spiisolator6.h

Go to the documentation of this file.

/****************************************************************************
** Copyright (C) 2020 MikroElektronika d.o.o.
** Contact: https://www.mikroe.com/contact
**
** Permission is hereby granted, free of charge, to any person obtaining a copy
** of this software and associated documentation files (the "Software"), to deal
** in the Software without restriction, including without limitation the rights
** to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
** copies of the Software, and to permit persons to whom the Software is
** furnished to do so, subject to the following conditions:
** The above copyright notice and this permission notice shall be
** included in all copies or substantial portions of the Software.
**
** THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
** OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
** DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT
** OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
**  USE OR OTHER DEALINGS IN THE SOFTWARE.
****************************************************************************/
 
#ifndef SPIISOLATOR6_H
#define SPIISOLATOR6_H
 
#ifdef __cplusplus
extern "C"{
#endif
 
#ifdef PREINIT_SUPPORTED
#include "preinit.h"
#endif
 
#ifdef MikroCCoreVersion
    #if MikroCCoreVersion >= 1
        #include "delays.h"
    #endif
#endif
 
#include "drv_digital_out.h"
#include "drv_digital_in.h"
#include "drv_spi_master.h"
#include "spi_specifics.h"
 
#define SPIISOLATOR6_SPI_CLOCK_SPEED            100000
#define SPIISOLATOR6_SPI_MODE                   SPI_MASTER_MODE_0
#define SPIISOLATOR6_SPI_CS_POLARITY            SPI_MASTER_CHIP_SELECT_POLARITY_ACTIVE_LOW
#define SPIISOLATOR6_SPI_DUMMY_BYTE             0x00
 
#define SPIISOLATOR6_SET_DATA_SAMPLE_EDGE       SET_SPI_DATA_SAMPLE_EDGE
#define SPIISOLATOR6_SET_DATA_SAMPLE_MIDDLE     SET_SPI_DATA_SAMPLE_MIDDLE
 
 // spiisolator6_set
 
#define SPIISOLATOR6_MAP_MIKROBUS( cfg, mikrobus ) \
    cfg.miso = MIKROBUS( mikrobus, MIKROBUS_MISO ); \
    cfg.mosi = MIKROBUS( mikrobus, MIKROBUS_MOSI ); \
    cfg.sck  = MIKROBUS( mikrobus, MIKROBUS_SCK ); \
    cfg.cs   = MIKROBUS( mikrobus, MIKROBUS_CS );
 
 // spiisolator6_map
 // spiisolator6
 
typedef struct
{
    // Modules
    spi_master_t spi;           
    pin_name_t   chip_select;   
} spiisolator6_t;
 
typedef struct
{
    // Communication gpio pins
    pin_name_t miso;            
    pin_name_t mosi;            
    pin_name_t sck;             
    pin_name_t cs;              
    // static variable
    uint32_t                           spi_speed;   
    spi_master_mode_t                  spi_mode;    
    spi_master_chip_select_polarity_t  cs_polarity; 
} spiisolator6_cfg_t;
 
typedef enum
{
    SPIISOLATOR6_OK = 0,
    SPIISOLATOR6_ERROR = -1
 
} spiisolator6_return_value_t;
 
void spiisolator6_cfg_setup ( spiisolator6_cfg_t *cfg );
 
err_t spiisolator6_init ( spiisolator6_t *ctx, spiisolator6_cfg_t *cfg );
 
err_t spiisolator6_generic_write ( spiisolator6_t *ctx, uint8_t *data_in, uint8_t in_len );
 
err_t spiisolator6_generic_read ( spiisolator6_t *ctx, uint8_t *data_in, uint8_t in_len, uint8_t *data_out, uint8_t out_len );
 
#ifdef __cplusplus
}
#endif
#endif // SPIISOLATOR6_H
 
 // spiisolator6
 
// ------------------------------------------------------------------------ END