expand4.h

Go to the documentation of this file.

/*
 * MikroSDK - MikroE Software Development Kit
 * Copyright© 2020 MikroElektronika d.o.o.
 * 
 * Permission is hereby granted, free of charge, to any person 
 * obtaining a copy of this software and associated documentation 
 * files (the "Software"), to deal in the Software without restriction, 
 * including without limitation the rights to use, copy, modify, merge, 
 * publish, distribute, sublicense, and/or sell copies of the Software, 
 * and to permit persons to whom the Software is furnished to do so, 
 * subject to the following conditions:
 * 
 * The above copyright notice and this permission notice shall be 
 * included in all copies or substantial portions of the Software.
 * 
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 
 * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE 
 * OR OTHER DEALINGS IN THE SOFTWARE. 
 */
 
// ----------------------------------------------------------------------------
 
#ifndef EXPAND4_H
#define EXPAND4_H
 
#ifdef PREINIT_SUPPORTED
#include "preinit.h"
#endif
 
#ifdef MikroCCoreVersion
    #if MikroCCoreVersion >= 1
        #include "delays.h"
    #endif
#endif
 
#include "drv_digital_out.h"
#include "drv_digital_in.h"
#include "drv_spi_master.h"
 
// -------------------------------------------------------------- PUBLIC MACROS 
#define EXPAND4_MAP_MIKROBUS( cfg, mikrobus ) \
   cfg.miso  = MIKROBUS( mikrobus, MIKROBUS_MISO ); \
   cfg.mosi  = MIKROBUS( mikrobus, MIKROBUS_MOSI ); \
   cfg.sck   = MIKROBUS( mikrobus, MIKROBUS_SCK ); \
   cfg.cs    = MIKROBUS( mikrobus, MIKROBUS_CS ); \
   cfg.clr = MIKROBUS( mikrobus, MIKROBUS_RST ); \
   cfg.en = MIKROBUS( mikrobus, MIKROBUS_PWM )
#define EXPAND4_RETVAL  uint8_t
 
#define EXPAND4_OK           0x00
#define EXPAND4_INIT_ERROR   0xFF
#define EXPAND4_D0           0x01
#define EXPAND4_D1           0x02
#define EXPAND4_D2           0x04
#define EXPAND4_D3           0x08
#define EXPAND4_D4           0x10
#define EXPAND4_D5           0x20
#define EXPAND4_D6           0x40
#define EXPAND4_D7           0x80
 // End group macro 
// --------------------------------------------------------------- PUBLIC TYPES
typedef struct
{
    // Output pins 
 
    digital_out_t cs;
    digital_out_t clr;
    digital_out_t en;
    
    // Modules 
 
    spi_master_t spi;
    pin_name_t chip_select;
 
} expand4_t;
 
typedef struct
{
    // Communication gpio pins 
 
    pin_name_t miso;
    pin_name_t mosi;
    pin_name_t sck;
    pin_name_t cs;
 
    // Additional gpio pins 
 
    pin_name_t clr;
    pin_name_t en;
 
    // static variable 
 
    uint32_t spi_speed;
    spi_master_mode_t   spi_mode;
    spi_master_chip_select_polarity_t cs_polarity;
 
} expand4_cfg_t;
 
 // End types group
 
// ----------------------------------------------- PUBLIC FUNCTION DECLARATIONS
 
#ifdef __cplusplus
extern "C"{
#endif
 
void expand4_cfg_setup ( expand4_cfg_t *cfg );
 
EXPAND4_RETVAL expand4_init ( expand4_t *ctx, expand4_cfg_t *cfg );
 
void expand4_enable_output ( expand4_t *ctx );
 
void expand4_disable_output ( expand4_t *ctx );
 
void expand4_reset ( expand4_t *ctx );
 
void expand4_write_data ( expand4_t *ctx, uint8_t write_command );
 
void expand4_turn_on_by_position ( expand4_t *ctx, uint8_t position );
 
#ifdef __cplusplus
}
#endif
#endif  // _EXPAND4_H_
 
 // End public_function group
 
// ------------------------------------------------------------------------- END