Stepper 18 Registers Settings

Settings for registers of Stepper 18 Click driver. More...

Macros
#define	STEPPER18_STEP_RES_FULL   1
	Stepper 18 device step resolution.
#define	STEPPER18_STEP_RES_HALF   2
#define	STEPPER18_STEP_RES_QUARTER   4
#define	STEPPER18_STEP_RES_1div8   8
#define	STEPPER18_STEP_RES_1div16   16
#define	STEPPER18_STEP_RES_1div32   32
#define	STEPPER18_STEP_RES_1div64   64
#define	STEPPER18_STEP_RES_1div128   128
#define	STEPPER18_STEP_RES_1div256   256
#define	STEPPER18_SPEED_VERY_SLOW   1
	Stepper 18 device speed settings.
#define	STEPPER18_SPEED_SLOW   2
#define	STEPPER18_SPEED_MEDIUM   3
#define	STEPPER18_SPEED_FAST   4
#define	STEPPER18_SPEED_VERY_FAST   5
#define	STEPPER18_SET_DEV_ADDR   0x60
	Stepper 18 device address setting.

Detailed Description

Settings for registers of Stepper 18 Click driver.

Any initialization code needed for MCU to function properly. Do not remove this line or clock might not be set correctly.

Macro Definition Documentation

STEPPER18_SET_DEV_ADDR

#define STEPPER18_SET_DEV_ADDR   0x60

Stepper 18 device address setting.

Specified setting for device slave address selection of Stepper 18 Click driver.

STEPPER18_SPEED_FAST

#define STEPPER18_SPEED_FAST   4

STEPPER18_SPEED_MEDIUM

#define STEPPER18_SPEED_MEDIUM   3

STEPPER18_SPEED_SLOW

#define STEPPER18_SPEED_SLOW   2

STEPPER18_SPEED_VERY_FAST

#define STEPPER18_SPEED_VERY_FAST   5

STEPPER18_SPEED_VERY_SLOW

#define STEPPER18_SPEED_VERY_SLOW   1

Stepper 18 device speed settings.

Specified setting for rotation speed.

STEPPER18_STEP_RES_1div128

#define STEPPER18_STEP_RES_1div128   128

STEPPER18_STEP_RES_1div16

#define STEPPER18_STEP_RES_1div16   16

STEPPER18_STEP_RES_1div256

#define STEPPER18_STEP_RES_1div256   256

STEPPER18_STEP_RES_1div32

#define STEPPER18_STEP_RES_1div32   32

STEPPER18_STEP_RES_1div64

#define STEPPER18_STEP_RES_1div64   64

STEPPER18_STEP_RES_1div8

#define STEPPER18_STEP_RES_1div8   8

STEPPER18_STEP_RES_FULL

#define STEPPER18_STEP_RES_FULL   1

Stepper 18 device step resolution.

Specified setting for referencing step resolution.

STEPPER18_STEP_RES_HALF

#define STEPPER18_STEP_RES_HALF   2

STEPPER18_STEP_RES_QUARTER

#define STEPPER18_STEP_RES_QUARTER   4