fever.h

Go to the documentation of this file.

/*
 * MikroSDK - MikroE Software Development Kit
 * Copyright© 2020 MikroElektronika d.o.o.
 * 
 * Permission is hereby granted, free of charge, to any person 
 * obtaining a copy of this software and associated documentation 
 * files (the "Software"), to deal in the Software without restriction, 
 * including without limitation the rights to use, copy, modify, merge, 
 * publish, distribute, sublicense, and/or sell copies of the Software, 
 * and to permit persons to whom the Software is furnished to do so, 
 * subject to the following conditions:
 * 
 * The above copyright notice and this permission notice shall be 
 * included in all copies or substantial portions of the Software.
 * 
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 
 * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE 
 * OR OTHER DEALINGS IN THE SOFTWARE. 
 */
 
// ----------------------------------------------------------------------------
 
#ifndef FEVER_H
#define FEVER_H
 
#ifdef PREINIT_SUPPORTED
#include "preinit.h"
#endif
 
#ifdef MikroCCoreVersion
    #if MikroCCoreVersion >= 1
        #include "delays.h"
    #endif
#endif
 
#include "drv_digital_in.h"
#include "drv_i2c_master.h"
 
// -------------------------------------------------------------- PUBLIC MACROS 
#define FEVER_MAP_MIKROBUS( cfg, mikrobus ) \
  cfg.scl  = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
  cfg.sda  = MIKROBUS( mikrobus, MIKROBUS_SDA );\
  cfg.os   = MIKROBUS( mikrobus, MIKROBUS_INT )
#define FEVER_RETVAL  uint8_t
 
#define FEVER_OK           0x00
#define FEVER_INIT_ERROR   0xFF
#define FEVER_TEMP                         0x00
#define FEVER_CONFIG                       0x01
#define FEVER_THYST                        0x02
#define FEVER_TOS                          0x03
#define FEVER_SHUTDOWN                     0x01
#define FEVER_POWERUP                      0xFE
#define FEVER_INTERUPT_MODE                0x02
#define FEVER_COMPARATOR_MODE              0xFD
#define FEVER_OS_ACTIVE_HIGH               0x04
#define FEVER_OS_ACTIVE_LOW                0xFB
#define FEVER_FAULT_QUEUE_1                0xE7
#define FEVER_FAULT_QUEUE_2                0x08
#define FEVER_FAULT_QUEUE_4                0x10
#define FEVER_FAULT_QUEUE_6                0x18
#define FEVER_EXTENDED_DATA_FORMAT         0x20
#define FEVER_NORMAL_DATA_FORMAT           0xDF
#define FEVER_TIMEOUT_DISABLE              0x40
#define FEVER_TIMEOUT_ENABLE               0xBF
#define FEVER_ONE_SHOT_MEASURE             0x80
 // End group macro 
// --------------------------------------------------------------- PUBLIC TYPES
typedef struct
{
    // Input pins 
 
    digital_in_t os;
    
    // Modules 
 
    i2c_master_t i2c;
 
    // ctx variable 
 
    uint8_t slave_address;
 
} fever_t;
 
typedef struct
{
    // Communication gpio pins 
 
    pin_name_t scl;
    pin_name_t sda;
    
    // Additional gpio pins 
 
    pin_name_t os;
 
    // static variable 
 
    uint32_t i2c_speed;
    uint8_t i2c_address;
 
} fever_cfg_t;
 
 // End types group
// ----------------------------------------------- PUBLIC FUNCTION DECLARATIONS
 
#ifdef __cplusplus
extern "C"{
#endif
 
void fever_cfg_setup ( fever_cfg_t *cfg );
 
FEVER_RETVAL fever_init ( fever_t *ctx, fever_cfg_t *cfg );
 
void fever_default_cfg ( fever_t *ctx );
 
void fever_generic_write ( fever_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len );
 
void fever_generic_read ( fever_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len );
 
float fever_get_temperature ( fever_t *ctx );
 
#ifdef __cplusplus
}
#endif
#endif  // _FEVER_H_
 
 // End public_function group
 
// ------------------------------------------------------------------------- END