Settings for registers of Load Cell 4 Click driver. More...

Macros
#define	LOADCELL4_GET_RESULT_ERROR 0
	Load Cell 4 description setting.

#define	LOADCELL4_GET_RESULT_OK 1

#define	LOADCELL4_DATA_NO_DATA 0

#define	LOADCELL4_DATA_OK 1

#define	LOADCELL4_WEIGHT_100G 100

#define	LOADCELL4_WEIGHT_500G 500

#define	LOADCELL4_WEIGHT_1000G 1000

#define	LOADCELL4_WEIGHT_5000G 5000

#define	LOADCELL4_WEIGHT_10000G 10000

#define	LOADCELL4_DEFAULT_WEIGHT_SCALE_COEFFICIENT 0.088495575221

#define	LOADCELL4_EEPROM_ID_0 0x00
	Load Cell 4 eeprom setting.

#define	LOADCELL4_EEPROM_CONFIG_1 0x01

#define	LOADCELL4_EEPROM_CONFIG_2 0x02

#define	LOADCELL4_EEPROM_OFFSET_BRIDGE 0x03

#define	LOADCELL4_EEPROM_GAIN_BRIDGE 0x04

#define	LOADCELL4_EEPROM_TEMP_COF_GAIN 0x05

#define	LOADCELL4_EEPROM_TEMP_COF_OFFSET 0x06

#define	LOADCELL4_EEPROM_2ND_ORDER_TEMP_COF_OFFSET 0x07

#define	LOADCELL4_EEPROM_2ND_ORDER_TEMP_COF_GAIN 0x08

#define	LOADCELL4_EEPROM_2ND_ORDER_BRIDGE 0x09

#define	LOADCELL4_EEPROM_OFFSET_TEMP 0x0A

#define	LOADCELL4_EEPROM_GAINT_TEMP 0x0B

#define	LOADCELL4_EEPROM_2ND_ORDER_TEMP 0x0C

#define	LOADCELL4_EEPROM_TEMP_SETL 0x0D

#define	LOADCELL4_EEPROM_ID_1 0x0E

#define	LOADCELL4_EEPROM_BRIDGE_CONFIG 0x0F

#define	LOADCELL4_EEPROM_TEMP_CONFIG 0x10

#define	LOADCELL4_EEPROM_OSC_TRIM 0x11

#define	LOADCELL4_EEPROM_SIGNATURE 0x12

#define	LOADCELL4_EEPROM_ID_2 0x13

#define	LOADCELL4_EEPROM_WRITE_CMD 0x40

#define	LOADCELL4_EEPROM_STATUS_READ_READY 0x5A

#define	LOADCELL4_STATUS_NORMAL 0x00
	Load Cell 4 status.

#define	LOADCELL4_STATUS_CMD_MODE 0x01

#define	LOADCELL4_STATUS_STALE_DATA 0x02

#define	LOADCELL4_STATUS_ERROR 0x03

#define	LOADCELL4_STATUS_BIT_MASK 0x03

#define	LOADCELL4_BRIDGE_RES 0x3FFF

#define	LOADCELL4_DUMMY 0x0000
	Load Cell 4 dummy.

#define	LOADCELL4_PWR_OFF 0x00
	Load Cell 4 power setting.

#define	LOADCELL4_PWR_ON 0x01

#define	LOADCELL4_WEIGHT_ZERO 0.000
	Load Cell 4 zero weight.

#define	LOADCELL4_NUMB_OF_SUM_AVG_20 20.00
	Load Cell 4 number of average values.

#define	LOADCELL4_NUMB_OF_SUM_AVG_100 100.0

#define	LOADCELL4_CMD_MODE_START 0xA0
	Load Cell 4 command mode.

#define	LOADCELL4_CMD_MODE_STOP 0x80

#define	LOADCELL4_SET_DEV_ADDR 0x28
	Load Cell 4 device address setting.

Detailed Description

Settings for registers of Load Cell 4 Click driver.

Macro Definition Documentation

◆ LOADCELL4_BRIDGE_RES

#define LOADCELL4_BRIDGE_RES 0x3FFF

◆ LOADCELL4_CMD_MODE_START

#define LOADCELL4_CMD_MODE_START 0xA0

Load Cell 4 command mode.

Command mode setting for Load Cell 4 Click driver.

◆ LOADCELL4_CMD_MODE_STOP

#define LOADCELL4_CMD_MODE_STOP 0x80

◆ LOADCELL4_DATA_NO_DATA

#define LOADCELL4_DATA_NO_DATA 0

◆ LOADCELL4_DATA_OK

#define LOADCELL4_DATA_OK 1

◆ LOADCELL4_DEFAULT_WEIGHT_SCALE_COEFFICIENT

#define LOADCELL4_DEFAULT_WEIGHT_SCALE_COEFFICIENT 0.088495575221

◆ LOADCELL4_DUMMY

#define LOADCELL4_DUMMY 0x0000

Load Cell 4 dummy.

Dummy data for Load Cell 4 Click driver.

◆ LOADCELL4_EEPROM_2ND_ORDER_BRIDGE

#define LOADCELL4_EEPROM_2ND_ORDER_BRIDGE 0x09

◆ LOADCELL4_EEPROM_2ND_ORDER_TEMP

#define LOADCELL4_EEPROM_2ND_ORDER_TEMP 0x0C

◆ LOADCELL4_EEPROM_2ND_ORDER_TEMP_COF_GAIN

#define LOADCELL4_EEPROM_2ND_ORDER_TEMP_COF_GAIN 0x08

◆ LOADCELL4_EEPROM_2ND_ORDER_TEMP_COF_OFFSET

#define LOADCELL4_EEPROM_2ND_ORDER_TEMP_COF_OFFSET 0x07

◆ LOADCELL4_EEPROM_BRIDGE_CONFIG

#define LOADCELL4_EEPROM_BRIDGE_CONFIG 0x0F

◆ LOADCELL4_EEPROM_CONFIG_1

#define LOADCELL4_EEPROM_CONFIG_1 0x01

◆ LOADCELL4_EEPROM_CONFIG_2

#define LOADCELL4_EEPROM_CONFIG_2 0x02

◆ LOADCELL4_EEPROM_GAIN_BRIDGE

#define LOADCELL4_EEPROM_GAIN_BRIDGE 0x04

◆ LOADCELL4_EEPROM_GAINT_TEMP

#define LOADCELL4_EEPROM_GAINT_TEMP 0x0B

◆ LOADCELL4_EEPROM_ID_0

#define LOADCELL4_EEPROM_ID_0 0x00

Load Cell 4 eeprom setting.

Specified eeprom setting of Load Cell 4 Click driver.

◆ LOADCELL4_EEPROM_ID_1

#define LOADCELL4_EEPROM_ID_1 0x0E

◆ LOADCELL4_EEPROM_ID_2

#define LOADCELL4_EEPROM_ID_2 0x13

◆ LOADCELL4_EEPROM_OFFSET_BRIDGE

#define LOADCELL4_EEPROM_OFFSET_BRIDGE 0x03

◆ LOADCELL4_EEPROM_OFFSET_TEMP

#define LOADCELL4_EEPROM_OFFSET_TEMP 0x0A

◆ LOADCELL4_EEPROM_OSC_TRIM

#define LOADCELL4_EEPROM_OSC_TRIM 0x11

◆ LOADCELL4_EEPROM_SIGNATURE

#define LOADCELL4_EEPROM_SIGNATURE 0x12

◆ LOADCELL4_EEPROM_STATUS_READ_READY

#define LOADCELL4_EEPROM_STATUS_READ_READY 0x5A

◆ LOADCELL4_EEPROM_TEMP_COF_GAIN

#define LOADCELL4_EEPROM_TEMP_COF_GAIN 0x05

◆ LOADCELL4_EEPROM_TEMP_COF_OFFSET

#define LOADCELL4_EEPROM_TEMP_COF_OFFSET 0x06

◆ LOADCELL4_EEPROM_TEMP_CONFIG

#define LOADCELL4_EEPROM_TEMP_CONFIG 0x10

◆ LOADCELL4_EEPROM_TEMP_SETL

#define LOADCELL4_EEPROM_TEMP_SETL 0x0D

◆ LOADCELL4_EEPROM_WRITE_CMD

#define LOADCELL4_EEPROM_WRITE_CMD 0x40

◆ LOADCELL4_GET_RESULT_ERROR

#define LOADCELL4_GET_RESULT_ERROR 0

Load Cell 4 description setting.

Specified setting for description of Load Cell 4 Click driver.

◆ LOADCELL4_GET_RESULT_OK

#define LOADCELL4_GET_RESULT_OK 1

◆ LOADCELL4_NUMB_OF_SUM_AVG_100

#define LOADCELL4_NUMB_OF_SUM_AVG_100 100.0

◆ LOADCELL4_NUMB_OF_SUM_AVG_20

#define LOADCELL4_NUMB_OF_SUM_AVG_20 20.00

Load Cell 4 number of average values.

Number of average values used for calibrating for Load Cell 4 Click driver.

◆ LOADCELL4_PWR_OFF

#define LOADCELL4_PWR_OFF 0x00

Load Cell 4 power setting.

Specified power setting for Load Cell 4 Click driver.

◆ LOADCELL4_PWR_ON

#define LOADCELL4_PWR_ON 0x01

◆ LOADCELL4_SET_DEV_ADDR

#define LOADCELL4_SET_DEV_ADDR 0x28

Load Cell 4 device address setting.

Specified setting for device slave address selection of Load Cell 4 Click driver.

◆ LOADCELL4_STATUS_BIT_MASK

#define LOADCELL4_STATUS_BIT_MASK 0x03

◆ LOADCELL4_STATUS_CMD_MODE

#define LOADCELL4_STATUS_CMD_MODE 0x01

◆ LOADCELL4_STATUS_ERROR

#define LOADCELL4_STATUS_ERROR 0x03

◆ LOADCELL4_STATUS_NORMAL

#define LOADCELL4_STATUS_NORMAL 0x00

Load Cell 4 status.

Status settings of Load Cell 4 Click driver.

◆ LOADCELL4_STATUS_STALE_DATA

#define LOADCELL4_STATUS_STALE_DATA 0x02

◆ LOADCELL4_WEIGHT_10000G

#define LOADCELL4_WEIGHT_10000G 10000

◆ LOADCELL4_WEIGHT_1000G

#define LOADCELL4_WEIGHT_1000G 1000

◆ LOADCELL4_WEIGHT_100G

#define LOADCELL4_WEIGHT_100G 100

◆ LOADCELL4_WEIGHT_5000G

#define LOADCELL4_WEIGHT_5000G 5000

◆ LOADCELL4_WEIGHT_500G

#define LOADCELL4_WEIGHT_500G 500

◆ LOADCELL4_WEIGHT_ZERO

#define LOADCELL4_WEIGHT_ZERO 0.000

Load Cell 4 zero weight.

Zero weight setting for Load Cell 4 Click driver.

Macros