Main Page

---

Ambient 8 click

Ambient 8 click is equipped with the ambient light sensor (ALS) IC, providing measurements of the ambient light intensity in a digital format. It utilizes the LTR-329ALS-01, an ALS with the I2C interface.

click Product page

---

Click library

• Author : MikroE Team
• Date : Dec 2019.
• Type : I2C type

Software Support

We provide a library for the Ambient8 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

‍This library contains API for Ambient8 Click driver.

Standard key functions :

• Config Object Initialization function.

  ‍void ambient8_cfg_setup ( ambient8_cfg_t *cfg );

  - Initialization function.

  ‍AMBIENT8_RETVAL ambient8_init ( ambient8_t *ctx, ambient8_cfg_t *cfg );

• Click Default Configuration function.

  ‍void ambient8_default_cfg ( ambient8_t *ctx );

Example key functions :

• This function sets constants ( gain and integration time ) for lux level calculation.

  ‍void ambient8_set_constants ( ambient8_t* ctx );

  - This function checks for new data by polling ALS status register.

  ‍AMBIENT8_RETVAL ambient8_get_als_data ( ambient8_t* ctx, uint16_t* als_data_ch1,uint16_t* als_data_ch0 );

• This function reads and data and performs lux level calculation

  ‍AMBIENT8_RETVAL ambient8_get_lux_level ( ambient8_t* ctx, float* lux_level, float window_factor, float IR_factor );

  Examples Description

‍This example collects data from the sensor, calculates the light intensity and then logs it.

The demo application is composed of two sections :

Application Init

‍Initializes device and I2C driver.

void application_init ( void )
{
    log_cfg_t log_cfg;
    ambient8_cfg_t cfg;
 
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );
 
    //  Click initialization.
 
    ambient8_cfg_setup( &cfg );
    AMBIENT8_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    ambient8_init( &ambient8, &cfg );
 
    window_factor = 1.0;
    IR_factor = 0.0;
}

Application Task

‍Performs Lux calculation based on window and IR factor and log results.

void application_task ( void )
{
    status_flag = ambient8_get_lux_level( &ambient8, &lux_level, window_factor, IR_factor );
 
    if ( status_flag == 0 )
    {
        log_printf( &logger, "Lux level : %.2f lx\r\n", lux_level );
    }
}  

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Ambient8

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---