Settings for registers of TempHum 21 Click driver. More...

Macros
#define	TEMPHUM21_STATUS_NORMAL_OP 0x00
	TempHum 21 status/diagnostic/response bits.

#define	TEMPHUM21_STATUS_STALE_DATA 0x40

#define	TEMPHUM21_STATUS_COMMAND_MODE 0x80

#define	TEMPHUM21_STATUS_BIT_MASK 0xC0

#define	TEMPHUM21_DIAGNOSTIC_CORR_EP_ERR 0x04

#define	TEMPHUM21_DIAGNOSTIC_UNCORR_EP_ERR 0x08

#define	TEMPHUM21_DIAGNOSTIC_RAM_PAR_ERR 0x10

#define	TEMPHUM21_DIAGNOSTIC_CONFIG_ERR 0x20

#define	TEMPHUM21_DIAGNOSTIC_BIT_MASK 0x3C

#define	TEMPHUM21_RESPONSE_BUSY 0x00

#define	TEMPHUM21_RESPONSE_ACK 0x01

#define	TEMPHUM21_RESPONSE_NACK 0x02

#define	TEMPHUM21_RESPONSE_BIT_MASK 0x03

#define	TEMPHUM21_DATA_RES 0x3FFF
	TempHum 21 measurement calculation values.

#define	TEMPHUM21_TEMP_RES 165.0

#define	TEMPHUM21_TEMP_OFFSET 40.0

#define	TEMPHUM21_HUM_RES 100.0

#define	TEMPHUM21_ALARM_HIGH_ON_80PCT 0x3333
	TempHum 21 alarm configuration values.

#define	TEMPHUM21_ALARM_HIGH_OFF_75PCT 0x3000

#define	TEMPHUM21_ALARM_LOW_ON_20PCT 0x0CCD

#define	TEMPHUM21_ALARM_LOW_OFF_25PCT 0x1000

#define	TEMPHUM21_SET_DEV_ADDR 0x27
	TempHum 21 device address setting.

Detailed Description

Settings for registers of TempHum 21 Click driver.

Macro Definition Documentation

◆ TEMPHUM21_ALARM_HIGH_OFF_75PCT

#define TEMPHUM21_ALARM_HIGH_OFF_75PCT 0x3000

◆ TEMPHUM21_ALARM_HIGH_ON_80PCT

#define TEMPHUM21_ALARM_HIGH_ON_80PCT 0x3333

TempHum 21 alarm configuration values.

Specified alarm configuration values of TempHum 21 Click driver.

◆ TEMPHUM21_ALARM_LOW_OFF_25PCT

#define TEMPHUM21_ALARM_LOW_OFF_25PCT 0x1000

◆ TEMPHUM21_ALARM_LOW_ON_20PCT

#define TEMPHUM21_ALARM_LOW_ON_20PCT 0x0CCD

◆ TEMPHUM21_DATA_RES

#define TEMPHUM21_DATA_RES 0x3FFF

TempHum 21 measurement calculation values.

Specified measurement calculation values of TempHum 21 Click driver.

◆ TEMPHUM21_DIAGNOSTIC_BIT_MASK

#define TEMPHUM21_DIAGNOSTIC_BIT_MASK 0x3C

◆ TEMPHUM21_DIAGNOSTIC_CONFIG_ERR

#define TEMPHUM21_DIAGNOSTIC_CONFIG_ERR 0x20

◆ TEMPHUM21_DIAGNOSTIC_CORR_EP_ERR

#define TEMPHUM21_DIAGNOSTIC_CORR_EP_ERR 0x04

◆ TEMPHUM21_DIAGNOSTIC_RAM_PAR_ERR

#define TEMPHUM21_DIAGNOSTIC_RAM_PAR_ERR 0x10

◆ TEMPHUM21_DIAGNOSTIC_UNCORR_EP_ERR

#define TEMPHUM21_DIAGNOSTIC_UNCORR_EP_ERR 0x08

◆ TEMPHUM21_HUM_RES

#define TEMPHUM21_HUM_RES 100.0

◆ TEMPHUM21_RESPONSE_ACK

#define TEMPHUM21_RESPONSE_ACK 0x01

◆ TEMPHUM21_RESPONSE_BIT_MASK

#define TEMPHUM21_RESPONSE_BIT_MASK 0x03

◆ TEMPHUM21_RESPONSE_BUSY

#define TEMPHUM21_RESPONSE_BUSY 0x00

◆ TEMPHUM21_RESPONSE_NACK

#define TEMPHUM21_RESPONSE_NACK 0x02

◆ TEMPHUM21_SET_DEV_ADDR

#define TEMPHUM21_SET_DEV_ADDR 0x27

TempHum 21 device address setting.

Specified setting for device slave address selection of TempHum 21 Click driver.

◆ TEMPHUM21_STATUS_BIT_MASK

#define TEMPHUM21_STATUS_BIT_MASK 0xC0

◆ TEMPHUM21_STATUS_COMMAND_MODE

#define TEMPHUM21_STATUS_COMMAND_MODE 0x80

◆ TEMPHUM21_STATUS_NORMAL_OP

#define TEMPHUM21_STATUS_NORMAL_OP 0x00

TempHum 21 status/diagnostic/response bits.

Specified status/diagnostic/response bits description of TempHum 21 Click driver.

◆ TEMPHUM21_STATUS_STALE_DATA

#define TEMPHUM21_STATUS_STALE_DATA 0x40

◆ TEMPHUM21_TEMP_OFFSET

#define TEMPHUM21_TEMP_OFFSET 40.0

◆ TEMPHUM21_TEMP_RES

#define TEMPHUM21_TEMP_RES 165.0

Macros