Smart Buck 4 Click example. More...

#include "board.h"
#include "log.h"
#include "smartbuck4.h"

Macros
#define	SMARTBUCK4_MIN_VOLTAGE 600

#define	SMARTBUCK4_STEP 25

Functions
void	application_init (void)

void	application_task (void)

int	main (void)

Detailed Description

Smart Buck 4 Click example.

Description

This example demonstrates the use of the Smart Buck 4 Click board. This driver provides functions for device configurations and for the setting of the output voltage.

The demo application is composed of two sections :

Application Init

Initialization of I2C module and log UART. After initializing the driver, the default configuration is executed and the outputs are turned off.

Application Task

Changes the output voltage every 5 seconds, starting from 0.6 V to 3.3V/3.7V
depending on the input voltage.

Author: Stefan Ilic

Macro Definition Documentation

◆ SMARTBUCK4_MIN_VOLTAGE

#define SMARTBUCK4_MIN_VOLTAGE 600

◆ SMARTBUCK4_STEP

#define SMARTBUCK4_STEP 25

Function Documentation

◆ application_init()

void application_init ( void )

< Logger config object.

< Click config object.

Logger initialization. Default baud rate: 115200 Default log level: LOG_LEVEL_DEBUG

Note: If USB_UART_RX and USB_UART_TX are defined as HAL_PIN_NC, you will need to define them manually for log to work. See LOG_MAP_USB_UART macro definition for detailed explanation.

◆ application_task()

void application_task ( void )

◆ main()

int main ( void )

Macros

Functions