Settings for registers of Thermo K 3 Click driver. More...

Macros
#define	THERMOK3_DUMMY_SIGN_BIT 0x80
	Thermo K 3 output data setting.

#define	THERMOK3_OPEN_THERMOCOUPLE_BIT 0x04

#define	THERMOK3_DEVICE_ID_BIT 0x02

#define	THERMOK3_DATA_RESOLUTION 0x0FFFu
	Thermo K 3 data resolution setting.

#define	THERMOK3_TEMP_RESOLUTION 0.25f

#define	THERMOK3_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE
	Data sample selection.

#define	THERMOK3_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

Detailed Description

Settings for registers of Thermo K 3 Click driver.

Macro Definition Documentation

#define THERMOK3_DATA_RESOLUTION 0x0FFFu

Thermo K 3 data resolution setting.

Specified setting for data resolution of Thermo K 3 Click driver.

#define THERMOK3_DEVICE_ID_BIT 0x02

#define THERMOK3_DUMMY_SIGN_BIT 0x80

Thermo K 3 output data setting.

Specified setting for output data of Thermo K 3 Click driver.

#define THERMOK3_OPEN_THERMOCOUPLE_BIT 0x04

#define THERMOK3_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE

Data sample selection.

This macro sets data samples for SPI modules.

Note: Available only on Microchip PIC family devices. This macro will set data sampling for all SPI modules on MCU. Can be overwritten with thermok3_init which will set SET_SPI_DATA_SAMPLE_MIDDLE by default on the mapped mikrobus.

#define THERMOK3_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE

#define THERMOK3_TEMP_RESOLUTION 0.25f