Main Page

---

DAC 15 click

‍DAC 15 Click is a compact add-on board that provides a highly accurate digital-to-analog conversion on two channels. This board features the DAC80502, a dual 16-bit 1-LSB INL voltage-output DAC from Texas Instruments. The DAC operates at a wide power supply range and is a low-power device with as low as 1mA per channel at 5.5V. It also includes a 2.5V, 5-ppm/°C internal reference, giving a full-scale voltage buffered output ranges of 1.25V, 2.5V, and 5.5V.

click Product page

---

Click library

• Author : Nenad Filipovic
• Date : Jul 2023.
• Type : I2C/SPI type

Software Support

We provide a library for the DAC 15 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for DAC 15 Click driver.

Standard key functions :

• dac15_cfg_setup Config Object Initialization function.

  void dac15_cfg_setup ( dac15_cfg_t *cfg );

• dac15_init Initialization function.

  err_t dac15_init ( dac15_t *ctx, dac15_cfg_t *cfg );

• dac15_default_cfg Click Default Configuration function.

  err_t dac15_default_cfg ( dac15_t *ctx );

Example key functions :

• dac15_set_dac_data DAC 15 set DAC data function.

  err_t dac15_set_dac_data ( dac15_t *ctx, uint8_t dac_sel, uint16_t dac_data );

• dac15_get_dac_data DAC 15 get DAC data function.

  err_t dac15_get_dac_data ( dac15_t *ctx, uint8_t dac_sel, uint16_t *dac_data );

Example Description

‍This example demonstrates the use of DAC 15 Click board™ by changing the output voltage level on the VOUTA and VOUTB.

The demo application is composed of two sections :

Application Init

‍Initialization of I2C or SPI module and log UART. After driver initialization, the app executes a default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  
    dac15_cfg_t dac15_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    dac15_cfg_setup( &dac15_cfg );
    DAC15_MAP_MIKROBUS( dac15_cfg, MIKROBUS_1 );
    err_t init_flag = dac15_init( &dac15, &dac15_cfg );
    if ( ( I2C_MASTER_ERROR == init_flag ) || ( SPI_MASTER_ERROR == init_flag ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( DAC15_ERROR == dac15_default_cfg ( &dac15 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
    log_printf( &logger, " -------------------\r\n" );
    Delay_ms ( 100 );
}

Application Task

‍The demo application changes the output voltage level on the VOUTA and VOUTB. Results are being sent to the UART Terminal, where you can track their changes.

void application_task ( void )
{   
    static uint16_t dac_data = 0;
    for ( uint16_t n_cnt = 0; n_cnt < 60000; n_cnt += 5000 )
    {
        dac_data = n_cnt;
        if ( DAC15_OK == dac15_set_dac_data( &dac15, DAC15_SET_DAC_A, dac_data ) )
        {
            log_printf( &logger, "VOUTA: %u -> %.2f V\r\n", 
                        dac_data, 
                        ( float ) dac_data * DAC15_VREF_3V3 / DAC15_MAX_DAC_DATA );
        }
        
        dac_data = DAC15_DAC_RES_16BIT - n_cnt;
        if ( DAC15_OK == dac15_set_dac_data( &dac15, DAC15_SET_DAC_B, dac_data ) )
        {
            log_printf( &logger, "VOUTB: %u -> %.2f V\r\n", 
                        dac_data, 
                        ( float ) dac_data * DAC15_VREF_3V3 / DAC15_MAX_DAC_DATA );
        }
        log_printf( &logger, " -------------------\r\n" );
        Delay_ms ( 1000 );
        Delay_ms ( 1000 );
        Delay_ms ( 1000 );
    }
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.DAC15

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---