Settings for registers of G2C Click driver. More...

Macros
#define	G2C_CMD_AT "AT"
	G2C control commands.

#define	G2C_CMD_GMR "AT+GMR"

#define	G2C_CMD_ATE1 "ATE1"

#define	G2C_CMD_ATE0 "ATE0"

#define	G2C_CMD_RST "AT+RST"

#define	G2C_CMD_CRST "AT+CRST"

#define	G2C_CMD_CEN "AT+CEN"

#define	G2C_CMD_GPEN "AT+GPEN"

#define	G2C_CMD_W "AT+W"

#define	G2C_CMD_R "AT+R"

#define	G2C_CMD_NWP "AT+NWP"

#define	G2C_CMD_NWCR "AT+NWCR"

#define	G2C_CMD_NWC "AT+NWC"

#define	G2C_CMD_BRCR "AT+BRCR"

#define	G2C_CMD_BRC "AT+BRC"

#define	G2C_CMD_ASTA "AT+ASTA"

#define	G2C_CMD_DSET "AT+DSET"

#define	G2C_CMD_PUB "AT+PUB"

#define	G2C_RSP_OK "OK"
	G2C device response for AT commands.

#define	G2C_RSP_ERROR "ERROR"

#define	G2C_RSP_ERR "+ERR"

#define	G2C_RSP_ACT "+ACT"

#define	G2C_TX_DRV_BUFFER_SIZE 300
	G2C driver buffer size.

#define	G2C_RX_DRV_BUFFER_SIZE 300

Detailed Description

Settings for registers of G2C Click driver.

Macro Definition Documentation

◆ G2C_CMD_ASTA

#define G2C_CMD_ASTA "AT+ASTA"

◆ G2C_CMD_AT

#define G2C_CMD_AT "AT"

G2C control commands.

Specified setting for control commands of G2C Click driver.

◆ G2C_CMD_ATE0

#define G2C_CMD_ATE0 "ATE0"

◆ G2C_CMD_ATE1

#define G2C_CMD_ATE1 "ATE1"

◆ G2C_CMD_BRC

#define G2C_CMD_BRC "AT+BRC"

◆ G2C_CMD_BRCR

#define G2C_CMD_BRCR "AT+BRCR"

◆ G2C_CMD_CEN

#define G2C_CMD_CEN "AT+CEN"

◆ G2C_CMD_CRST

#define G2C_CMD_CRST "AT+CRST"

◆ G2C_CMD_DSET

#define G2C_CMD_DSET "AT+DSET"

◆ G2C_CMD_GMR

#define G2C_CMD_GMR "AT+GMR"

◆ G2C_CMD_GPEN

#define G2C_CMD_GPEN "AT+GPEN"

◆ G2C_CMD_NWC

#define G2C_CMD_NWC "AT+NWC"

◆ G2C_CMD_NWCR

#define G2C_CMD_NWCR "AT+NWCR"

◆ G2C_CMD_NWP

#define G2C_CMD_NWP "AT+NWP"

◆ G2C_CMD_PUB

#define G2C_CMD_PUB "AT+PUB"

◆ G2C_CMD_R

#define G2C_CMD_R "AT+R"

◆ G2C_CMD_RST

#define G2C_CMD_RST "AT+RST"

◆ G2C_CMD_W

#define G2C_CMD_W "AT+W"

◆ G2C_RSP_ACT

#define G2C_RSP_ACT "+ACT"

◆ G2C_RSP_ERR

#define G2C_RSP_ERR "+ERR"

◆ G2C_RSP_ERROR

#define G2C_RSP_ERROR "ERROR"

◆ G2C_RSP_OK

#define G2C_RSP_OK "OK"

G2C device response for AT commands.

Device response after commands.

◆ G2C_RX_DRV_BUFFER_SIZE

#define G2C_RX_DRV_BUFFER_SIZE 300

◆ G2C_TX_DRV_BUFFER_SIZE

#define G2C_TX_DRV_BUFFER_SIZE 300

G2C driver buffer size.

Specified size of driver ring buffer.

Note: Increase buffer size if needed.

Macros