Settings for registers of GNSS 10 Click driver. More...

Macros
#define	GNSS10_RSP_START "$"
	GNSS 10 response buffer commands.

#define	GNSS10_RSP_DELIMITER ","

#define	GNSS10_RSP_GNGGA "$GNGGA"

#define	GNSS10_GNGGA_ELEMENT_SIZE 15
	GNSS 10 GNGGA command elements.

#define	GNSS10_GNGGA_TIME 1

#define	GNSS10_GNGGA_LATITUDE 2

#define	GNSS10_GNGGA_LATITUDE_SIDE 3

#define	GNSS10_GNGGA_LONGITUDE 4

#define	GNSS10_GNGGA_LONGITUDE_SIDE 5

#define	GNSS10_GNGGA_QUALITY_INDICATOR 6

#define	GNSS10_GNGGA_NUMBER_OF_SATELLITES 7

#define	GNSS10_GNGGA_H_DILUTION_OF_POS 8

#define	GNSS10_GNGGA_ALTITUDE 9

#define	GNSS10_GNGGA_ALTITUDE_UNIT 10

#define	GNSS10_GNGGA_GEOIDAL_SEPARATION 11

#define	GNSS10_GNGGA_GEOIDAL_SEPARATION_UNIT 12

#define	GNSS10_GNGGA_TIME_SINCE_LAST_DGPS 13

#define	GNSS10_GNGGA_DGPS_REFERENCE_STATION_ID 14

#define	GNSS10_DUMMY 0xFF
	GNSS 10 dummy data.

#define	GNSS10_SET_DEV_ADDR 0x42
	GNSS 10 device address setting.

#define	DRV_BUFFER_SIZE 200
	GNSS 10 driver buffer size.

#define	GNSS10_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE
	Data sample selection.

#define	GNSS10_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

Detailed Description

Settings for registers of GNSS 10 Click driver.

Macro Definition Documentation

◆ DRV_BUFFER_SIZE

#define DRV_BUFFER_SIZE 200

GNSS 10 driver buffer size.

Specified size of driver ring buffer.

Note: Increase buffer size if needed.

◆ GNSS10_DUMMY

#define GNSS10_DUMMY 0xFF

GNSS 10 dummy data.

Definition of dummy data.

◆ GNSS10_GNGGA_ALTITUDE

#define GNSS10_GNGGA_ALTITUDE 9

◆ GNSS10_GNGGA_ALTITUDE_UNIT

#define GNSS10_GNGGA_ALTITUDE_UNIT 10

◆ GNSS10_GNGGA_DGPS_REFERENCE_STATION_ID

#define GNSS10_GNGGA_DGPS_REFERENCE_STATION_ID 14

◆ GNSS10_GNGGA_ELEMENT_SIZE

#define GNSS10_GNGGA_ELEMENT_SIZE 15

GNSS 10 GNGGA command elements.

Specified GNGGA command elements of GNSS 10 Click driver.

◆ GNSS10_GNGGA_GEOIDAL_SEPARATION

#define GNSS10_GNGGA_GEOIDAL_SEPARATION 11

◆ GNSS10_GNGGA_GEOIDAL_SEPARATION_UNIT

#define GNSS10_GNGGA_GEOIDAL_SEPARATION_UNIT 12

◆ GNSS10_GNGGA_H_DILUTION_OF_POS

#define GNSS10_GNGGA_H_DILUTION_OF_POS 8

◆ GNSS10_GNGGA_LATITUDE

#define GNSS10_GNGGA_LATITUDE 2

◆ GNSS10_GNGGA_LATITUDE_SIDE

#define GNSS10_GNGGA_LATITUDE_SIDE 3

◆ GNSS10_GNGGA_LONGITUDE

#define GNSS10_GNGGA_LONGITUDE 4

◆ GNSS10_GNGGA_LONGITUDE_SIDE

#define GNSS10_GNGGA_LONGITUDE_SIDE 5

◆ GNSS10_GNGGA_NUMBER_OF_SATELLITES

#define GNSS10_GNGGA_NUMBER_OF_SATELLITES 7

◆ GNSS10_GNGGA_QUALITY_INDICATOR

#define GNSS10_GNGGA_QUALITY_INDICATOR 6

◆ GNSS10_GNGGA_TIME

#define GNSS10_GNGGA_TIME 1

◆ GNSS10_GNGGA_TIME_SINCE_LAST_DGPS

#define GNSS10_GNGGA_TIME_SINCE_LAST_DGPS 13

◆ GNSS10_RSP_DELIMITER

#define GNSS10_RSP_DELIMITER ","

◆ GNSS10_RSP_GNGGA

#define GNSS10_RSP_GNGGA "$GNGGA"

◆ GNSS10_RSP_START

#define GNSS10_RSP_START "$"

GNSS 10 response buffer commands.

Specified response buffer commands of GNSS 10 Click driver.

◆ GNSS10_SET_DATA_SAMPLE_EDGE

#define GNSS10_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE

Data sample selection.

This macro sets data samples for SPI modules.

Note: Available only on Microchip PIC family devices. This macro will set data sampling for all SPI modules on MCU. Can be overwritten with gnss10_init which will set SET_SPI_DATA_SAMPLE_MIDDLE by default on the mapped mikrobus.

◆ GNSS10_SET_DATA_SAMPLE_MIDDLE

#define GNSS10_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

◆ GNSS10_SET_DEV_ADDR

#define GNSS10_SET_DEV_ADDR 0x42

GNSS 10 device address setting.

Specified setting for device slave address selection of GNSS 10 Click driver.

Macros