generic_write ( fan6_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len );


void fan6_generic_read ( fan6_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len );


void fan6_write_reg ( fan6_t *ctx, const uint8_t register_address, const uint16_t transfer_data );


uint16_t fan6_read_reg ( fan6_t *ctx, const uint8_t register_address );


uint8_t fan6_receive_byte ( fan6_t *ctx, const uint8_t register_address );


void fan6_read_eeprom ( fan6_t *ctx, uint8_t *data_out );


void fan6_set_pwm_mode ( fan6_t *ctx, const uint8_t pwm_duty );


void fan6_set_fan_speed_con_mode ( fan6_t *ctx, const uint8_t minimum_drive, const uint8_t tach_count, const uint16_t tach_target );


void fan6_set_pwm_lut_mode ( fan6_t *ctx, const uint8_t tach_count );


void fan6_set_fsc_lut_mode ( fan6_t *ctx, const uint8_t minimum_drive, const uint8_t tach_count );


uint32_t fan6_read_tachometer ( fan6_t *ctx );


float fan6_get_temperature ( fan6_t *ctx, const uint8_t temp_address );


void fan6_push_temperature ( fan6_t *ctx, const uint8_t temp_address, const uint8_t temp_selection );


void fan6_enable_device ( fan6_t *ctx, const uint8_t state );


uint8_t fan6_indicate_critical_thermal_shutdown ( fan6_t *ctx );


uint8_t fan6_get_gpio_2 ( fan6_t *ctx );


void fan6_set_gpio_1 ( fan6_t *ctx, const uint8_t state );


#ifdef __cplusplus

}

#endif

#endif  // _FAN6_H_


 // End public_function group


// ------------------------------------------------------------------------- END

FAN6_RETVAL
#define FAN6_RETVAL
Definition fan6.h:81

fan6_default_cfg
void fan6_default_cfg(fan6_t *ctx)
Click Default Configuration function.

fan6_set_fan_speed_con_mode
void fan6_set_fan_speed_con_mode(fan6_t *ctx, const uint8_t minimum_drive, const uint8_t tach_count, const uint16_t tach_target)
Fan Speed Control Mode Set function.

fan6_init
FAN6_RETVAL fan6_init(fan6_t *ctx, fan6_cfg_t *cfg)
Initialization function.

fan6_set_pwm_mode
void fan6_set_pwm_mode(fan6_t *ctx, const uint8_t pwm_duty)
PWM mode set function.

fan6_set_fsc_lut_mode
void fan6_set_fsc_lut_mode(fan6_t *ctx, const uint8_t minimum_drive, const uint8_t tach_count)
Set FSC With LUT Mode function.

fan6_read_tachometer
uint32_t fan6_read_tachometer(fan6_t *ctx)
Tachometer Read function.

fan6_cfg_setup
void fan6_cfg_setup(fan6_cfg_t *cfg)
Config Object Initialization function.

fan6_set_pwm_lut_mode
void fan6_set_pwm_lut_mode(fan6_t *ctx, const uint8_t tach_count)
Set PWM With LUT Mode function.

fan6_set_gpio_1
void fan6_set_gpio_1(fan6_t *ctx, const uint8_t state)
GPIO 1 Set function.

fan6_get_temperature
float fan6_get_temperature(fan6_t *ctx, const uint8_t temp_address)
Temperature Get function.

fan6_indicate_critical_thermal_shutdown
uint8_t fan6_indicate_critical_thermal_shutdown(fan6_t *ctx)
Interrupt Pin Get function.

fan6_receive_byte
uint8_t fan6_receive_byte(fan6_t *ctx, const uint8_t register_address)
Byte receive function.

fan6_get_gpio_2
uint8_t fan6_get_gpio_2(fan6_t *ctx)
GPIO 2 Get function.

fan6_write_reg
void fan6_write_reg(fan6_t *ctx, const uint8_t register_address, const uint16_t transfer_data)
Generic write function.

fan6_read_reg
uint16_t fan6_read_reg(fan6_t *ctx, const uint8_t register_address)
Generic read function.

fan6_enable_device
void fan6_enable_device(fan6_t *ctx, const uint8_t state)
Device Enable function.

fan6_push_temperature
void fan6_push_temperature(fan6_t *ctx, const uint8_t temp_address, const uint8_t temp_selection)
Temperature Push function.

fan6_generic_read
void fan6_generic_read(fan6_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.

fan6_generic_write
void fan6_generic_write(fan6_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.

fan6_read_eeprom
void fan6_read_eeprom(fan6_t *ctx, uint8_t *data_out)
EEPROM read function.

fan6_cfg_t
Click configuration structure definition.
Definition fan6.h:471

fan6_cfg_t::io1
pin_name_t io1
Definition fan6.h:479

fan6_cfg_t::alr
pin_name_t alr
Definition fan6.h:483

fan6_cfg_t::i2c_speed
uint32_t i2c_speed
Definition fan6.h:487

fan6_cfg_t::io2
pin_name_t io2
Definition fan6.h:482

fan6_cfg_t::scl
pin_name_t scl
Definition fan6.h:474

fan6_cfg_t::en
pin_name_t en
Definition fan6.h:481

fan6_cfg_t::sda
pin_name_t sda
Definition fan6.h:475

fan6_cfg_t::sdn
pin_name_t sdn
Definition fan6.h:480

fan6_cfg_t::i2c_address
uint8_t i2c_address
Definition fan6.h:488

fan6_t
Click ctx object definition.
Definition fan6.h:440

fan6_t::sdn
digital_in_t sdn
Definition fan6.h:448

fan6_t::alr
digital_in_t alr
Definition fan6.h:450

fan6_t::i2c
i2c_master_t i2c
Definition fan6.h:454

fan6_t::config_byte1
uint8_t config_byte1
Definition fan6.h:462

fan6_t::en
digital_out_t en
Definition fan6.h:444

fan6_t::io2
digital_in_t io2
Definition fan6.h:449

fan6_t::slave_address
uint8_t slave_address
Definition fan6.h:458

fan6_t::check_ptr
uint8_t check_ptr
Definition fan6.h:460

fan6_t::adc_mode
uint8_t adc_mode
Definition fan6.h:461

fan6_t::io1
digital_out_t io1
Definition fan6.h:443

fan6_t::config_byte2
uint8_t config_byte2
Definition fan6.h:463