solidswitch3 2.0.0.0
|
This file contains API for SolidSwitch 3 Click Driver. More...
#include "drv_digital_out.h"
#include "drv_digital_in.h"
#include "drv_spi_master.h"
#include "spi_specifics.h"
Go to the source code of this file.
Data Structures | |
struct | solidswitch3_t |
SolidSwitch 3 Click context object. More... | |
struct | solidswitch3_cfg_t |
SolidSwitch 3 Click configuration object. More... | |
Macros | |
#define | SOLIDSWITCH3_CH_OUT1 0x01 |
SolidSwitch3 channel selection. | |
#define | SOLIDSWITCH3_CH_OUT2 0x02 |
#define | SOLIDSWITCH3_CH_OUT3 0x04 |
#define | SOLIDSWITCH3_CH_OUT4 0x08 |
#define | SOLIDSWITCH3_CH_OUT5 0x10 |
#define | SOLIDSWITCH3_CH_OUT6 0x20 |
#define | SOLIDSWITCH3_CH_OUT7 0x40 |
#define | SOLIDSWITCH3_CH_OUT8 0x80 |
#define | SOLIDSWITCH3_ALL_CHANNELS 0xFF |
#define | SOLIDSWITCH3_DIR_MODE_SPI 0 |
SolidSwitch 3 DIR mode settings. | |
#define | SOLIDSWITCH3_DIR_MODE_GPIO 1 |
#define | SOLIDSWITCH3_OUT_DISABLE 0u |
SolidSwitch 3 output settings. | |
#define | SOLIDSWITCH3_OUT_IN_TERMINAL 1u |
#define | SOLIDSWITCH3_OUT_ENABLE 2u |
#define | SOLIDSWITCH3_OUT_BITS_MASK 3u |
#define | SOLIDSWITCH3_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE |
Data sample selection. | |
#define | SOLIDSWITCH3_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE |
#define | SOLIDSWITCH3_MAP_MIKROBUS(cfg, mikrobus) |
MikroBUS pin mapping. | |
Enumerations | |
enum | solidswitch3_return_value_t { SOLIDSWITCH3_OK = 0 , SOLIDSWITCH3_ERROR = -1 } |
SolidSwitch 3 Click return value data. More... | |
Functions | |
void | solidswitch3_cfg_setup (solidswitch3_cfg_t *cfg) |
SolidSwitch 3 configuration object setup function. | |
err_t | solidswitch3_init (solidswitch3_t *ctx, solidswitch3_cfg_t *cfg) |
SolidSwitch 3 initialization function. | |
err_t | solidswitch3_default_cfg (solidswitch3_t *ctx) |
SolidSwitch 3 default configuration function. | |
err_t | solidswitch3_write_data (solidswitch3_t *ctx, uint16_t data_in) |
SolidSwitch 3 write data function. | |
err_t | solidswitch3_enable_output (solidswitch3_t *ctx, uint8_t channel) |
SolidSwitch 3 enable output function. | |
err_t | solidswitch3_disable_output (solidswitch3_t *ctx, uint8_t channel) |
SolidSwitch 3 disable output function. | |
void | solidswitch3_reset (solidswitch3_t *ctx) |
SolidSwitch 3 reset function. | |
void | solidswitch3_set_dir_mode (solidswitch3_t *ctx, uint8_t dir_mode) |
SolidSwitch 3 set dir mode function. | |
void | solidswitch3_set_rst_pin (solidswitch3_t *ctx, uint8_t state) |
SolidSwitch 3 set rst pin function. | |
void | solidswitch3_set_in1_pin (solidswitch3_t *ctx, uint8_t state) |
SolidSwitch 3 set in1 pin function. | |
void | solidswitch3_set_in2_pin (solidswitch3_t *ctx, uint8_t state) |
SolidSwitch 3 set in2 pin function. | |
This file contains API for SolidSwitch 3 Click Driver.