canfd3 2.0.0.0
Main Page

CAN FD 3 click

CAN FD 3 Click is a add-on board based on TLE9251V CAN network transceiver, designed for HS CAN networks up to 5 Mbit/s in automotive and industrial applications.

click Product page

Click library

  • Author : MikroE Team
  • Date : Jun 2020.
  • Type : UART type

Software Support

We provide a library for the CanFd3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

‍This library contains API for CanFd3 Click driver.

Standard key functions :

  • Config Object Initialization function.

    ‍void canfd3_cfg_setup ( canfd3_cfg_t *cfg );

    - Initialization function.

    ‍CANFD3_RETVAL canfd3_init ( canfd3_t *ctx, canfd3_cfg_t *cfg );

    Example key functions :

  • Generic read function.

    ‍int32_t canfd3_generic_read ( canfd3_t *ctx, char *data_buf, uint16_t max_len );

    - Generic write function.

    ‍void canfd3_generic_write ( canfd3_t *ctx, char *data_buf, uint16_t len );

  • Sets the CS pin state.

    ‍void canfd3_set_cs_pin ( canfd3_t *ctx, uint8_t mode );

    Examples Description

‍This example reads and processes data from CAN FD 3 clicks.

The demo application is composed of two sections :

Application Init

‍Initializes the driver and enables the click board.

void application_init ( void )
{
log_cfg_t log_cfg;
canfd3_cfg_t cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
canfd3_cfg_setup( &cfg );
CANFD3_MAP_MIKROBUS( cfg, MIKROBUS_1 );
canfd3_init( &canfd3, &cfg );
canfd3_set_cs_pin( &canfd3, CANFD3_MODE_NORMAL );
Delay_ms ( 100 );
}
CANFD3_MAP_MIKROBUS
#define CANFD3_MAP_MIKROBUS(cfg, mikrobus)
Definition canfd3.h:66
CANFD3_MODE_NORMAL
#define CANFD3_MODE_NORMAL
Definition canfd3.h:86
canfd3_init
CANFD3_RETVAL canfd3_init(canfd3_t *ctx, canfd3_cfg_t *cfg)
Initialization function.
canfd3_cfg_setup
void canfd3_cfg_setup(canfd3_cfg_t *cfg)
Config Object Initialization function.
canfd3_set_cs_pin
void canfd3_set_cs_pin(canfd3_t *ctx, uint8_t mode)
Sets the CS pin state.
application_init
void application_init(void)
Definition main.c:65
canfd3_cfg_t
Click configuration structure definition.
Definition canfd3.h:125

Application Task

‍Depending on the selected mode, it reads all the received data or sends the desired message every 2 seconds.

void application_task ( void )
{
#ifdef DEMO_APP_RECEIVER
canfd3_process( );
#endif
#ifdef DEMO_APP_TRANSMITTER
canfd3_generic_write( &canfd3, TEXT_TO_SEND, 8 );
log_info( &logger, "--- The message is sent ---" );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
#endif
}
canfd3_generic_write
void canfd3_generic_write(canfd3_t *ctx, char *data_buf, uint16_t len)
Generic write function.
application_task
void application_task(void)
Definition main.c:93
TEXT_TO_SEND
#define TEXT_TO_SEND
Definition main.c:32

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.CanFd3

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.