Here is a list of all macros with links to the files they belong to:

- b -

• BUCK20_ADDRESS_FACTORY_USAGE : buck20.h
• BUCK20_ADDRESS_RDAC1 : buck20.h
• BUCK20_ADDRESS_RDAC2 : buck20.h
• BUCK20_ADDRESS_USER_DATA_0 : buck20.h
• BUCK20_ADDRESS_USER_DATA_1 : buck20.h
• BUCK20_ADDRESS_USER_DATA_10 : buck20.h
• BUCK20_ADDRESS_USER_DATA_11 : buck20.h
• BUCK20_ADDRESS_USER_DATA_12 : buck20.h
• BUCK20_ADDRESS_USER_DATA_2 : buck20.h
• BUCK20_ADDRESS_USER_DATA_3 : buck20.h
• BUCK20_ADDRESS_USER_DATA_4 : buck20.h
• BUCK20_ADDRESS_USER_DATA_5 : buck20.h
• BUCK20_ADDRESS_USER_DATA_6 : buck20.h
• BUCK20_ADDRESS_USER_DATA_7 : buck20.h
• BUCK20_ADDRESS_USER_DATA_8 : buck20.h
• BUCK20_ADDRESS_USER_DATA_9 : buck20.h
• BUCK20_BUCK_R2_KOHM : buck20.h
• BUCK20_BUCK_VREF : buck20.h
• BUCK20_CMD_DECREMENT_6DB : buck20.h
• BUCK20_CMD_DECREMENT_ALL_6DB : buck20.h
• BUCK20_CMD_DECREMENT_ALL_ONE_STEP : buck20.h
• BUCK20_CMD_DECREMENT_ONE_STEP : buck20.h
• BUCK20_CMD_INCREMENT_6DB : buck20.h
• BUCK20_CMD_INCREMENT_ALL_6DB : buck20.h
• BUCK20_CMD_INCREMENT_ALL_ONE_STEP : buck20.h
• BUCK20_CMD_INCREMENT_ONE_STEP : buck20.h
• BUCK20_CMD_NOP : buck20.h
• BUCK20_CMD_READ_EEMEM : buck20.h
• BUCK20_CMD_READ_RDAC : buck20.h
• BUCK20_CMD_RESET_EEMEM : buck20.h
• BUCK20_CMD_RESTORE_EEMEM : buck20.h
• BUCK20_CMD_STORE_RDAC : buck20.h
• BUCK20_CMD_STORE_USER_DATA : buck20.h
• BUCK20_CMD_WRITE_DATA : buck20.h
• BUCK20_DIGIPOT_MAX_KOHM : buck20.h
• BUCK20_MAP_MIKROBUS : buck20.h
• BUCK20_RESISTOR_R6_KOHM : buck20.h
• BUCK20_SET_DATA_SAMPLE_EDGE : buck20.h
• BUCK20_SET_DATA_SAMPLE_MIDDLE : buck20.h
• BUCK20_WIPER_FULL_SCALE : buck20.h
• BUCK20_WIPER_MID_SCALE : buck20.h
• BUCK20_WIPER_ZERO_SCALE : buck20.h

- s -

• SET_SPI_DATA_SAMPLE_EDGE : spi_specifics.h
• SET_SPI_DATA_SAMPLE_MIDDLE : spi_specifics.h