Settings for registers of PHT Click driver. More...

Macros
#define	PHT_RH_CMD_RESET 0xFE
	PHT Command for relative humidity.

#define	PHT_RH_CMD_WRITE_USER_REG 0xE6

#define	PHT_RH_CMD_READ_USER_REG 0xE7

#define	PHT_RH_MEASURE_RH_HOLD 0xE5

#define	PHT_RH_MEASURE_RH_NO_HOLD 0xF5

#define	PHT_PT_CMD_RESET 0x1E
	PHT Command for pressure and temperature.

#define	PHT_PT_CMD_ADC_READ 0x00

#define	PHT_PT_CMD_PROM_READ_P_T_START 0xA0

#define	PHT_PT_CMD_PROM_READ_P_T_END 0xAE

#define	PHT_PT_CMD_RATIO_256 0x00

#define	PHT_PT_CMD_RATIO_512 0x01

#define	PHT_PT_CMD_RATIO_1024 0x02

#define	PHT_PT_CMD_RATIO_2048 0x03

#define	PHT_PT_CMD_RATIO_4096 0x04

#define	PHT_PT_CMD_RATIO_8192 0x05

#define	PHT_PT_MANUFACTURER_RESERVED 0x00
	PHT coefficient for pressure and temperature.

#define	PHT_PT_C1_SENS 0x01

#define	PHT_PT_C2_OFF 0x02

#define	PHT_PT_C3_TCS 0x03

#define	PHT_PT_C4_TCO 0x04

#define	PHT_PT_C5_TREF 0x05

#define	PHT_PT_C6_TEMPSENS 0x06

#define	PHT_PT_CRC 0x07

#define	PHT_SENSOR_TYPE_RH 0x00
	PHT Select output data.

#define	PHT_SENSOR_TYPE_PT 0x01

#define	PHT_I2C_SLAVE_ADDR_RH 0x40
	PHT device address setting.

#define	PHT_I2C_SLAVE_ADDR_P_AND_T 0x76

Detailed Description

Settings for registers of PHT Click driver.

Macro Definition Documentation

◆ PHT_I2C_SLAVE_ADDR_P_AND_T

#define PHT_I2C_SLAVE_ADDR_P_AND_T 0x76

◆ PHT_I2C_SLAVE_ADDR_RH

#define PHT_I2C_SLAVE_ADDR_RH 0x40

PHT device address setting.

Specified setting for device slave address selection of PHT Click driver.

◆ PHT_PT_C1_SENS

#define PHT_PT_C1_SENS 0x01

◆ PHT_PT_C2_OFF

#define PHT_PT_C2_OFF 0x02

◆ PHT_PT_C3_TCS

#define PHT_PT_C3_TCS 0x03

◆ PHT_PT_C4_TCO

#define PHT_PT_C4_TCO 0x04

◆ PHT_PT_C5_TREF

#define PHT_PT_C5_TREF 0x05

◆ PHT_PT_C6_TEMPSENS

#define PHT_PT_C6_TEMPSENS 0x06

◆ PHT_PT_CMD_ADC_READ

#define PHT_PT_CMD_ADC_READ 0x00

◆ PHT_PT_CMD_PROM_READ_P_T_END

#define PHT_PT_CMD_PROM_READ_P_T_END 0xAE

◆ PHT_PT_CMD_PROM_READ_P_T_START

#define PHT_PT_CMD_PROM_READ_P_T_START 0xA0

◆ PHT_PT_CMD_RATIO_1024

#define PHT_PT_CMD_RATIO_1024 0x02

◆ PHT_PT_CMD_RATIO_2048

#define PHT_PT_CMD_RATIO_2048 0x03

◆ PHT_PT_CMD_RATIO_256

#define PHT_PT_CMD_RATIO_256 0x00

◆ PHT_PT_CMD_RATIO_4096

#define PHT_PT_CMD_RATIO_4096 0x04

◆ PHT_PT_CMD_RATIO_512

#define PHT_PT_CMD_RATIO_512 0x01

◆ PHT_PT_CMD_RATIO_8192

#define PHT_PT_CMD_RATIO_8192 0x05

◆ PHT_PT_CMD_RESET

#define PHT_PT_CMD_RESET 0x1E

PHT Command for pressure and temperature.

Specified commands for pressure and temperature of PHT Click driver.

◆ PHT_PT_CRC

#define PHT_PT_CRC 0x07

◆ PHT_PT_MANUFACTURER_RESERVED

#define PHT_PT_MANUFACTURER_RESERVED 0x00

PHT coefficient for pressure and temperature.

Specified coefficient for calculation pressure and temperature of PHT Click driver.

◆ PHT_RH_CMD_READ_USER_REG

#define PHT_RH_CMD_READ_USER_REG 0xE7

◆ PHT_RH_CMD_RESET

#define PHT_RH_CMD_RESET 0xFE

PHT Command for relative humidity.

Specified commands for relative humidity of PHT Click driver.

◆ PHT_RH_CMD_WRITE_USER_REG

#define PHT_RH_CMD_WRITE_USER_REG 0xE6

◆ PHT_RH_MEASURE_RH_HOLD

#define PHT_RH_MEASURE_RH_HOLD 0xE5

◆ PHT_RH_MEASURE_RH_NO_HOLD

#define PHT_RH_MEASURE_RH_NO_HOLD 0xF5

◆ PHT_SENSOR_TYPE_PT

#define PHT_SENSOR_TYPE_PT 0x01

◆ PHT_SENSOR_TYPE_RH

#define PHT_SENSOR_TYPE_RH 0x00

PHT Select output data.

Select output data of PHT Click driver.

Macros