API for configuring and manipulating IoT ExpressLink 3 Click driver. More...

Topics
	IoT ExpressLink 3 Device Settings
	Settings for registers of IoT ExpressLink 3 Click driver.

	IoT ExpressLink 3 MikroBUS Map
	MikroBUS pin mapping of IoT ExpressLink 3 Click driver.

Functions
void	iotexpresslink3_cfg_setup (iotexpresslink3_cfg_t *cfg)
	IoT ExpressLink 3 configuration object setup function.

err_t	iotexpresslink3_init (iotexpresslink3_t ctx, iotexpresslink3_cfg_t cfg)
	IoT ExpressLink 3 initialization function.

err_t	iotexpresslink3_generic_write (iotexpresslink3_t ctx, uint8_t data_in, uint16_t len)
	IoT ExpressLink 3 data writing function.

err_t	iotexpresslink3_generic_read (iotexpresslink3_t ctx, uint8_t data_out, uint16_t len)
	IoT ExpressLink 3 data reading function.

void	iotexpresslink3_send_cmd (iotexpresslink3_t ctx, uint8_t cmd)
	IoT ExpressLink 3 send cmd function.

void	iotexpresslink3_enable_device (iotexpresslink3_t *ctx)
	IoT ExpressLink 3 enable device function.

void	iotexpresslink3_disable_device (iotexpresslink3_t *ctx)
	IoT ExpressLink 3 disable device function.

void	iotexpresslink3_reset_device (iotexpresslink3_t *ctx)
	IoT ExpressLink 3 reset device function.

uint8_t	iotexpresslink3_get_rsn_pin (iotexpresslink3_t *ctx)
	IoT ExpressLink 3 get rsn pin function.

uint8_t	iotexpresslink3_get_event_pin (iotexpresslink3_t *ctx)
	IoT ExpressLink 3 get event pin function.

uint8_t	iotexpresslink3_get_wake_pin (iotexpresslink3_t *ctx)
	IoT ExpressLink 3 get wake pin function.

Detailed Description

API for configuring and manipulating IoT ExpressLink 3 Click driver.

Any initialization code needed for MCU to function properly. Do not remove this line or clock might not be set correctly.

Function Documentation

◆ iotexpresslink3_cfg_setup()

void iotexpresslink3_cfg_setup ( iotexpresslink3_cfg_t * cfg )

IoT ExpressLink 3 configuration object setup function.

This function initializes click configuration structure to initial values.

Parameters

[out] cfg : Click configuration structure. See iotexpresslink3_cfg_t object definition for detailed explanation.

Returns: Nothing.

Note: The all used pins will be set to unconnected state.

◆ iotexpresslink3_disable_device()

void iotexpresslink3_disable_device ( iotexpresslink3_t * ctx )

IoT ExpressLink 3 disable device function.

This function disables device by setting the RST pin to low logic state.

Parameters

[in] ctx : Click context object. See iotexpresslink3_t object definition for detailed explanation.

Returns: None.

Note: None.

◆ iotexpresslink3_enable_device()

void iotexpresslink3_enable_device ( iotexpresslink3_t * ctx )

IoT ExpressLink 3 enable device function.

This function enables device by setting the RST pin to high logic state.

Parameters

[in] ctx : Click context object. See iotexpresslink3_t object definition for detailed explanation.

Returns: None.

Note: None.

◆ iotexpresslink3_generic_read()

err_t iotexpresslink3_generic_read	(	iotexpresslink3_t *	ctx,
		uint8_t *	data_out,
		uint16_t	len )

IoT ExpressLink 3 data reading function.

This function reads a desired number of data bytes by using UART serial interface.

Parameters

[in]	ctx	: Click context object. See iotexpresslink3_t object definition for detailed explanation.
[out]	data_out	: Output read data.
[in]	len	: Number of bytes to be read.

Returns

>0 - Number of data bytes read,
<=0 - Error/Empty Ring buffer. See #err_t definition for detailed explanation.

Note: None.

◆ iotexpresslink3_generic_write()

err_t iotexpresslink3_generic_write	(	iotexpresslink3_t *	ctx,
		uint8_t *	data_in,
		uint16_t	len )

IoT ExpressLink 3 data writing function.

This function writes a desired number of data bytes by using UART serial interface.

Parameters

[in]	ctx	: Click context object. See iotexpresslink3_t object definition for detailed explanation.
[in]	data_in	: Data buffer for sending.
[in]	len	: Number of bytes for sending.

Returns

>=0 - Success,
<0 - Error. See #err_t definition for detailed explanation.

Note: None.

◆ iotexpresslink3_get_event_pin()

uint8_t iotexpresslink3_get_event_pin ( iotexpresslink3_t * ctx )

IoT ExpressLink 3 get event pin function.

This function returns the event pin logic state.

Parameters

[in] ctx : Click context object. See iotexpresslink3_t object definition for detailed explanation.

Returns: Pin logic state.

Note: None.

◆ iotexpresslink3_get_rsn_pin()

uint8_t iotexpresslink3_get_rsn_pin ( iotexpresslink3_t * ctx )

IoT ExpressLink 3 get rsn pin function.

This function returns the RSN pin logic state.

Parameters

[in] ctx : Click context object. See iotexpresslink3_t object definition for detailed explanation.

Returns: Pin logic state.

Note: None.

◆ iotexpresslink3_get_wake_pin()

uint8_t iotexpresslink3_get_wake_pin ( iotexpresslink3_t * ctx )

IoT ExpressLink 3 get wake pin function.

This function returns the wake pin logic state.

Parameters

[in] ctx : Click context object. See iotexpresslink3_t object definition for detailed explanation.

Returns: Pin logic state.

Note: None.

◆ iotexpresslink3_init()

err_t iotexpresslink3_init	(	iotexpresslink3_t *	ctx,
		iotexpresslink3_cfg_t *	cfg )

IoT ExpressLink 3 initialization function.

This function initializes all necessary pins and peripherals used for this click board.

Parameters

[out]	ctx	: Click context object. See iotexpresslink3_t object definition for detailed explanation.
[in]	cfg	: Click configuration structure. See iotexpresslink3_cfg_t object definition for detailed explanation.

Returns

0 - Success,
-1 - Error. See #err_t definition for detailed explanation.

Note: None.

◆ iotexpresslink3_reset_device()

void iotexpresslink3_reset_device ( iotexpresslink3_t * ctx )

IoT ExpressLink 3 reset device function.

This function resets device by toggling the RST pin state.

Parameters

[in] ctx : Click context object. See iotexpresslink3_t object definition for detailed explanation.

Returns: None.

Note: None.

◆ iotexpresslink3_send_cmd()

void iotexpresslink3_send_cmd	(	iotexpresslink3_t *	ctx,
		uint8_t *	cmd )

IoT ExpressLink 3 send cmd function.

This function send command string by using UART serial interface.

Parameters

[in]	ctx	: Click context object. See iotexpresslink3_t object definition for detailed explanation.
[in]	cmd	: Command string to send.

Returns: None.

Note: None.

Topics

Functions

Detailed Description

Function Documentation

◆ iotexpresslink3_cfg_setup()

◆ iotexpresslink3_disable_device()

◆ iotexpresslink3_enable_device()

◆ iotexpresslink3_generic_read()

◆ iotexpresslink3_generic_write()

◆ iotexpresslink3_get_event_pin()

◆ iotexpresslink3_get_rsn_pin()

◆ iotexpresslink3_get_wake_pin()

◆ iotexpresslink3_init()

◆ iotexpresslink3_reset_device()

◆ iotexpresslink3_send_cmd()