Settings for registers of Magneto 10 Click driver. More...

Macros
#define	MAGNETO10_MODE_IDLE 0x00
	Magneto 10 operating mode values.

#define	MAGNETO10_MODE_SINGLE_MEAS 0x01

#define	MAGNETO10_MODE_CONT_MEAS_10HZ 0x02

#define	MAGNETO10_MODE_CONT_MEAS_20HZ 0x03

#define	MAGNETO10_MODE_CONT_MEAS_50HZ 0x04

#define	MAGNETO10_MODE_CONT_MEAS_100HZ 0x05

#define	MAGNETO10_MODE_SELF_TEST 0x06

#define	MAGNETO10_MODE_CONT_MEAS_200HZ 0x0A

#define	MAGNETO10_MODE_CONT_MEAS_500HZ 0x0B

#define	MAGNETO10_MODE_CONT_MEAS_800HZ 0x0C

#define	MAGNETO10_MODE_CONT_MEAS_1400HZ 0x0D

#define	MAGNETO10_MODE_POWER_DOWN 0x0F

#define	MAGNETO10_COMPANY_ID 0x98
	Magneto 10 identification values.

#define	MAGNETO10_DEVICE_ID 0xBA

#define	MAGNETO10_RESET 0x06
	Magneto 10 reset value.

#define	MAGNETO10_STAT1_RT 0x08
	Magneto 10 status values.

#define	MAGNETO10_STAT1_DRDY 0x01

#define	MAGNETO10_STAT2_DOR 0x02

#define	MAGNETO10_STAT2_HOVF 0x01

#define	MAGNETO10_TEMPERATURE_RES 50.0
	Magneto 10 temperature sensor macros.

#define	MAGNETO10_TEMPERATURE_ENABLE 0x01

#define	MAGNETO10_TEMPERATURE_DISABLE 0x00

#define	MAGNETO10_TEMPERATURE_EN_MASK 0x20

#define	MAGNETO10_MAG_FLUX_RESOLUTION 0.15
	Magneto 10 magnetic flux resolution.

#define	MAGNETO10_SET_DEV_ADDR 0x0C
	Magneto 10 device address setting.

Detailed Description

Settings for registers of Magneto 10 Click driver.

Macro Definition Documentation

◆ MAGNETO10_COMPANY_ID

#define MAGNETO10_COMPANY_ID 0x98

Magneto 10 identification values.

Specified identification values of Magneto 10 Click driver.

◆ MAGNETO10_DEVICE_ID

#define MAGNETO10_DEVICE_ID 0xBA

◆ MAGNETO10_MAG_FLUX_RESOLUTION

#define MAGNETO10_MAG_FLUX_RESOLUTION 0.15

Magneto 10 magnetic flux resolution.

Specified resolution for magnetic flux of Magneto 10 Click driver.

◆ MAGNETO10_MODE_CONT_MEAS_100HZ

#define MAGNETO10_MODE_CONT_MEAS_100HZ 0x05

◆ MAGNETO10_MODE_CONT_MEAS_10HZ

#define MAGNETO10_MODE_CONT_MEAS_10HZ 0x02

◆ MAGNETO10_MODE_CONT_MEAS_1400HZ

#define MAGNETO10_MODE_CONT_MEAS_1400HZ 0x0D

◆ MAGNETO10_MODE_CONT_MEAS_200HZ

#define MAGNETO10_MODE_CONT_MEAS_200HZ 0x0A

◆ MAGNETO10_MODE_CONT_MEAS_20HZ

#define MAGNETO10_MODE_CONT_MEAS_20HZ 0x03

◆ MAGNETO10_MODE_CONT_MEAS_500HZ

#define MAGNETO10_MODE_CONT_MEAS_500HZ 0x0B

◆ MAGNETO10_MODE_CONT_MEAS_50HZ

#define MAGNETO10_MODE_CONT_MEAS_50HZ 0x04

◆ MAGNETO10_MODE_CONT_MEAS_800HZ

#define MAGNETO10_MODE_CONT_MEAS_800HZ 0x0C

◆ MAGNETO10_MODE_IDLE

#define MAGNETO10_MODE_IDLE 0x00

Magneto 10 operating mode values.

Specified values for operating modes of Magneto 10 Click driver.

◆ MAGNETO10_MODE_POWER_DOWN

#define MAGNETO10_MODE_POWER_DOWN 0x0F

◆ MAGNETO10_MODE_SELF_TEST

#define MAGNETO10_MODE_SELF_TEST 0x06

◆ MAGNETO10_MODE_SINGLE_MEAS

#define MAGNETO10_MODE_SINGLE_MEAS 0x01

◆ MAGNETO10_RESET

#define MAGNETO10_RESET 0x06

Magneto 10 reset value.

Specified reset value of Magneto 10 Click driver.

◆ MAGNETO10_SET_DEV_ADDR

#define MAGNETO10_SET_DEV_ADDR 0x0C

Magneto 10 device address setting.

Specified setting for device slave address selection of Magneto 10 Click driver.

◆ MAGNETO10_STAT1_DRDY

#define MAGNETO10_STAT1_DRDY 0x01

◆ MAGNETO10_STAT1_RT

#define MAGNETO10_STAT1_RT 0x08

Magneto 10 status values.

Specified status values of Magneto 10 Click driver.

◆ MAGNETO10_STAT2_DOR

#define MAGNETO10_STAT2_DOR 0x02

◆ MAGNETO10_STAT2_HOVF

#define MAGNETO10_STAT2_HOVF 0x01

◆ MAGNETO10_TEMPERATURE_DISABLE

#define MAGNETO10_TEMPERATURE_DISABLE 0x00

◆ MAGNETO10_TEMPERATURE_EN_MASK

#define MAGNETO10_TEMPERATURE_EN_MASK 0x20

◆ MAGNETO10_TEMPERATURE_ENABLE

#define MAGNETO10_TEMPERATURE_ENABLE 0x01

◆ MAGNETO10_TEMPERATURE_RES

#define MAGNETO10_TEMPERATURE_RES 50.0

Magneto 10 temperature sensor macros.

Specified macros for temperature sensor of Magneto 10 Click driver.

Macros