expand6
2.0.0.0
Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:
- e -
expand6_cfg_setup() :
expand6.h
expand6_check_int() :
expand6.h
EXPAND6_CRC_INX :
expand6.h
EXPAND6_DEV_ADR_GND :
expand6.h
EXPAND6_DEV_ADR_VCC :
expand6.h
EXPAND6_DIVIDER_INX :
expand6.h
EXPAND6_EEPROM_BASE_ADR :
expand6.h
EXPAND6_EEPROM_EN_EEE :
expand6.h
EXPAND6_EEPROM_EN_EERO :
expand6.h
EXPAND6_EEPROM_EN_WDE :
expand6.h
expand6_eeprom_enable() :
expand6.h
EXPAND6_EEPROM_ENABLE_INX :
expand6.h
expand6_generic_read() :
expand6.h
expand6_generic_write() :
expand6.h
expand6_get_pin_out_lvl() :
expand6.h
expand6_get_port_out_lvl() :
expand6.h
EXPAND6_HIGH :
expand6.h
expand6_init() :
expand6.h
EXPAND6_INIT_ERROR :
expand6.h
EXPAND6_INT_INVERTED :
expand6.h
EXPAND6_INT_NORMAL :
expand6.h
EXPAND6_LOW :
expand6.h
EXPAND6_M_PORT_BASE_ADR :
expand6.h
EXPAND6_MAP_MIKROBUS :
expand6.h
EXPAND6_OK :
expand6.h
EXPAND6_PORT0_DIR_INX :
expand6.h
EXPAND6_PORT0_HIGH_Z_INX :
expand6.h
EXPAND6_PORT0_INT_MASK_INX :
expand6.h
EXPAND6_PORT0_INV_INX :
expand6.h
EXPAND6_PORT0_OPEN_DRAIN_HIGH_INX :
expand6.h
EXPAND6_PORT0_OPEN_DRAIN_LOW_INX :
expand6.h
EXPAND6_PORT0_OUT_INX :
expand6.h
EXPAND6_PORT0_PULL_DOWN_INX :
expand6.h
EXPAND6_PORT0_PULL_UP_INX :
expand6.h
EXPAND6_PORT0_SEL_PWM_INX :
expand6.h
EXPAND6_PORT0_SLOW_STRONG_INX :
expand6.h
EXPAND6_PORT0_STRONG_INX :
expand6.h
EXPAND6_PORT1_DIR_INX :
expand6.h
EXPAND6_PORT1_HIGH_Z_INX :
expand6.h
EXPAND6_PORT1_INT_MASK_INX :
expand6.h
EXPAND6_PORT1_INV_INX :
expand6.h
EXPAND6_PORT1_OPEN_DRAIN_HIGH_INX :
expand6.h
EXPAND6_PORT1_OPEN_DRAIN_LOW_INX :
expand6.h
EXPAND6_PORT1_OUT_INX :
expand6.h
EXPAND6_PORT1_PULL_DOWN_INX :
expand6.h
EXPAND6_PORT1_PULL_UP_INX :
expand6.h
EXPAND6_PORT1_SEL_PWM_INX :
expand6.h
EXPAND6_PORT1_SLOW_STRONG_INX :
expand6.h
EXPAND6_PORT1_STRONG_INX :
expand6.h
EXPAND6_PORT2_DIR_INX :
expand6.h
EXPAND6_PORT2_HIGH_Z_INX :
expand6.h
EXPAND6_PORT2_INT_MASK_INX :
expand6.h
EXPAND6_PORT2_INV_INX :
expand6.h
EXPAND6_PORT2_OPEN_DRAIN_HIGH_INX :
expand6.h
EXPAND6_PORT2_OPEN_DRAIN_LOW_INX :
expand6.h
EXPAND6_PORT2_OUT_INX :
expand6.h
EXPAND6_PORT2_PULL_DOWN_INX :
expand6.h
EXPAND6_PORT2_PULL_UP_INX :
expand6.h
EXPAND6_PORT2_SEL_PWM_INX :
expand6.h
EXPAND6_PORT2_SLOW_STRONG_INX :
expand6.h
EXPAND6_PORT2_STRONG_INX :
expand6.h
EXPAND6_PORT3_DIR_INX :
expand6.h
EXPAND6_PORT3_HIGH_Z_INX :
expand6.h
EXPAND6_PORT3_INT_MASK_INX :
expand6.h
EXPAND6_PORT3_INV_INX :
expand6.h
EXPAND6_PORT3_OPEN_DRAIN_HIGH_INX :
expand6.h
EXPAND6_PORT3_OPEN_DRAIN_LOW_INX :
expand6.h
EXPAND6_PORT3_OUT_INX :
expand6.h
EXPAND6_PORT3_PULL_DOWN_INX :
expand6.h
EXPAND6_PORT3_PULL_UP_INX :
expand6.h
EXPAND6_PORT3_SEL_PWM_INX :
expand6.h
EXPAND6_PORT3_SLOW_STRONG_INX :
expand6.h
EXPAND6_PORT3_STRONG_INX :
expand6.h
EXPAND6_PORT4_DIR_INX :
expand6.h
EXPAND6_PORT4_HIGH_Z_INX :
expand6.h
EXPAND6_PORT4_INT_MASK_INX :
expand6.h
EXPAND6_PORT4_INV_INX :
expand6.h
EXPAND6_PORT4_OPEN_DRAIN_HIGH_INX :
expand6.h
EXPAND6_PORT4_OPEN_DRAIN_LOW_INX :
expand6.h
EXPAND6_PORT4_OUT_INX :
expand6.h
EXPAND6_PORT4_PULL_DOWN_INX :
expand6.h
EXPAND6_PORT4_PULL_UP_INX :
expand6.h
EXPAND6_PORT4_SEL_PWM_INX :
expand6.h
EXPAND6_PORT4_SLOW_STRONG_INX :
expand6.h
EXPAND6_PORT4_STRONG_INX :
expand6.h
EXPAND6_PORT5_DIR_INX :
expand6.h
EXPAND6_PORT5_HIGH_Z_INX :
expand6.h
EXPAND6_PORT5_INT_MASK_INX :
expand6.h
EXPAND6_PORT5_INV_INX :
expand6.h
EXPAND6_PORT5_OPEN_DRAIN_HIGH_INX :
expand6.h
EXPAND6_PORT5_OPEN_DRAIN_LOW_INX :
expand6.h
EXPAND6_PORT5_OUT_INX :
expand6.h
EXPAND6_PORT5_PULL_DOWN_INX :
expand6.h
EXPAND6_PORT5_PULL_UP_INX :
expand6.h
EXPAND6_PORT5_SEL_PWM_INX :
expand6.h
EXPAND6_PORT5_SLOW_STRONG_INX :
expand6.h
EXPAND6_PORT5_STRONG_INX :
expand6.h
EXPAND6_PORT6_DIR_INX :
expand6.h
EXPAND6_PORT6_HIGH_Z_INX :
expand6.h
EXPAND6_PORT6_INT_MASK_INX :
expand6.h
EXPAND6_PORT6_INV_INX :
expand6.h
EXPAND6_PORT6_OPEN_DRAIN_HIGH_INX :
expand6.h
EXPAND6_PORT6_OPEN_DRAIN_LOW_INX :
expand6.h
EXPAND6_PORT6_OUT_INX :
expand6.h
EXPAND6_PORT6_PULL_DOWN_INX :
expand6.h
EXPAND6_PORT6_PULL_UP_INX :
expand6.h
EXPAND6_PORT6_SEL_PWM_INX :
expand6.h
EXPAND6_PORT6_SLOW_STRONG_INX :
expand6.h
EXPAND6_PORT6_STRONG_INX :
expand6.h
EXPAND6_PORT7_DIR_INX :
expand6.h
EXPAND6_PORT7_HIGH_Z_INX :
expand6.h
EXPAND6_PORT7_INT_MASK_INX :
expand6.h
EXPAND6_PORT7_INV_INX :
expand6.h
EXPAND6_PORT7_OPEN_DRAIN_HIGH_INX :
expand6.h
EXPAND6_PORT7_OPEN_DRAIN_LOW_INX :
expand6.h
EXPAND6_PORT7_OUT_INX :
expand6.h
EXPAND6_PORT7_PULL_DOWN_INX :
expand6.h
EXPAND6_PORT7_PULL_UP_INX :
expand6.h
EXPAND6_PORT7_SEL_PWM_INX :
expand6.h
EXPAND6_PORT7_SLOW_STRONG_INX :
expand6.h
EXPAND6_PORT7_STRONG_INX :
expand6.h
EXPAND6_PORT_0 :
expand6.h
EXPAND6_PORT_1 :
expand6.h
EXPAND6_PORT_2 :
expand6.h
EXPAND6_PWM0_CFG_INX :
expand6.h
EXPAND6_PWM0_PERIOD_INX :
expand6.h
EXPAND6_PWM0_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM10_CFG_INX :
expand6.h
EXPAND6_PWM10_PERIOD_INX :
expand6.h
EXPAND6_PWM10_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM11_CFG_INX :
expand6.h
EXPAND6_PWM11_PERIOD_INX :
expand6.h
EXPAND6_PWM11_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM12_CFG_INX :
expand6.h
EXPAND6_PWM12_PERIOD_INX :
expand6.h
EXPAND6_PWM12_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM13_CFG_INX :
expand6.h
EXPAND6_PWM13_PERIOD_INX :
expand6.h
EXPAND6_PWM13_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM14_CFG_INX :
expand6.h
EXPAND6_PWM14_PERIOD_INX :
expand6.h
EXPAND6_PWM14_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM15_CFG_INX :
expand6.h
EXPAND6_PWM15_PERIOD_INX :
expand6.h
EXPAND6_PWM15_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM1_CFG_INX :
expand6.h
EXPAND6_PWM1_PERIOD_INX :
expand6.h
EXPAND6_PWM1_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM2_CFG_INX :
expand6.h
EXPAND6_PWM2_PERIOD_INX :
expand6.h
EXPAND6_PWM2_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM3_CFG_INX :
expand6.h
EXPAND6_PWM3_PERIOD_INX :
expand6.h
EXPAND6_PWM3_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM4_CFG_INX :
expand6.h
EXPAND6_PWM4_PERIOD_INX :
expand6.h
EXPAND6_PWM4_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM5_CFG_INX :
expand6.h
EXPAND6_PWM5_PERIOD_INX :
expand6.h
EXPAND6_PWM5_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM6_CFG_INX :
expand6.h
EXPAND6_PWM6_PERIOD_INX :
expand6.h
EXPAND6_PWM6_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM7_CFG_INX :
expand6.h
EXPAND6_PWM7_PERIOD_INX :
expand6.h
EXPAND6_PWM7_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM8_CFG_INX :
expand6.h
EXPAND6_PWM8_PERIOD_INX :
expand6.h
EXPAND6_PWM8_PULSE_WIDTH_INX :
expand6.h
EXPAND6_PWM9_CFG_INX :
expand6.h
EXPAND6_PWM9_PERIOD_INX :
expand6.h
EXPAND6_PWM9_PULSE_WIDTH_INX :
expand6.h
expand6_pwm_cfg() :
expand6.h
EXPAND6_PWM_CLK_SRC_1_5_MHZ :
expand6.h
EXPAND6_PWM_CLK_SRC_24_MHZ :
expand6.h
EXPAND6_PWM_CLK_SRC_32_KHZ :
expand6.h
EXPAND6_PWM_CLK_SRC_367_6_HZ :
expand6.h
EXPAND6_PWM_CLK_SRC_93_75_KHZ :
expand6.h
EXPAND6_PWM_CLK_SRC_PREV :
expand6.h
expand6_read_bit() :
expand6.h
expand6_read_byte() :
expand6.h
EXPAND6_READ_DEV_CFG :
expand6.h
expand6_read_eeprom() :
expand6.h
EXPAND6_READ_EEPROM_POR :
expand6.h
expand6_read_pin() :
expand6.h
expand6_read_port() :
expand6.h
expand6_read_port_exp() :
expand6.h
EXPAND6_RECFG_DEV_TO_POR :
expand6.h
EXPAND6_REG_CFG_PWM_ADR :
expand6.h
EXPAND6_REG_CMD_ADR :
expand6.h
EXPAND6_REG_DEV_ID_ADR :
expand6.h
EXPAND6_REG_DIVIDER_ADR :
expand6.h
EXPAND6_REG_EEPROM_ADR :
expand6.h
EXPAND6_REG_HIGH_Z_ADR :
expand6.h
EXPAND6_REG_IN_PORT0_ADR :
expand6.h
EXPAND6_REG_IN_PORT1_ADR :
expand6.h
EXPAND6_REG_IN_PORT2_ADR :
expand6.h
EXPAND6_REG_IN_PORT3_ADR :
expand6.h
EXPAND6_REG_IN_PORT4_ADR :
expand6.h
EXPAND6_REG_IN_PORT5_ADR :
expand6.h
EXPAND6_REG_IN_PORT6_ADR :
expand6.h
EXPAND6_REG_IN_PORT7_ADR :
expand6.h
EXPAND6_REG_INT_MASK_ADR :
expand6.h
EXPAND6_REG_INT_STAT_PORT0_ADR :
expand6.h
EXPAND6_REG_INT_STAT_PORT1_ADR :
expand6.h
EXPAND6_REG_INT_STAT_PORT2_ADR :
expand6.h
EXPAND6_REG_INT_STAT_PORT3_ADR :
expand6.h
EXPAND6_REG_INT_STAT_PORT4_ADR :
expand6.h
EXPAND6_REG_INT_STAT_PORT5_ADR :
expand6.h
EXPAND6_REG_INT_STAT_PORT6_ADR :
expand6.h
EXPAND6_REG_INT_STAT_PORT7_ADR :
expand6.h
EXPAND6_REG_INV_ADR :
expand6.h
EXPAND6_REG_OPEN_DRAIN_HIGH_ADR :
expand6.h
EXPAND6_REG_OPEN_DRAIN_LOW_ADR :
expand6.h
EXPAND6_REG_OUT_PORT0_ADR :
expand6.h
EXPAND6_REG_OUT_PORT1_ADR :
expand6.h
EXPAND6_REG_OUT_PORT2_ADR :
expand6.h
EXPAND6_REG_OUT_PORT3_ADR :
expand6.h
EXPAND6_REG_OUT_PORT4_ADR :
expand6.h
EXPAND6_REG_OUT_PORT5_ADR :
expand6.h
EXPAND6_REG_OUT_PORT6_ADR :
expand6.h
EXPAND6_REG_OUT_PORT7_ADR :
expand6.h
EXPAND6_REG_PERIOD_PWM_ADR :
expand6.h
EXPAND6_REG_PORT_DIR_ADR :
expand6.h
EXPAND6_REG_PORT_SEL_ADR :
expand6.h
EXPAND6_REG_PULL_DOWN_ADR :
expand6.h
EXPAND6_REG_PULL_UP_ADR :
expand6.h
EXPAND6_REG_PULSE_WIDTH_PWM_ADR :
expand6.h
EXPAND6_REG_PWM_SEL_ADR :
expand6.h
EXPAND6_REG_RSRVD_1_ADR :
expand6.h
EXPAND6_REG_RSRVD_2_ADR :
expand6.h
EXPAND6_REG_RSRVD_3_ADR :
expand6.h
EXPAND6_REG_RSRVD_4_ADR :
expand6.h
EXPAND6_REG_SEL_PWM_OUT_ADR :
expand6.h
EXPAND6_REG_SLOW_STRONG_ADR :
expand6.h
EXPAND6_REG_STRONG_ADR :
expand6.h
EXPAND6_REG_WDT_ADR :
expand6.h
expand6_reset() :
expand6.h
EXPAND6_RESTORE_DEFAULTS :
expand6.h
EXPAND6_RETVAL :
expand6.h
EXPAND6_SEL_PWM_0 :
expand6.h
EXPAND6_SEL_PWM_1 :
expand6.h
EXPAND6_SEL_PWM_2 :
expand6.h
EXPAND6_SEL_PWM_3 :
expand6.h
expand6_sel_pwm_pin() :
expand6.h
expand6_send_eeprom_cmd() :
expand6.h
EXPAND6_STORE_POR_CFG_TO_EEPROM :
expand6.h
expand6_write_bit() :
expand6.h
expand6_write_byte() :
expand6.h
EXPAND6_WRITE_DEV_CFG :
expand6.h
expand6_write_eeprom() :
expand6.h
EXPAND6_WRITE_EEPROM_POR :
expand6.h
expand6_write_pin() :
expand6.h
expand6_write_port() :
expand6.h
expand6_write_port_exp() :
expand6.h