Settings for registers of LDC 2 Click driver. More...

Macros
#define	LDC2_DEVICE_ID 0x84
	LDC 2 Device ID value.

#define	LDC2_SPI_READ_MASK 0x80
	LDC 2 SPI read/write bit mask.

#define	LDC2_SPI_WRITE_MASK 0x7F

#define	LDC2_COMPARATOR_THLD_MIN 0x00
	LDC 2 Comparator threshold range.

#define	LDC2_COMPARATOR_THLD_MAX 0xFF

#define	LDC2_STATUS_OSC_STOPPED 0x80
	LDC 2 status register flags.

#define	LDC2_STATUS_NO_NEW_DATA 0x40

#define	LDC2_STATUS_WAKE_UP_DISABLED 0x20

#define	LDC2_STATUS_PROX_DATA_LESS_THAN_THLD 0x10

#define	LDC2_MHZ_TO_HZ 1000000.0
	LDC 2 contants.

#define	LDC2_EXTERNAL_OSC_MHZ 1.8432

#define	LDC2_PARALLEL_CAPACITANCE_uF 0.000047

#define	LDC2_MIN_SENSOR_FREQ_CONST 68.94

#define	LDC2_MIN_SENSOR_FREQ_DIVIDER 2500.0

#define	LDC2_ROUND_TO_NEAREST_INT 0.5

#define	LDC2_MATH_TWO_PI 6.28318530717958

#define	LDC2_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE
	Data sample selection.

#define	LDC2_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

Detailed Description

Settings for registers of LDC 2 Click driver.

Macro Definition Documentation

◆ LDC2_COMPARATOR_THLD_MAX

#define LDC2_COMPARATOR_THLD_MAX 0xFF

◆ LDC2_COMPARATOR_THLD_MIN

#define LDC2_COMPARATOR_THLD_MIN 0x00

LDC 2 Comparator threshold range.

Specified range for comparator threshold of LDC 2 Click driver.

◆ LDC2_DEVICE_ID

#define LDC2_DEVICE_ID 0x84

LDC 2 Device ID value.

Specified value for device ID of LDC 2 Click driver.

◆ LDC2_EXTERNAL_OSC_MHZ

#define LDC2_EXTERNAL_OSC_MHZ 1.8432

◆ LDC2_MATH_TWO_PI

#define LDC2_MATH_TWO_PI 6.28318530717958

◆ LDC2_MHZ_TO_HZ

#define LDC2_MHZ_TO_HZ 1000000.0

LDC 2 contants.

Specified constants for LDC 2 Click driver.

◆ LDC2_MIN_SENSOR_FREQ_CONST

#define LDC2_MIN_SENSOR_FREQ_CONST 68.94

◆ LDC2_MIN_SENSOR_FREQ_DIVIDER

#define LDC2_MIN_SENSOR_FREQ_DIVIDER 2500.0

◆ LDC2_PARALLEL_CAPACITANCE_uF

#define LDC2_PARALLEL_CAPACITANCE_uF 0.000047

◆ LDC2_ROUND_TO_NEAREST_INT

#define LDC2_ROUND_TO_NEAREST_INT 0.5

◆ LDC2_SET_DATA_SAMPLE_EDGE

#define LDC2_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE

Data sample selection.

This macro sets data samples for SPI modules.

Note: Available only on Microchip PIC family devices. This macro will set data sampling for all SPI modules on MCU. Can be overwritten with ldc2_init which will set SET_SPI_DATA_SAMPLE_MIDDLE by default on the mapped mikrobus.

◆ LDC2_SET_DATA_SAMPLE_MIDDLE

#define LDC2_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

◆ LDC2_SPI_READ_MASK

#define LDC2_SPI_READ_MASK 0x80

LDC 2 SPI read/write bit mask.

Specified bit mask for SPI read/write of LDC 2 Click driver.

◆ LDC2_SPI_WRITE_MASK

#define LDC2_SPI_WRITE_MASK 0x7F

◆ LDC2_STATUS_NO_NEW_DATA

#define LDC2_STATUS_NO_NEW_DATA 0x40

◆ LDC2_STATUS_OSC_STOPPED

#define LDC2_STATUS_OSC_STOPPED 0x80

LDC 2 status register flags.

Specified flags for status register of LDC 2 Click driver.

◆ LDC2_STATUS_PROX_DATA_LESS_THAN_THLD

#define LDC2_STATUS_PROX_DATA_LESS_THAN_THLD 0x10

◆ LDC2_STATUS_WAKE_UP_DISABLED

#define LDC2_STATUS_WAKE_UP_DISABLED 0x20

Macros