FRAM 6 Registers Settings

Settings for registers of FRAM 6 Click driver. More...

Macros
#define	FRAM6_WEL_BIT_MASK   0x02
	FRAM 6 status register bits mask.
#define	FRAM6_BLOCK_PROTECT_BITS_MASK   0x0C
#define	FRAM6_BLOCK_PROTECT_NONE   0x00
#define	FRAM6_BLOCK_PROTECT_UPPER_QUARTER   0x04
#define	FRAM6_BLOCK_PROTECT_UPPER_HALF   0x08
#define	FRAM6_BLOCK_PROTECT_ALL   0x0C
#define	FRAM6_WPEN_BIT_MASK   0x80
#define	FRAM6_MIN_ADDRESS   0x00000
	FRAM 6 memory address range.
#define	FRAM6_MAX_ADDRESS   0x3FFFF
#define	FRAM6_SET_DATA_SAMPLE_EDGE   SET_SPI_DATA_SAMPLE_EDGE
	Data sample selection.
#define	FRAM6_SET_DATA_SAMPLE_MIDDLE   SET_SPI_DATA_SAMPLE_MIDDLE

Detailed Description

Settings for registers of FRAM 6 Click driver.

Macro Definition Documentation

FRAM6_BLOCK_PROTECT_ALL

#define FRAM6_BLOCK_PROTECT_ALL   0x0C

FRAM6_BLOCK_PROTECT_BITS_MASK

#define FRAM6_BLOCK_PROTECT_BITS_MASK   0x0C

FRAM6_BLOCK_PROTECT_NONE

#define FRAM6_BLOCK_PROTECT_NONE   0x00

FRAM6_BLOCK_PROTECT_UPPER_HALF

#define FRAM6_BLOCK_PROTECT_UPPER_HALF   0x08

FRAM6_BLOCK_PROTECT_UPPER_QUARTER

#define FRAM6_BLOCK_PROTECT_UPPER_QUARTER   0x04

FRAM6_MAX_ADDRESS

#define FRAM6_MAX_ADDRESS   0x3FFFF

FRAM6_MIN_ADDRESS

#define FRAM6_MIN_ADDRESS   0x00000

FRAM 6 memory address range.

Specified memory address range of FRAM 6 Click driver.

FRAM6_SET_DATA_SAMPLE_EDGE

#define FRAM6_SET_DATA_SAMPLE_EDGE   SET_SPI_DATA_SAMPLE_EDGE

Data sample selection.

This macro sets data samples for SPI modules.

Note

Available only on Microchip PIC family devices. This macro will set data sampling for all SPI modules on MCU. Can be overwritten with fram6_init which will set SET_SPI_DATA_SAMPLE_MIDDLE by default on the mapped mikrobus.

FRAM6_SET_DATA_SAMPLE_MIDDLE

#define FRAM6_SET_DATA_SAMPLE_MIDDLE   SET_SPI_DATA_SAMPLE_MIDDLE

FRAM6_WEL_BIT_MASK

#define FRAM6_WEL_BIT_MASK   0x02

FRAM 6 status register bits mask.

Specified bits mask for status register of FRAM 6 Click driver.

FRAM6_WPEN_BIT_MASK

#define FRAM6_WPEN_BIT_MASK   0x80