Settings for registers of OBDII Click driver. More...

Macros
#define	OBDII_CMD_FIRMWARE_VERSION "ATI"
	OBDII control commands.

#define	OBDII_CMD_DISABLE_ECHO "ATE0"

#define	OBDII_CMD_ENABLE_ECHO "ATE1"

#define	OBDII_CMD_AUTO_PROTOCOL "ATSP0"

#define	OBDII_CMD_SPACES_OFF "ATS0"

#define	OBDII_CMD_RESET_DEFAULT "ATD"

#define	OBDII_CMD_RESET_DEVICE "ATZ"

#define	OBDII_CMD_GET_CURRENT_RPM "010C"

#define	OBDII_CMD_GET_CURRENT_SPEED "010D"

#define	OBDII_RSP_OK "OK"
	OBDII device response for AT commands.

#define	OBDII_RSP_UNKNOWN_CMD "ERROR"

#define	OBDII_RSP_PROMPT ">"

#define	OBDII_RSP_CURRENT_RPM "410C"

#define	OBDII_RSP_CURRENT_SPEED "410D"

#define	OBDII_TX_DRV_BUFFER_SIZE 100
	OBDII driver buffer size.

#define	OBDII_RX_DRV_BUFFER_SIZE 300

Detailed Description

Settings for registers of OBDII Click driver.

Macro Definition Documentation

◆ OBDII_CMD_AUTO_PROTOCOL

#define OBDII_CMD_AUTO_PROTOCOL "ATSP0"

◆ OBDII_CMD_DISABLE_ECHO

#define OBDII_CMD_DISABLE_ECHO "ATE0"

◆ OBDII_CMD_ENABLE_ECHO

#define OBDII_CMD_ENABLE_ECHO "ATE1"

◆ OBDII_CMD_FIRMWARE_VERSION

#define OBDII_CMD_FIRMWARE_VERSION "ATI"

OBDII control commands.

Specified setting for control commands of OBDII Click driver.

◆ OBDII_CMD_GET_CURRENT_RPM

#define OBDII_CMD_GET_CURRENT_RPM "010C"

◆ OBDII_CMD_GET_CURRENT_SPEED

#define OBDII_CMD_GET_CURRENT_SPEED "010D"

◆ OBDII_CMD_RESET_DEFAULT

#define OBDII_CMD_RESET_DEFAULT "ATD"

◆ OBDII_CMD_RESET_DEVICE

#define OBDII_CMD_RESET_DEVICE "ATZ"

◆ OBDII_CMD_SPACES_OFF

#define OBDII_CMD_SPACES_OFF "ATS0"

◆ OBDII_RSP_CURRENT_RPM

#define OBDII_RSP_CURRENT_RPM "410C"

◆ OBDII_RSP_CURRENT_SPEED

#define OBDII_RSP_CURRENT_SPEED "410D"

◆ OBDII_RSP_OK

#define OBDII_RSP_OK "OK"

OBDII device response for AT commands.

Device response after commands.

◆ OBDII_RSP_PROMPT

#define OBDII_RSP_PROMPT ">"

◆ OBDII_RSP_UNKNOWN_CMD

#define OBDII_RSP_UNKNOWN_CMD "ERROR"

◆ OBDII_RX_DRV_BUFFER_SIZE

#define OBDII_RX_DRV_BUFFER_SIZE 300

◆ OBDII_TX_DRV_BUFFER_SIZE

#define OBDII_TX_DRV_BUFFER_SIZE 100

OBDII driver buffer size.

Specified size of driver ring buffer.

Note: Increase buffer size if needed.

Macros