Settings for registers of NB IoT 5 Click driver. More...

Macros
#define	NBIOT5_CMD_AT "AT"
	NB IoT 5 control commands.

#define	NBIOT5_CMD_CFUN "AT+CFUN"

#define	NBIOT5_CMD_CEREG "AT+CEREG"

#define	NBIOT5_CMD_CGDCONT "AT+CGDCONT"

#define	NBIOT5_CMD_CSQ "AT+CSQ"

#define	NBIOT5_CMD_COPS "AT+COPS"

#define	NBIOT5_CMD_CMGS "AT+CMGS"

#define	NBIOT5_CMD_CMGF "AT+CMGF"

#define	NBIOT5_CMD_ESOC "AT+ESOC"

#define	NBIOT5_CMD_ESOCON "AT+ESOCON"

#define	NBIOT5_CMD_ESOSEND "AT+ESOSEND"

#define	NBIOT5_CMD_ESOCL "AT+ESOCL"

#define	NBIOT5_RSP_OK "OK"
	NB IoT 5 device response for AT commands.

#define	NBIOT5_RSP_ERROR "ERROR"

#define	NBIOT5_RX_DRV_BUFFER_SIZE 256
	NB IoT 5 driver buffer size.

#define	NBIOT5_TX_DRV_BUFFER_SIZE 256

Detailed Description

Settings for registers of NB IoT 5 Click driver.

Macro Definition Documentation

◆ NBIOT5_CMD_AT

#define NBIOT5_CMD_AT "AT"

NB IoT 5 control commands.

Specified setting for control commands of NB IoT 5 Click driver.

◆ NBIOT5_CMD_CEREG

#define NBIOT5_CMD_CEREG "AT+CEREG"

◆ NBIOT5_CMD_CFUN

#define NBIOT5_CMD_CFUN "AT+CFUN"

◆ NBIOT5_CMD_CGDCONT

#define NBIOT5_CMD_CGDCONT "AT+CGDCONT"

◆ NBIOT5_CMD_CMGF

#define NBIOT5_CMD_CMGF "AT+CMGF"

◆ NBIOT5_CMD_CMGS

#define NBIOT5_CMD_CMGS "AT+CMGS"

◆ NBIOT5_CMD_COPS

#define NBIOT5_CMD_COPS "AT+COPS"

◆ NBIOT5_CMD_CSQ

#define NBIOT5_CMD_CSQ "AT+CSQ"

◆ NBIOT5_CMD_ESOC

#define NBIOT5_CMD_ESOC "AT+ESOC"

◆ NBIOT5_CMD_ESOCL

#define NBIOT5_CMD_ESOCL "AT+ESOCL"

◆ NBIOT5_CMD_ESOCON

#define NBIOT5_CMD_ESOCON "AT+ESOCON"

◆ NBIOT5_CMD_ESOSEND

#define NBIOT5_CMD_ESOSEND "AT+ESOSEND"

◆ NBIOT5_RSP_ERROR

#define NBIOT5_RSP_ERROR "ERROR"

◆ NBIOT5_RSP_OK

#define NBIOT5_RSP_OK "OK"

NB IoT 5 device response for AT commands.

Device response after commands.

◆ NBIOT5_RX_DRV_BUFFER_SIZE

#define NBIOT5_RX_DRV_BUFFER_SIZE 256

NB IoT 5 driver buffer size.

Specified size of driver ring buffer.

Note: Increase buffer size if needed.

◆ NBIOT5_TX_DRV_BUFFER_SIZE

#define NBIOT5_TX_DRV_BUFFER_SIZE 256

Macros