ReRAM 2 Registers Settings

Settings for registers of ReRAM 2 Click driver. More...

Macros
#define	RERAM2_DEVICE_ID   0x047FAA03
	ReRAM 2 Device ID values.
#define	RERAM2_MANUFACTURER_ID   0x04
#define	RERAM2_CONTINUATION_CODE   0x7F
#define	RERAM2_PRODUCT_ID   0xAA03
#define	RERAM2_HOLD_ENABLE   0x00
	ReRAM 2 Hold pin state.
#define	RERAM2_HOLD_DISABLE   0x01
#define	RERAM2_WP_ENABLE   0x00
	ReRAM 2 Write protect pin state.
#define	RERAM2_WP_DISABLE   0x01
#define	RERAM2_SET_DATA_SAMPLE_EDGE   SET_SPI_DATA_SAMPLE_EDGE
	Data sample selection.
#define	RERAM2_SET_DATA_SAMPLE_MIDDLE   SET_SPI_DATA_SAMPLE_MIDDLE

Detailed Description

Settings for registers of ReRAM 2 Click driver.

Macro Definition Documentation

RERAM2_CONTINUATION_CODE

#define RERAM2_CONTINUATION_CODE   0x7F

RERAM2_DEVICE_ID

#define RERAM2_DEVICE_ID   0x047FAA03

ReRAM 2 Device ID values.

Specified Device ID values for description of ReRAM 2 Click driver.

RERAM2_HOLD_DISABLE

#define RERAM2_HOLD_DISABLE   0x01

RERAM2_HOLD_ENABLE

#define RERAM2_HOLD_ENABLE   0x00

ReRAM 2 Hold pin state.

Specified Hold pin state for description of ReRAM 2 Click driver.

RERAM2_MANUFACTURER_ID

#define RERAM2_MANUFACTURER_ID   0x04

RERAM2_PRODUCT_ID

#define RERAM2_PRODUCT_ID   0xAA03

RERAM2_SET_DATA_SAMPLE_EDGE

#define RERAM2_SET_DATA_SAMPLE_EDGE   SET_SPI_DATA_SAMPLE_EDGE

Data sample selection.

This macro sets data samples for SPI modules.

Note

Available only on Microchip PIC family devices. This macro will set data sampling for all SPI modules on MCU. Can be overwritten with reram2_init which will set SET_SPI_DATA_SAMPLE_MIDDLE by default on the mapped mikrobus.

RERAM2_SET_DATA_SAMPLE_MIDDLE

#define RERAM2_SET_DATA_SAMPLE_MIDDLE   SET_SPI_DATA_SAMPLE_MIDDLE

RERAM2_WP_DISABLE

#define RERAM2_WP_DISABLE   0x01

RERAM2_WP_ENABLE

#define RERAM2_WP_ENABLE   0x00

ReRAM 2 Write protect pin state.

Specified Write protect pin state for description of ReRAM 2 Click driver.