Main Page

---

Compass 6 click

‍Compass 6 Click is a compact add-on board perfect for implementation in applications such as an electronic compass. This board features the HSCDTD008A, a high-sensitivity geomagnetic sensor from ALPS Alpine.

click Product page

---

Click library

• Author : Luka Filipovic
• Date : Aug 2021.
• Type : I2C type

Software Support

We provide a library for the Compass6 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for Compass6 Click driver.

Standard key functions :

• compass6_cfg_setup Config Object Initialization function.

  void compass6_cfg_setup ( compass6_cfg_t *cfg );

• compass6_init Initialization function.

  err_t compass6_init ( compass6_t *ctx, compass6_cfg_t *cfg );

• compass6_default_cfg Click Default Configuration function.

  err_t compass6_default_cfg ( compass6_t *ctx );

Example key functions :

• compass6_get_axes_data Magnetic axes data reading.

  err_t compass6_get_axes_data ( compass6_t *ctx, compass6_axes_t *axes_data );

• compass6_data_ready Get data ready pin state.

  uint8_t compass6_data_ready ( compass6_t *ctx );

• compass6_generic_read Reading function.

  err_t compass6_generic_read ( compass6_t *ctx, uint8_t reg, uint8_t *rx_data );

Example Description

‍This example is a showcase the ability of the device

to read 3 axis data of magnetic raw value when data is ready.

The demo application is composed of two sections :

Application Init

‍Initialization of communication modules (I2C, UART) and data

ready pin as input. Then reads identification data and checks if some of them have wrong value, and configures device for reading.

void application_init ( void ) 
{
    log_cfg_t log_cfg;  
    compass6_cfg_t compass6_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    compass6_cfg_setup( &compass6_cfg );
    COMPASS6_MAP_MIKROBUS( compass6_cfg, MIKROBUS_1 );
    err_t init_flag = compass6_init( &compass6, &compass6_cfg );
    if ( I2C_MASTER_ERROR == init_flag ) 
    {
        log_error( &logger, " Application Init Error. " );
        log_info( &logger, " Please, run program again... " );
 
        for ( ; ; );
    }
    
    uint8_t temp_data = 0;
    compass6_generic_read( &compass6, COMPASS6_REG_WHO_I_AM, &temp_data );
    log_printf( &logger, " > Who am I: 0x%.2X\r\n", ( uint16_t )temp_data );
    if ( COMPASS6_WHO_AM_I != temp_data )
    {
        log_error( &logger, " Who am I. " );
    }
    
    compass6_generic_read( &compass6, COMPASS6_REG_INFO_VERSION, &temp_data );
    log_printf( &logger, " > Version: 0x%.2X\r\n", ( uint16_t )temp_data );
    if ( COMPASS6_VERSION != temp_data )
    {
        log_error( &logger, " Version. " );
    }
    
    compass6_generic_read( &compass6, COMPASS6_REG_INFO_ALPS, &temp_data );
    log_printf( &logger, " > ALPS: 0x%.2X\r\n", ( uint16_t )temp_data );
    if ( COMPASS6_ALPS != temp_data )
    {
        log_error( &logger, " ALPS. " );
    }
 
    compass6_default_cfg ( &compass6 );
    
    log_info( &logger, " Application Task " );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
}

Application Task

‍Checks Data ready pin and if asserted high it will read data of all

3 axes(x, y, z) and log data to Terminal.

void application_task ( void ) 
{
    if ( compass6_data_ready( &compass6 ) )
    {      
        compass6_axes_t axes_data;
        compass6_get_axes_data( &compass6, &axes_data );
        log_printf( &logger, " > X: %d\r\n", axes_data.x );
        log_printf( &logger, " > Y: %d\r\n", axes_data.y );
        log_printf( &logger, " > Z: %d\r\n", axes_data.z );
        log_printf( &logger, "*********************\r\n" );
    }
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Compass6

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---