main.c File Reference

I2cIsolator4 Click example. More...

#include "board.h"
#include "log.h"
#include "i2cisolator4.h"

Macros
#define	I2CISOLATOR4_VAV_PRESS_DEV_ADDR   0x5C
#define	I2CISOLATOR4_VAV_PRESS_CMD_START_PRESSURE_CONVERSION   0x21
#define	I2CISOLATOR4_VAV_PRESS_PRESS_SCALE_FACTOR   1200
#define	I2CISOLATOR4_VAV_PRESS_TEMP_SCALE_FACTOR   72
#define	I2CISOLATOR4_VAV_PRESS_READOUT_AT_KNOWN_TEMPERATURE   105
#define	I2CISOLATOR4_VAV_PRESS_KNOWN_TEMPERATURE_C   23.1

Functions
void	get_dif_press_and_temp (void)
void	application_init (void)
void	application_task (void)
int	main (void)

Detailed Description

I2cIsolator4 Click example.

Description

This library contains API for the I2C Isolator 4 click driver. This demo application shows an example of an I2C Isolator 4 click wired to the VAV Press click for reading differential pressure and temperature measurement.

The demo application is composed of two sections :

Application Init

Initialization of I2C module and log UART. After driver initialization and default settings, the app set VAV Press click I2C slave address ( 0x5C ) and enable device.

Application Task

This is an example that shows the use of an I2C Isolator 4 click board™. Logs pressure difference [ Pa ] and temperature [ degree Celsius ] values of the VAV Press click wired to the I2C Isolator 4 click board™.
Results are being sent to the Usart Terminal where you can track their changes.

Note

void get_dif_press_and_temp ( void ) - Get differential pressure and temperature function.

Author

Nenad Filipovic

Macro Definition Documentation

I2CISOLATOR4_VAV_PRESS_CMD_START_PRESSURE_CONVERSION

#define I2CISOLATOR4_VAV_PRESS_CMD_START_PRESSURE_CONVERSION   0x21

I2CISOLATOR4_VAV_PRESS_DEV_ADDR

#define I2CISOLATOR4_VAV_PRESS_DEV_ADDR   0x5C

I2CISOLATOR4_VAV_PRESS_KNOWN_TEMPERATURE_C

#define I2CISOLATOR4_VAV_PRESS_KNOWN_TEMPERATURE_C   23.1

I2CISOLATOR4_VAV_PRESS_PRESS_SCALE_FACTOR

#define I2CISOLATOR4_VAV_PRESS_PRESS_SCALE_FACTOR   1200

I2CISOLATOR4_VAV_PRESS_READOUT_AT_KNOWN_TEMPERATURE

#define I2CISOLATOR4_VAV_PRESS_READOUT_AT_KNOWN_TEMPERATURE   105

I2CISOLATOR4_VAV_PRESS_TEMP_SCALE_FACTOR

#define I2CISOLATOR4_VAV_PRESS_TEMP_SCALE_FACTOR   72

Function Documentation

application_init()

void application_init

(

void

)

< Logger config object.

< Click config object.

Logger initialization. Default baud rate: 115200 Default log level: LOG_LEVEL_DEBUG

Note

If USB_UART_RX and USB_UART_TX are defined as HAL_PIN_NC, you will need to define them manually for log to work. See LOG_MAP_USB_UART macro definition for detailed explanation.

application_task()

void application_task

(

void

)

get_dif_press_and_temp()

void get_dif_press_and_temp

(

void

)

main()

int main

(

void

)