Settings for registers of GainAMP 3 Click driver. More...

Macros
#define	GAINAMP3_SPI_CRC_ERR_DISABLE_BIT 0x20
	GainAMP 3 SPI CRC enable values.

#define	GAINAMP3_SPI_CRC_ENABLE 0x01

#define	GAINAMP3_SPI_CRC_DISABLE 0x00

#define	GAINAMP3_DIE_REV_ID 0x30
	GainAMP 3 DIE revision identification value.

#define	GAINAMP3_GAIN_1_OVER_16 0x00
	GainAMP 3 input amplifier gain levels values.

#define	GAINAMP3_GAIN_1_OVER_8 0x01

#define	GAINAMP3_GAIN_1_OVER_4 0x02

#define	GAINAMP3_GAIN_1_OVER_2 0x03

#define	GAINAMP3_GAIN_1 0x04

#define	GAINAMP3_GAIN_2 0x05

#define	GAINAMP3_GAIN_4 0x06

#define	GAINAMP3_GAIN_8 0x07

#define	GAINAMP3_GAIN_16 0x08

#define	GAINAMP3_GAIN_32 0x09

#define	GAINAMP3_GAIN_64 0x0A

#define	GAINAMP3_GAIN_128 0x0B

#define	GAINAMP3_GAIN_BITS_MASK 0x78

#define	GAINAMP3_CHANNEL_1 0x00
	GainAMP 3 input channel values.

#define	GAINAMP3_CHANNEL_2 0x01

#define	GAINAMP3_CHANNEL_TEST 0x02

#define	GAINAMP3_CHANNEL_SHORT_SWITCH 0x03

#define	GAINAMP3_CHANNEL_BITS_MASK 0x60

#define	GAINAMP3_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE
	Data sample selection.

#define	GAINAMP3_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

Detailed Description

Settings for registers of GainAMP 3 Click driver.

Macro Definition Documentation

◆ GAINAMP3_CHANNEL_1

#define GAINAMP3_CHANNEL_1 0x00

GainAMP 3 input channel values.

Specified values for input channels of GainAMP 3 Click driver.

◆ GAINAMP3_CHANNEL_2

#define GAINAMP3_CHANNEL_2 0x01

◆ GAINAMP3_CHANNEL_BITS_MASK

#define GAINAMP3_CHANNEL_BITS_MASK 0x60

◆ GAINAMP3_CHANNEL_SHORT_SWITCH

#define GAINAMP3_CHANNEL_SHORT_SWITCH 0x03

◆ GAINAMP3_CHANNEL_TEST

#define GAINAMP3_CHANNEL_TEST 0x02

◆ GAINAMP3_DIE_REV_ID

#define GAINAMP3_DIE_REV_ID 0x30

GainAMP 3 DIE revision identification value.

Specified value for DIE revision identification of GainAMP 3 Click driver.

◆ GAINAMP3_GAIN_1

#define GAINAMP3_GAIN_1 0x04

◆ GAINAMP3_GAIN_128

#define GAINAMP3_GAIN_128 0x0B

◆ GAINAMP3_GAIN_16

#define GAINAMP3_GAIN_16 0x08

◆ GAINAMP3_GAIN_1_OVER_16

#define GAINAMP3_GAIN_1_OVER_16 0x00

GainAMP 3 input amplifier gain levels values.

Specified values for input amplifier gain levels of GainAMP 3 Click driver.

◆ GAINAMP3_GAIN_1_OVER_2

#define GAINAMP3_GAIN_1_OVER_2 0x03

◆ GAINAMP3_GAIN_1_OVER_4

#define GAINAMP3_GAIN_1_OVER_4 0x02

◆ GAINAMP3_GAIN_1_OVER_8

#define GAINAMP3_GAIN_1_OVER_8 0x01

◆ GAINAMP3_GAIN_2

#define GAINAMP3_GAIN_2 0x05

◆ GAINAMP3_GAIN_32

#define GAINAMP3_GAIN_32 0x09

◆ GAINAMP3_GAIN_4

#define GAINAMP3_GAIN_4 0x06

◆ GAINAMP3_GAIN_64

#define GAINAMP3_GAIN_64 0x0A

◆ GAINAMP3_GAIN_8

#define GAINAMP3_GAIN_8 0x07

◆ GAINAMP3_GAIN_BITS_MASK

#define GAINAMP3_GAIN_BITS_MASK 0x78

◆ GAINAMP3_SET_DATA_SAMPLE_EDGE

#define GAINAMP3_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE

Data sample selection.

This macro sets data samples for SPI modules.

Note: Available only on Microchip PIC family devices. This macro will set data sampling for all SPI modules on MCU. Can be overwritten with gainamp3_init which will set SET_SPI_DATA_SAMPLE_MIDDLE by default on the mapped mikrobus.

◆ GAINAMP3_SET_DATA_SAMPLE_MIDDLE

#define GAINAMP3_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

◆ GAINAMP3_SPI_CRC_DISABLE

#define GAINAMP3_SPI_CRC_DISABLE 0x00

◆ GAINAMP3_SPI_CRC_ENABLE

#define GAINAMP3_SPI_CRC_ENABLE 0x01

◆ GAINAMP3_SPI_CRC_ERR_DISABLE_BIT

#define GAINAMP3_SPI_CRC_ERR_DISABLE_BIT 0x20

GainAMP 3 SPI CRC enable values.

Specified values for SPI CRC enable of GainAMP 3 Click driver.

Macros