Main Page

---

EZO Carrier EC click

‍EZO Carrier Click - Conductivity is a compact add-on board for measuring conductivity, salinity, and Total Dissolved Solids (TDS) in various applications from chemical production to hydroponics. This board features the EZO-EC™, an ISO 7888 compliant embedded conductivity circuit board from Atlas Scientific.

click Product page

---

Click library

• Author : Stefan Ilic
• Date : Oct 2023.
• Type : UART type

Software Support

We provide a library for the EZO Carrier EC Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

‍This library contains API for EZO Carrier EC Click driver.

Standard key functions :

• ezocarrierec_cfg_setup Config Object Initialization function.

  void ezocarrierec_cfg_setup ( ezocarrierec_cfg_t *cfg );

• ezocarrierec_init Initialization function.

  err_t ezocarrierec_init ( ezocarrierec_t *ctx, ezocarrierec_cfg_t *cfg );

Example key functions :

• ezocarrierec_send_cmd Send command function.

  void ezocarrierec_send_cmd ( ezocarrierec_t *ctx, uint8_t *cmd );

• ezocarrierec_send_cmd_with_par Send command function with parameter.

  void ezocarrierec_send_cmd_with_par ( ezocarrierec_t *ctx, uint8_t *cmd, uint8_t *param_buf );

• ezocarrierec_send_cmd_check Check the sent command.

  void ezocarrierec_send_cmd_check ( ezocarrierec_t *ctx, uint8_t *cmd );

Example Description

‍This example demonstrates the use of EZO Carrier EC click board by processing the incoming data and displaying them on the USB UART.

The demo application is composed of two sections :

Application Init

‍Initializes the driver, performs the click default factory reset, and single point calibration.

void application_init ( void ) 
{
    log_cfg_t log_cfg;  
    ezocarrierec_cfg_t ezocarrierec_cfg;  
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );
 
    // Click initialization.
    ezocarrierec_cfg_setup( &ezocarrierec_cfg );
    EZOCARRIEREC_MAP_MIKROBUS( ezocarrierec_cfg, MIKROBUS_1 );
    if ( UART_ERROR == ezocarrierec_init( &ezocarrierec, &ezocarrierec_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
 
    log_printf( &logger, "Device status \r\n" );
    ezocarrierec_send_cmd( &ezocarrierec, EZOCARRIEREC_CMD_STATUS );
    error_flag = ezocarrierec_rsp_check( &ezocarrierec, EZOCARRIEREC_RSP_OK );
    ezocarrierec_error_check( error_flag );
 
    log_printf( &logger, "Factory reset \r\n" );
    ezocarrierec_send_cmd( &ezocarrierec, EZOCARRIEREC_CMD_FACTORY );
    error_flag = ezocarrierec_rsp_check( &ezocarrierec, EZOCARRIEREC_RSP_READY );
    ezocarrierec_error_check( error_flag );
 
    #define PROBE_TYPE   "1.0"
    log_printf( &logger, "Seting Probe type \r\n" );
    ezocarrierec_send_cmd_with_par( &ezocarrierec, EZOCARRIEREC_CMD_SET_PROBE_TYPE, PROBE_TYPE );
    error_flag = ezocarrierec_rsp_check( &ezocarrierec, EZOCARRIEREC_RSP_OK );
    ezocarrierec_error_check( error_flag );
 
    log_printf( &logger, "Device info \r\n" );
    ezocarrierec_send_cmd( &ezocarrierec, EZOCARRIEREC_CMD_DEV_INFO );
    error_flag = ezocarrierec_rsp_check( &ezocarrierec, EZOCARRIEREC_RSP_OK );
    ezocarrierec_error_check( error_flag );
 
    #define DRY_CALIBRATION   "dry"
    log_printf( &logger, "Dry calibration \r\n" );
    ezocarrierec_send_cmd_with_par( &ezocarrierec, EZOCARRIEREC_CMD_CAL, DRY_CALIBRATION );
    error_flag = ezocarrierec_rsp_check( &ezocarrierec, EZOCARRIEREC_RSP_OK );
    ezocarrierec_error_check( error_flag );
 
    uint8_t n_cnt = 0;
    uint8_t last_reading[ APP_BUFFER_SIZE ] = { 0 };
    ezocarrierec_clear_app_buf( );
    ezocarrierec_send_cmd( &ezocarrierec, EZOCARRIEREC_CMD_SINGLE_READ );
    ezocarrierec_process ( &ezocarrierec );
    strcpy( last_reading, app_buf );
    log_printf( &logger, "Single point calibration \r\n" );
    log_printf( &logger, "Waiting for stable readings \r\n" );
    while ( n_cnt <= 5 )
    {
        if ( EZOCARRIEREC_OK == ezocarrierec_process ( &ezocarrierec ) )
        {  
            if ( 0 == strstr( app_buf, last_reading ) )
            {
                n_cnt++;
            }
            else
            {
                strcpy( last_reading, app_buf );
                n_cnt = 0;
            }
        }
        log_printf( &logger, "- " );
        Delay_ms ( 1000 );
        ezocarrierec_clear_app_buf( );
    }
    #define CALIBRATION_VALUE   "80"
    log_printf( &logger, "Calibration \r\n" );
    ezocarrierec_send_cmd_with_par( &ezocarrierec, EZOCARRIEREC_CMD_CAL, CALIBRATION_VALUE );
    error_flag = ezocarrierec_rsp_check( &ezocarrierec, EZOCARRIEREC_RSP_OK );
    ezocarrierec_error_check( error_flag );
 
    #define DISABLE_CONT_READ   "0"
    log_printf( &logger, "Disable continuous reading mode \r\n" );
    ezocarrierec_send_cmd_with_par( &ezocarrierec, EZOCARRIEREC_CMD_CONT_READ, DISABLE_CONT_READ );
    error_flag = ezocarrierec_rsp_check( &ezocarrierec, EZOCARRIEREC_RSP_OK );
    ezocarrierec_error_check( error_flag );
 
    log_info( &logger, " Application Task " );
}

Application Task

‍Reads and processes all incoming conductivity data from the probe, and displays them on the USB UART in uS.

void application_task ( void ) 
{
    log_printf( &logger, "Reading... \r\n" );
    ezocarrierec_send_cmd( &ezocarrierec, EZOCARRIEREC_CMD_SINGLE_READ );
    error_flag = ezocarrierec_rsp_check( &ezocarrierec, EZOCARRIEREC_RSP_OK );
    ezocarrierec_error_check( error_flag );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.EZOCarrierEC

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---