Main Page

---

Ambient 23 click

‍Ambient 23 Click is a compact add-on board that measures the intensity of visible light. This board features the VEML3235SL, an advanced ambient light sensor designed by the CMOS process from Vishay Semiconductors that transforms light intensity to a 16-bit digital signal output that can be directly communicated via an I2C interface.

click Product page

---

Click library

• Author : Stefan Ilic
• Date : Apr 2023.
• Type : I2C type

Software Support

We provide a library for the Ambient 23 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for Ambient 23 Click driver.

Standard key functions :

• ambient23_cfg_setup Config Object Initialization function.

  void ambient23_cfg_setup ( ambient23_cfg_t *cfg );

• ambient23_init Initialization function.

  err_t ambient23_init ( ambient23_t *ctx, ambient23_cfg_t *cfg );

• ambient23_default_cfg Click Default Configuration function.

  err_t ambient23_default_cfg ( ambient23_t *ctx );

Example key functions :

• ambient23_reg_read Ambient 23 register reading function.

  err_t ambient23_reg_read ( ambient23_t *ctx, uint8_t reg, uint16_t *data_out );

• ambient23_calculate_res Ambient 23 get conversion data function.

  err_t ambient23_calculate_res ( ambient23_t *ctx, float *conversion_mul );

• ambient23_read_light_data Ambient 23 get light data function.

  err_t ambient23_read_light_data ( ambient23_t *ctx, float *light_data );

Example Description

‍This example demonstrates the use of Ambient 23 click board by measuring the ambient light level in Lux.

The demo application is composed of two sections :

Application Init

‍Initializes the driver, checks communication by reading part ID and performs the click default configuration.

void application_init ( void ) 
{
    log_cfg_t log_cfg;  
    ambient23_cfg_t ambient23_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    ambient23_cfg_setup( &ambient23_cfg );
    AMBIENT23_MAP_MIKROBUS( ambient23_cfg, MIKROBUS_1 );
    if ( I2C_MASTER_ERROR == ambient23_init( &ambient23, &ambient23_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    uint16_t part_id = 0;
    ambient23_reg_read( &ambient23, AMBIENT23_REG_DEVICE_ID, &part_id );
    if ( AMBIENT23_PART_ID != ( uint8_t ) part_id )
    {
        log_error( &logger, " Communication error." );
        for ( ; ; );
    }
    
    if ( AMBIENT23_ERROR == ambient23_default_cfg ( &ambient23 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
}

Application Task

‍Measuring ambient light level by reading data from the Ambient 23 click board and displaying it using UART Serial terminal.

void application_task ( void ) 
{
    float data_tmp;
    
    ambient23_read_light_data( &ambient23, &data_tmp );
    log_printf( &logger, "Data: %.2f lux\r\n", data_tmp );
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Ambient23

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---