Settings for registers of Flash 10 Click driver. More...

Macros
#define	FLASH10_STATUS_REG_1 1
	Flash 10 status register numbers.

#define	FLASH10_STATUS_REG_2 2

#define	FLASH10_STATUS_REG_3 3

#define	FLASH10_STATUS_REG_4 4

#define	FLASH10_STATUS_REG_5 5

#define	FLASH10_STATUS1_SRP0 0x80
	Flash 10 status register 1 settings.

#define	FLASH10_STATUS1_BPSIZE 0x40

#define	FLASH10_STATUS1_TB 0x20

#define	FLASH10_STATUS1_WEL 0x02

#define	FLASH10_STATUS1_BSY 0x01

#define	FLASH10_MIN_ADDRESS 0x000000
	Flash 10 memory address range.

#define	FLASH10_MAX_ADDRESS 0x3FFFFFul

#define	FLASH10_PAGE_SIZE 256

#define	FLASH10_MANUFACTURER_ID 0x1F
	Flash 10 device ID.

#define	FLASH10_DEVICE_ID 0x47

#define	FLASH10_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE
	Data sample selection.

#define	FLASH10_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

Detailed Description

Settings for registers of Flash 10 Click driver.

Macro Definition Documentation

◆ FLASH10_DEVICE_ID

#define FLASH10_DEVICE_ID 0x47

◆ FLASH10_MANUFACTURER_ID

#define FLASH10_MANUFACTURER_ID 0x1F

Flash 10 device ID.

Specified device ID of Flash 10 Click driver.

◆ FLASH10_MAX_ADDRESS

#define FLASH10_MAX_ADDRESS 0x3FFFFFul

◆ FLASH10_MIN_ADDRESS

#define FLASH10_MIN_ADDRESS 0x000000

Flash 10 memory address range.

Specified memory address range of Flash 10 Click driver.

◆ FLASH10_PAGE_SIZE

#define FLASH10_PAGE_SIZE 256

◆ FLASH10_SET_DATA_SAMPLE_EDGE

#define FLASH10_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE

Data sample selection.

This macro sets data samples for SPI modules.

Note: Available only on Microchip PIC family devices. This macro will set data sampling for all SPI modules on MCU. Can be overwritten with flash10_init which will set SET_SPI_DATA_SAMPLE_MIDDLE by default on the mapped mikrobus.

◆ FLASH10_SET_DATA_SAMPLE_MIDDLE

#define FLASH10_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

◆ FLASH10_STATUS1_BPSIZE

#define FLASH10_STATUS1_BPSIZE 0x40

◆ FLASH10_STATUS1_BSY

#define FLASH10_STATUS1_BSY 0x01

◆ FLASH10_STATUS1_SRP0

#define FLASH10_STATUS1_SRP0 0x80

Flash 10 status register 1 settings.

Specified status register 1 settings of Flash 10 Click driver.

◆ FLASH10_STATUS1_TB

#define FLASH10_STATUS1_TB 0x20

◆ FLASH10_STATUS1_WEL

#define FLASH10_STATUS1_WEL 0x02

◆ FLASH10_STATUS_REG_1

#define FLASH10_STATUS_REG_1 1

Flash 10 status register numbers.

Specified status register numbers of Flash 10 Click driver.

◆ FLASH10_STATUS_REG_2

#define FLASH10_STATUS_REG_2 2

◆ FLASH10_STATUS_REG_3

#define FLASH10_STATUS_REG_3 3

◆ FLASH10_STATUS_REG_4

#define FLASH10_STATUS_REG_4 4

◆ FLASH10_STATUS_REG_5

#define FLASH10_STATUS_REG_5 5

Macros