lr1110_modem_system_types.h File Reference

System driver types for LR1110 modem. More...

#include <stdbool.h>
#include <stdint.h>

Go to the source code of this file.

Data Structures
struct	lr1110_modem_system_rf_switch_cfg_t
	RF switch configuration parameters. More...

Enumerations
enum	lr1110_modem_system_reg_mode_t { LR1110_MODEM_SYSTEM_REG_MODE_LDO = 0x00 , LR1110_MODEM_SYSTEM_REG_MODE_DCDC = 0x01 }
	Regulator mode values. More...
enum	lr1110_modem_system_rfswitch_cfg_pin_e {   LR1110_MODEM_SYSTEM_RFSW0_HIGH = ( 1 << 0 ) , LR1110_MODEM_SYSTEM_RFSW1_HIGH = ( 1 << 1 ) , LR1110_MODEM_SYSTEM_RFSW2_HIGH = ( 1 << 2 ) , LR1110_MODEM_SYSTEM_RFSW3_HIGH = ( 1 << 3 ) ,   LR1110_MODEM_SYSTEM_RFSW4_HIGH = ( 1 << 4 ) }
	RF switch configuration pin. More...
enum	lr1110_modem_system_lfclk_cfg_t { LR1110_MODEM_SYSTEM_LFCLK_RC = 0x00 , LR1110_MODEM_SYSTEM_LFCLK_XTAL = 0x01 , LR1110_MODEM_SYSTEM_LFCLK_EXT = 0x02 }
	Low Frequency clock configurations values. More...
enum	lr1110_modem_system_tcxo_supply_voltage_t {   LR1110_MODEM_SYSTEM_TCXO_CTRL_1_6V = 0x00 , LR1110_MODEM_SYSTEM_TCXO_CTRL_1_7V = 0x01 , LR1110_MODEM_SYSTEM_TCXO_CTRL_1_8V = 0x02 , LR1110_MODEM_SYSTEM_TCXO_CTRL_2_2V = 0x03 ,   LR1110_MODEM_SYSTEM_TCXO_CTRL_2_4V = 0x04 , LR1110_MODEM_SYSTEM_TCXO_CTRL_2_7V = 0x05 , LR1110_MODEM_SYSTEM_TCXO_CTRL_3_0V = 0x06 , LR1110_MODEM_SYSTEM_TCXO_CTRL_3_3V = 0x07 }
	TCXO supply voltage values. More...

Detailed Description

System driver types for LR1110 modem.

Revised BSD License Copyright Semtech Corporation 2020. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
• Neither the name of the Semtech corporation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SEMTECH CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Enumeration Type Documentation

lr1110_modem_system_lfclk_cfg_t

enum lr1110_modem_system_lfclk_cfg_t

Low Frequency clock configurations values.

Enumerator
LR1110_MODEM_SYSTEM_LFCLK_RC	(Default)
LR1110_MODEM_SYSTEM_LFCLK_XTAL
LR1110_MODEM_SYSTEM_LFCLK_EXT

lr1110_modem_system_reg_mode_t

enum lr1110_modem_system_reg_mode_t

Regulator mode values.

Enumerator
LR1110_MODEM_SYSTEM_REG_MODE_LDO	(Default)
LR1110_MODEM_SYSTEM_REG_MODE_DCDC

lr1110_modem_system_rfswitch_cfg_pin_e

enum lr1110_modem_system_rfswitch_cfg_pin_e

RF switch configuration pin.

Enumerator
LR1110_MODEM_SYSTEM_RFSW0_HIGH
LR1110_MODEM_SYSTEM_RFSW1_HIGH
LR1110_MODEM_SYSTEM_RFSW2_HIGH
LR1110_MODEM_SYSTEM_RFSW3_HIGH
LR1110_MODEM_SYSTEM_RFSW4_HIGH

lr1110_modem_system_tcxo_supply_voltage_t

enum lr1110_modem_system_tcxo_supply_voltage_t

TCXO supply voltage values.

Enumerator
LR1110_MODEM_SYSTEM_TCXO_CTRL_1_6V	Supply voltage = 1.6v.
LR1110_MODEM_SYSTEM_TCXO_CTRL_1_7V	Supply voltage = 1.7v.
LR1110_MODEM_SYSTEM_TCXO_CTRL_1_8V	Supply voltage = 1.8v.
LR1110_MODEM_SYSTEM_TCXO_CTRL_2_2V	Supply voltage = 2.2v.
LR1110_MODEM_SYSTEM_TCXO_CTRL_2_4V	Supply voltage = 2.4v.
LR1110_MODEM_SYSTEM_TCXO_CTRL_2_7V	Supply voltage = 2.7v.
LR1110_MODEM_SYSTEM_TCXO_CTRL_3_0V	Supply voltage = 3.0v.
LR1110_MODEM_SYSTEM_TCXO_CTRL_3_3V	Supply voltage = 3.3v.