Settings for registers of XBEE 2 Click driver. More...

Macros
#define	XBEE2_ENTER_CMD_MODE "+++"
	XBEE 2 list of AT commands.

#define	XBEE2_EXIT_CMD_MODE "CN"

#define	XBEE2_FACTORY_RESET "RE"

#define	XBEE2_SET_NODE_IDENTIFIER "NI"

#define	XBEE2_GET_SERIAL_NUMBER "SH,SL"

#define	XBEE2_SET_DEST_ADDR_HIGH "DH"

#define	XBEE2_SET_DEST_ADDR_LOW "DL"

#define	XBEE2_APPLY_CHANGES "AC"

#define	XBEE2_API_MODE "AP"

#define	XBEE2_DEV_ROLE "CE"

#define	XBEE2_SAVE_CHANGES "WR"

#define	XBEE2_CMD_AT "AT"

#define	XBEE2_DELIMITER ","

#define	XBEE2_CARRIAGE_RETURN "\r"

#define	XBEE2_MODE_TRANSPARENT 0
	XBEE 2 mode settings.

#define	XBEE2_MODE_API_WITHOUT_ESC 1

#define	XBEE2_MODE_API_WITH_ESC 2

#define	XBEE2_DEVICE_ROLE_JOIN_NETWORK 0
	XBEE 2 device role settings.

#define	XBEE2_DEVICE_ROLE_FORM_NETWORK 1

#define	XBEE2_BROADCAST_DEST_ADDRESS_HIGH "00000000"
	XBEE 2 destination address settings.

#define	XBEE2_BROADCAST_DEST_ADDRESS_LOW "0000FFFF"

#define	XBEE2_RSP_OK "OK"
	XBEE 2 device response for AT commands.

#define	XBEE2_RSP_ERROR "ERROR"

#define	DRV_BUFFER_SIZE 200
	XBEE 2 driver buffer size.

Detailed Description

Settings for registers of XBEE 2 Click driver.

Macro Definition Documentation

◆ DRV_BUFFER_SIZE

#define DRV_BUFFER_SIZE 200

XBEE 2 driver buffer size.

Specified size of driver ring buffer.

Note: Increase buffer size if needed.

◆ XBEE2_API_MODE

#define XBEE2_API_MODE "AP"

◆ XBEE2_APPLY_CHANGES

#define XBEE2_APPLY_CHANGES "AC"

◆ XBEE2_BROADCAST_DEST_ADDRESS_HIGH

#define XBEE2_BROADCAST_DEST_ADDRESS_HIGH "00000000"

XBEE 2 destination address settings.

Destination address settings of XBEE 2 Click driver.

◆ XBEE2_BROADCAST_DEST_ADDRESS_LOW

#define XBEE2_BROADCAST_DEST_ADDRESS_LOW "0000FFFF"

◆ XBEE2_CARRIAGE_RETURN

#define XBEE2_CARRIAGE_RETURN "\r"

◆ XBEE2_CMD_AT

#define XBEE2_CMD_AT "AT"

◆ XBEE2_DELIMITER

#define XBEE2_DELIMITER ","

◆ XBEE2_DEV_ROLE

#define XBEE2_DEV_ROLE "CE"

◆ XBEE2_DEVICE_ROLE_FORM_NETWORK

#define XBEE2_DEVICE_ROLE_FORM_NETWORK 1

◆ XBEE2_DEVICE_ROLE_JOIN_NETWORK

#define XBEE2_DEVICE_ROLE_JOIN_NETWORK 0

XBEE 2 device role settings.

Device role settings of XBEE 2 Click driver.

◆ XBEE2_ENTER_CMD_MODE

#define XBEE2_ENTER_CMD_MODE "+++"

XBEE 2 list of AT commands.

AT commands list of XBEE 2 Click driver.

◆ XBEE2_EXIT_CMD_MODE

#define XBEE2_EXIT_CMD_MODE "CN"

◆ XBEE2_FACTORY_RESET

#define XBEE2_FACTORY_RESET "RE"

◆ XBEE2_GET_SERIAL_NUMBER

#define XBEE2_GET_SERIAL_NUMBER "SH,SL"

◆ XBEE2_MODE_API_WITH_ESC

#define XBEE2_MODE_API_WITH_ESC 2

◆ XBEE2_MODE_API_WITHOUT_ESC

#define XBEE2_MODE_API_WITHOUT_ESC 1

◆ XBEE2_MODE_TRANSPARENT

#define XBEE2_MODE_TRANSPARENT 0

XBEE 2 mode settings.

Mode settings of XBEE 2 Click driver.

◆ XBEE2_RSP_ERROR

#define XBEE2_RSP_ERROR "ERROR"

◆ XBEE2_RSP_OK

#define XBEE2_RSP_OK "OK"

XBEE 2 device response for AT commands.

Device response after commands.

◆ XBEE2_SAVE_CHANGES

#define XBEE2_SAVE_CHANGES "WR"

◆ XBEE2_SET_DEST_ADDR_HIGH

#define XBEE2_SET_DEST_ADDR_HIGH "DH"

◆ XBEE2_SET_DEST_ADDR_LOW

#define XBEE2_SET_DEST_ADDR_LOW "DL"

◆ XBEE2_SET_NODE_IDENTIFIER

#define XBEE2_SET_NODE_IDENTIFIER "NI"

Macros