Main Page

---

BUCK 6 click

BUCK 6 click is an advanced synchronous DC-DC step down (buck) converter, with a very wide input voltage range and reasonably high output current.

click Product page

---

Click library

• Author : MikroE Team
• Date : Dec 2019.
• Type : I2C type

Software Support

We provide a library for the BUCK6 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

‍This library contains API for BUCK6 Click driver.

Standard key functions :

• Config Object Initialization function.

  ‍void buck6_cfg_setup ( buck6_cfg_t *cfg );

  - Initialization function.

  ‍BUCK6_RETVAL buck6_init ( buck6_t *ctx, buck6_cfg_t *cfg );

Example key functions :

• Gets reset.

  ‍uint8_t buck6_get_rst( buck6_t *ctx )

  - Set mode.

  ‍void buck6_set_mode( buck6_t *ctx, uint8_t mode);

• Set maximum voltage.

  ‍void buck6_set_max_voltage( buck6_t *ctx, uint8_t voltage );

  Examples Description

‍BUCK 6 click is an advanced synchronous DC-DC step down (buck) converter, with a very wide input voltage range and reasonably high output current.

The demo application is composed of two sections :

Application Init

‍Initialization Driver init and settings chip on ACTIVE mode and setting the maximum range to 5V.

void application_init ( void )
{
    log_cfg_t log_cfg;
    buck6_cfg_t cfg;
 
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );
 
    //  Click initialization.
 
    buck6_cfg_setup( &cfg );
    BUCK6_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    buck6_init( &buck6, &cfg );
}

Application Task

‍Sets the different ranges of the maximum voltage.

void application_task ( void )
{
    buck6_set_max_voltage( &buck6, BUCK6_MAX_RANGE_2500mV );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    buck6_set_max_voltage( &buck6, BUCK6_MAX_RANGE_5000mV );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    buck6_set_max_voltage( &buck6, BUCK6_MAX_RANGE_7500mV );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    buck6_set_max_voltage( &buck6, BUCK6_MAX_RANGE_10000mV );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    buck6_set_max_voltage( &buck6, BUCK6_MAX_RANGE_7500mV );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    buck6_set_max_voltage( &buck6, BUCK6_MAX_RANGE_5000mV );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.BUCK6

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---