Main Page

---

Cap Touch 6 click

‍Cap Touch 6 Click is a compact add-on board that easily integrates projected capacitive touch into users' applications. This board features the IQS227D, a single-channel capacitive controller with an internal voltage regular and reference capacitor from Azoteq. Besides the capacitive sensing area, this board also has output pins for proximity and touch events with their corresponding LED indicators. The IQS227D automatically tracks slow varying environmental changes via various filters.

click Product page

---

Click library

• Author : Stefan Filipovic
• Date : Nov 2022.
• Type : GPIO type

Software Support

We provide a library for the Cap Touch 6 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for Cap Touch 6 Click driver.

Standard key functions :

• captouch6_cfg_setup Config Object Initialization function.

  void captouch6_cfg_setup ( captouch6_cfg_t *cfg );

• captouch6_init Initialization function.

  err_t captouch6_init ( captouch6_t *ctx, captouch6_cfg_t *cfg );

Example key functions :

• captouch6_get_tout_pin This function returns the TOUT pin logic state.

  uint8_t captouch6_get_tout_pin ( captouch6_t *ctx );

• captouch6_get_pout_pin This function returns the POUT pin logic state.

  uint8_t captouch6_get_pout_pin ( captouch6_t *ctx );

Example Description

‍This example demonstrates the use of Cap Touch 6 click board by reading and displaying the touch and proximity events.

The demo application is composed of two sections :

Application Init

‍Initializes the driver and logger.

void application_init ( void )
{
    log_cfg_t log_cfg;  
    captouch6_cfg_t captouch6_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    captouch6_cfg_setup( &captouch6_cfg );
    CAPTOUCH6_MAP_MIKROBUS( captouch6_cfg, MIKROBUS_1 );
    if ( DIGITAL_OUT_UNSUPPORTED_PIN == captouch6_init( &captouch6, &captouch6_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    log_info( &logger, " Application Task " );
}

Application Task

‍Reads the touch and proximity event pins state and displays them on the USB UART on changes.

void application_task ( void )
{
    static uint8_t old_touch_state = 0, old_prox_state = 0;
    uint8_t touch_state = captouch6_get_tout_pin ( &captouch6 );
    uint8_t prox_state = captouch6_get_pout_pin ( &captouch6 );
    if ( ( old_touch_state != touch_state ) || ( old_prox_state != prox_state ) )
    {
        log_printf( &logger, " Touch: %s\r\n", ( char * ) ( !touch_state ? "detected" : "idle" ) );
        log_printf( &logger, " Proximity: %s\r\n\n", ( char * ) ( !prox_state ? "detected" : "idle" ) );
        old_touch_state = touch_state;
        old_prox_state = prox_state;
    }
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.CapTouch6

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---