Public function

Functions
void	mic33153_cfg_setup (mic33153_cfg_t *cfg)
	Config Object Initialization function.
MIC33153_RETVAL	mic33153_init (mic33153_t *ctx, mic33153_cfg_t *cfg)
	Initialization function.
void	mic33153_generic_transfer (mic33153_t *ctx, uint8_t *wr_buf, uint16_t wr_len, uint8_t *rd_buf, uint16_t rd_len)
	Generic transfer function.
void	mic33153_write_dac (mic33153_t *ctx, const uint16_t value_dac)
	Write DAC function.
void	mic33153_enable_out (mic33153_t *ctx, uint8_t state)
	Out enable function.
uint8_t	mic33153_check_power_good (mic33153_t *ctx)
	Power Good check function.

Detailed Description

Function Documentation

mic33153_cfg_setup()

void mic33153_cfg_setup

(

mic33153_cfg_t *

cfg

)

Config Object Initialization function.

Parameters

cfg	Click configuration structure.

@description This function initializes click configuration structure to init state.

Note

All used pins will be set to unconnected state.

mic33153_check_power_good()

uint8_t mic33153_check_power_good

(

mic33153_t *

ctx

)

Power Good check function.

Parameters

ctx	Click object.
state	0 - disable output voltage, 1 - enable output voltage.

@description This function hecks state of PG (INT) pin. If state is 1 that means that output voltage is above 92% of its steady state voltage. If state is 0 that means that output voltage is below 86% of its steady state voltage.

mic33153_enable_out()

void mic33153_enable_out	(	mic33153_t *	ctx,
		uint8_t	state )

Out enable function.

Parameters

ctx	Click object.
state	0 - disable output voltage, 1 - enable output voltage.

@description This function enables or disables output voltage depending on the state value.

mic33153_generic_transfer()

void mic33153_generic_transfer	(	mic33153_t *	ctx,
		uint8_t *	wr_buf,
		uint16_t	wr_len,
		uint8_t *	rd_buf,
		uint16_t	rd_len )

Generic transfer function.

Parameters

ctx	Click object.
wr_buf	Write data buffer
wr_len	Number of byte in write data buffer
rd_buf	Read data buffer
rd_len	Number of byte in read data buffer

@description Generic SPI transfer, for sending and receiving packages

mic33153_init()

MIC33153_RETVAL mic33153_init	(	mic33153_t *	ctx,
		mic33153_cfg_t *	cfg )

Initialization function.

Parameters

mic33153	Click object.
cfg	Click configuration structure.

@description This function initializes all necessary pins and peripherals used for this click.

mic33153_write_dac()

void mic33153_write_dac	(	mic33153_t *	ctx,
		const uint16_t	value_dac )

Write DAC function.

Parameters

ctx	Click object.
value_dac	Value of DAC to be writen.

@description This function writes 12-bit value to DAC and that causes that output voltage be seted on determined value.