Main Page

---

Brushless 2 click

Brushless 2 click carries the DRV10964 BLDC motor controller with an integrated output stage.

click Product page

---

Click library

• Author : Nikola peric
• Date : Mar 2022.
• Type : PWM type

Software Support

We provide a library for the Brushless2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

‍This library contains API for Brushless2 Click driver.

Standard key functions :

• Config Object Initialization function.

  ‍void brushless2_cfg_setup ( brushless2_cfg_t *cfg );

  - Initialization function.

  ‍BRUSHLESS2_RETVAL brushless2_init ( brushless2_t *ctx, brushless2_cfg_t *cfg );

  Example key functions :

• Set the direction of rotation in the counterclockwise direction function

  ‍void brushless2_counter_clockwise ( brushless2_t *ctx );

  - Set the direction of rotation in the clockwise direction function

  ‍void brushless2_clockwise ( brushless2_t *ctx );

• Get Interrupt pin state function

  ‍uint8_t brushless2_get_interrupt_status ( brushless2_t *ctx );

  Examples Description

‍This application controlled speed motor.

The demo application is composed of two sections :

Application Init

‍Initialization driver enable's - GPIO, PWM initialization

void application_init ( void )
{
    log_cfg_t log_cfg;
    brushless2_cfg_t cfg;
 
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );
 
    //  Click initialization.
 
    brushless2_cfg_setup( &cfg );
    BRUSHLESS2_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    brushless2_init( &brushless2, &cfg );
    
    log_printf( &logger, "---------------------- \r\n" );
    
    brushless2_set_duty_cycle ( &brushless2, 0.0 );
    brushless2_pwm_start ( &brushless2 );
    Delay_ms ( 500 );
    log_info( &logger, "---- Application Task ----" );
}

Application Task

‍ This is a example which demonstrates the use of Brushless 2 Click board. Brushless 2 Click communicates with register via PWM interface. Results are being sent to the Usart Terminal where you can track their changes.

void application_task ( void )
{    
    static int8_t duty_cnt = 1;
    static int8_t duty_inc = 1;
    float duty = duty_cnt / 10.0;
    
    brushless2_set_duty_cycle ( &brushless2, duty );
    brushless2_clockwise ( &brushless2 );
    log_printf( &logger, "> Duty: %d%%\r\n", ( uint16_t )( duty_cnt * 10 ) );
    
    Delay_ms ( 500 );
    
    if ( 10 == duty_cnt ) 
    {
        duty_inc = -1;
    }
    else if ( 0 == duty_cnt ) 
    {
        duty_inc = 1;
    }
    duty_cnt += duty_inc;
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Brushless2

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---